Monday, February 22nd 2021
TechPowerUp GPU-Z v2.37.0 Released
TechPowerUp today released the latest version of TechPowerUp GPU-Z, the popular video sub-system information, monitoring, and diagnostic utility, for PC enthusiasts and gamers. The latest version, 2.37.0 adds support for new GPUs, and improves the user interface in many ways. To begin with, supported is added for the upcoming GeForce RTX 3060, and recently launched GPUs, such as the RTX 3080 Mobile, RTX 3070 Mobile, RTX 3060 Mobile, compute accelerators such as the A6000, A40, A100-SXM4-40 GB, Drive PX2, P106M, and professional-visualization cards such as the Quadro K510M, and Tesla K20M modded to Quadro K6000. On the AMD side, we have preliminary support added for the upcoming Radeon RX 6700 series and RX 6600 series.
Among the many feature updates, fixes, and improvements we've made with GPU-Z 2.37.0 are detection for memory vendors on graphics cards based on RDNA and RDNA2 graphics architectures. A workaround has been added for a hardware bug in NVIDIA Ampere's PCIe controller. Filtering has been added for EVGA iCX sensor misreading. Fake GPU detection for "GT218" silicon has been improved. Lastly, we've brushed up our Russian translation. Grab GPU-Z from the link below.
DOWNLOAD: TechPowerUp GPU-Z 2.37.0
The change-log follows.
Among the many feature updates, fixes, and improvements we've made with GPU-Z 2.37.0 are detection for memory vendors on graphics cards based on RDNA and RDNA2 graphics architectures. A workaround has been added for a hardware bug in NVIDIA Ampere's PCIe controller. Filtering has been added for EVGA iCX sensor misreading. Fake GPU detection for "GT218" silicon has been improved. Lastly, we've brushed up our Russian translation. Grab GPU-Z from the link below.
DOWNLOAD: TechPowerUp GPU-Z 2.37.0
- Added memory vendor detection on Navi 1x and Navi 2x
- Added workaround for NVIDIA Ampere PCIe hardware bug
- Added filter to avoid misreadings on EVGA iCX
- Fixed fake detection for some GT218 variants
- Improved Russian translation
- Added preliminary support for Radeon RX 6700 and RX 6600 Series
- Added support for NVIDIA GeForce RTX 3060, RTX 3080 Mobile, RTX 3070 Mobile, RTX 3060 Mobile, RTX A6000, A40, A100-SXM4-40GB, Drive PX2, P106M, Quadro K510M, modded Quadro K6000
- Added support for additional variants of NVIDIA GTX 1650 Max-Q, Quadro P1000, GTX 650, GT 430
- Added support for AMD Cezanne, Radeon Pro V520, R9 290X ES, Barco MXRT 2600
- Added support for Intel Comet Lake Graphics (Celeron 5205U and i7-10810U)
- Added vendor detection for Yeston
9 Comments on TechPowerUp GPU-Z v2.37.0 Released
Question: are they supposed to be the same temperature? They seem to be within 0.1 from each other, at most.
Oof, I guess this is what happens when you have idle fan stop lol
Is there a reason why GPUZ reads VDDCI (mV) - the I/O bus voltage, instead of mvdd of the actual gddr6 on navi1?
For ex. the micron gddr6 on nav1 runs at 1.35V (mvdd) - this is actual gddr6 chip voltage.
GPUZ instead shows VDDCI (mV) - the I/O bus voltage - which runs at 850mv as "Memory Voltage"
The 3090FE for example has an up to 20 degrees delta, and that is consider in spec.
Generally large dies like the GA102 has higher delta, because it is harder to maintain an even mounting pressure across a larger surface.
My 2080ti with a Bykski waterblock has around 14C delta, about the same as my friend's Seahawk EK that has a factory installed block.