Monday, March 15th 2021

ARCTIC Introduces New MX-5 Thermal Compound

ARCTIC, one of the leading manufacturers of low-noise PC coolers and components, officially launches its MX-5 thermal paste today. The newly developed, high-performance paste comes with an ideal set of thermal properties, guaranteeing reliable heat dissipation over long periods of time. ARCTIC MX-5 is available now in variants ranging from 2 to 50 grams, with and without a spatula.

Like all thermal pastes from ARCTIC, MX-5 is completely metal-free. Because MX-5 is neither conductive nor capacitive, it is particularly safe to use: the possibility of short circuits, corrosion damage or discharges is eliminated.
Regardless of the application method, applying MX-5 is very easy thanks to its low viscosity. The paste can be evenly distributed across the CPU in an extremely thin film via contact pressure from the heat sink. Combined with high thermal conductivity, this results in very low thermal resistance, which can contribute to improved service life and processor performance

MX-5 uses carbon microparticles as a filler to smooth out small imperfections on heatsinks and heatspreaders, improving heat transfer from the component to the heat sink. It is suitable for use on all CPUs and GPUs, whether they are in PCs, laptops or consoles. MX-5 is also recommended for integrated circuits with high waste heat and for power semiconductor devices.

Availability
The MX-5 is available now atAmazon with a starting price of $5.89 USD.
Add your own comment

56 Comments on ARCTIC Introduces New MX-5 Thermal Compound

#51
basco
now with eng subs.

min 01:33 viscosity visual
temps from 02:09
Posted on Reply
#52
lexluthermiester
basco
now with eng subs.

min 01:33 viscosity visual
temps from 02:09
So the jist of the video is that MX5 is damn good and well worth the money spent! What a shocking revelation...
Posted on Reply
#53
bobbybluz
Hmmm, I wonder why Gelid GC Extreme isn't on the comparison list? In any case I'm ordering up some MX5 to add to my thermal paste collection.
Posted on Reply
#54
lexluthermiester
bobbybluzHmmm, I wonder why Gelid GC Extreme isn't on the comparison list?
Maybe they didn't have any to test?
Posted on Reply
#55
bobbybluz
lexluthermiesterMaybe they didn't have any to test?
Gelid GC Extreme has usually tested slightly better than MX4 in most breakdowns I've seen. It's also been my choice for my own PC's for several years. MX4 and 5 are a slightly better value though. I've been using MX4 on GPU's for a while now with no complaints. I also have it in two PC AIO's for testing at the moment.
Posted on Reply
#56
visubie
Have a 4G tube of MX5 which I got from Amazon for 6 and change and a 4G tube of NT1. First application of MX5 was done with a line and spread method. Ended up being a lil too much as I use this method with MX4. Fans went nuts. Removed and did a pea size spread still very thin. Due to thickness even the very thin application did wonders. So I’m going with MX5 does better very thin than a nominal amount. NT1 speaks for its self. MX5 will be my back up seeing as NT1 has only a 2 year shelf life and MX5 at least 5 years. I change paste every 6-8 months anyways. Either is good for a bare gpu/cpu with out a heat spreader or de-lid job. MX5 is a bit harder to remove than NT1 due to thickness. Some will appreciate that. Some will go through Q-Tips like crazy lol. Likely why pump out has a tuff time with MX5.
Posted on Reply
Add your own comment
Nov 20th, 2026 05:53 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts