Thursday, May 23rd 2024
NVIDIA RTX 5090 "Blackwell" Founders Edition to Implement the "RTX 4090 Ti" Cinderblock Design
NVIDIA's upcoming GeForce RTX 5090 Founders Edition graphics card may implement a design closely resembling the cinder block product design the company readied for its RTX 4090 Ti graphics card that never materialized into a marketable product. This sees a 4-slot thick board design, with a slender main logic PCB arranged along the plane of the motherboard, on top of which the cooling solution is mounted perpendicular to the plane, as shown in the images below. This main logic board contains the GPU, memory, and VRM. There two additional PCBs—one has the display I/O, and the other has the PCIe interface. There is a fourth disaggregated component, the 12V-2x6 receptacle, located somewhere along the top of the cooling solution.
Confirmation of NVIDIA using the RTX 4090 Ti "cinder block" board design for the RTX 5090 comes from kopite7kimi, a reliable source with NVIDIA leaks. Kopite7kimi mentions a card that has a "Main Board, IO Rigid Board and a separate PCIE slot component (perhaps it should not be considered as the third PCB)," which perfectly describes with the RTX 4090 Ti. NVIDIA had completed the design phase of this card, which made it to its cooling solution OEM (which is likely where the images leaked out from). The company probably decided against launching this product because the AMD Radeon RX 7900 XTX fell significantly short of the performance proposition of the RTX 4090.
Source:
kopite7kimi (Twitter)
Confirmation of NVIDIA using the RTX 4090 Ti "cinder block" board design for the RTX 5090 comes from kopite7kimi, a reliable source with NVIDIA leaks. Kopite7kimi mentions a card that has a "Main Board, IO Rigid Board and a separate PCIE slot component (perhaps it should not be considered as the third PCB)," which perfectly describes with the RTX 4090 Ti. NVIDIA had completed the design phase of this card, which made it to its cooling solution OEM (which is likely where the images leaked out from). The company probably decided against launching this product because the AMD Radeon RX 7900 XTX fell significantly short of the performance proposition of the RTX 4090.





118 Comments on NVIDIA RTX 5090 "Blackwell" Founders Edition to Implement the "RTX 4090 Ti" Cinderblock Design
(I'll get me coat...)
ATX motherboard design is so out of date for dGPUs now.
We need something mATX-sized with a single PCIE x16 slot at the top, and then the three slots below it are just low-profile things like CMOS battery, M.2 slots, chipset maybe. There's no way you're plugging anything into the 5th or 6th slot of an ATX board with this, that'll block the fans of your 600W GPU which is a huge problem, and those few ATX boards with a 7th slot are usually just a token x1 hanging off the chipset for a 2nd NIC or BT card.
And what's even more disastrous, is the overall, global acceptance of power hungry cards, thus throwing the power efficiency out of the window. They really could sell cards with lower clocks, and voltage, hence no need for huge enormous cooling solutions. And everyone wanting higher clocks, could do so, because there would be a room for such endeavours.
It's about time these cards came with a full cover block, chances are if you have the cash to buy these, you have a custom loop.
If not, it should come with some sort of CLC liquid cooler. Even if i did have the cash i'd rather pass than shoe horn this turd into my case.
I can't wait to see some of the scoffers trying to fit one of these in their case :laugh:
there Needs to come a hpc form factor that isn’t immediately threadripper with 8 memory channels and $2000 boards
The average GPU power consumption has increased. While 15 years ago users had 50-watt GPUs, today many have 200-watt GPUs.
That's ridiculous.
I'll get a 5090 with 2 slots and an AIO. Forget that air cooling nonsense.