Tuesday, July 23rd 2024

Intel Statement on 13th and 14th Gen Core Instability: Faulty Microcode Causes Excessive Voltages, Fix Out Soon

Long-term reliability issues continue to plague Intel's 13th Gen and 14th Gen Core desktop processors based on the "Raptor Lake" microarchitecture, with users complaining that their processors have become unstable with heavy processing workloads, such as games. This includes the chips that have minor levels of performance tuning or overclocking. Intel had earlier isolated many of these stability issues to faulty CPU core frequency boosting algorithms, which it addressed through updates to the processor microcode that it got motherboard- and prebuilt manufacturers to distribute as UEFI firmware updates. The company has now come out with new findings of what could be causing these issues.

In a statement Intel posted on its website on Monday (22/07), the company said that it has been investigating the processors returned to it by users under warranty claims (which it has been replacing under the terms of its warranty). It has found that faulty processor microcode has been causing the processors to operate under excessive core voltages, leading to their structural degradation over time. "We have determined that elevated operating voltage is causing instability issues in some 13th/14th Gen desktop processors. Our analysis of returned processors confirms that the elevated operating voltage is stemming from a microcode algorithm resulting in incorrect voltage requests to the processor."
Modern processor power management runs on an intricate clockwork of collaboration between software, firmware, and hardware, with the software constantly telling the hardware what levels of performance it wants, and the hardware managing its power- and thermal budgets by rapidly altering the power and clock speeds of the various components, such as CPU cores, caches, fabric, and other on-die components. A faulty collaboration between any of the three key components could break this clockwork, as has happened in this case.

Intel is releasing yet another microcode update to its 13th- and 14th Gen Core processors, which will address not just the faulty boosting algorithm issue the company unearthed in June, but also the faulty voltage management the company discovered now. This new microcode should be released some time around mid-August to partners (motherboard manufacturers and PC OEMs), who will then need to validate it on their machines, before passing it along to end-users as UEFI firmware updates.
Intel is delivering a microcode patch which addresses the root cause of exposure to elevated voltages. We are continuing validation to ensure that scenarios of instability reported to Intel regarding its Core 13th/14th Gen desktop processors are addressed. Intel is currently targeting mid-August for patch release to partners following full validation. Intel is committed to making this right with our customers, and we continue asking any customers currently experiencing instability issues on their Intel Core 13th/14th Gen desktop processors reach out to Intel Customer Support for further assistance, the company stated.
It's important to note here, that the microcode update won't fix the issues on processors already experiencing instability, but prevent it on chips that aren't. The instability is caused by irreversible physical degradation of the chip. These chips will, of course, be covered under warranty.

Meanwhile, an interesting issue has come to light, which that some of Intel's processors built on the Intel 7 node are experiencing chemical oxidation of the die as they age. Intel responded to this, stating that it had discovered the oxidation manufacturing issues in 2023, and addressed it. The company also stated that die oxidation is not related to the stability issues it is embattled with.
We can confirm that the via Oxidation manufacturing issue affected some early Intel Core 13th Gen desktop processors. However, the issue was root caused and addressed with manufacturing improvements and screens in 2023. We have also looked at it from the instability reports on Intel Core 13th Gen desktop processors and the analysis to-date has determined that only a small number of instability reports can be connected to the manufacturing issue, the company stated.
If you feel your chip might be affected, you can file for an RMA.
Sources: Intel Community, Intel (Reddit)
Add your own comment

387 Comments on Intel Statement on 13th and 14th Gen Core Instability: Faulty Microcode Causes Excessive Voltages, Fix Out Soon

#201
Vincero
Super Firm TofuOr in the case of ridiculous CPUs (that should never have been released), the VID table will request 1.523v and then add the microcode error and mobo....*insert melting sounds*

It looks good up to 5GHz... then that same voltage bump to get to 6+ is where that efficiency goes out the window...
Posted on Reply
#202
Chrispy_
Every Intel i9 since 10th gen has just felt like the old days of AMD's Piledriver-based FX-9590 - an inferior architecture that's overclocked to within an inch of its life at ridiculously inefficient and overheating power limits. We know Intel has been behind in IPC for years now, and their solution is to just add more voltage. This wasn't a mistake, it was Intel pushing things way too far and it biting them in the ass - they gambled and lost.

I think if you've bought a "253W" Intel CPU in the last half-decade, you've known what you're getting yourself into and hopefully you've either bought the 350W+ motherboard and ridiculous cooler needed to accommodate it, or you've gone into your BIOS and enforced your own, strict limits on how much trouble your "253W" processor can actually get itself into by locking PL1 and PL2 to reasonable values for your cooling and preferred noise levels. Sure, you're not going to get the same performance as the published benchmarks show when the CPU can actually guzzle >300W but at just 150W the 12th/13th/14th gen CPUs aren't actually bad at all; They're simply ruined by extremely inefficient overvolt/overclocks right out of the box by Intel.
Posted on Reply
#203
phanbuey
LewzkeBut how this microcode was tested? (It was tested like the famous Crowdstrike driver ...) I mean it's pretty basic task to test voltages and temperatures at the engineering phases, how the hell they not catched the faulty microcode?
Because they probably tested on an Intel Test Motherboard and didn't have these issues.
Posted on Reply
#204
Vincero
Chrispy_Every Intel i9 since 10th gen has just felt like the old days of AMD's Piledriver-based FX-9590 - an inferior architecture that's overclocked to within an inch of its life at ridiculously inefficient and overheating power limits. We know Intel has been behind in IPC for years now, and their solution is to just add more voltage. This wasn't a mistake, it was Intel pushing things way too far and it biting them in the ass - they gambled and lost.

I think if you've bought a "253W" Intel CPU in the last half-decade, you've known what you're getting yourself into and hopefully you've either bought the 350W+ motherboard and ridiculous cooler needed to accommodate it, or you've gone into your BIOS and enforced your own, strict limits on how much trouble your "253W" processor can actually get itself into by locking PL1 and PL2 to reasonable values for your cooling and preferred noise levels.
I always thought it amusing how when AMD released the 220W TDP 9590 everyone (somewhat fairly) laughed at it. It had a massive TDP and still didn't really push the performance envelope, but Intel release 253W CPUs and it's all fine and dandy... I'm guessing because it did actually top a few benchmarks so it got a reprieve... but really it should have been laughed at in the same vein.
TechPowerUp have done some power limited benchmarking which to Intel's credit does show that behind the process gap there is some good IPC capability, but as a product I'm amazed so many people have bought these K/KS SKUs...
I feel bad for those who have more normal CPUs... especially those with T series chips which are meant to be lower power... they should really be nowhere near an 'excess voltage' problem.
Posted on Reply
#205
Chrispy_
VinceroI always thought it amusing how when AMD released the 220W TDP 9590 everyone (somewhat fairly) laughed at it. It had a massive TDP and still didn't really push the performance envelope, but Intel release 253W CPUs and it's all fine and dandy... I'm guessing because it did actually top a few benchmarks so it got a reprieve... but really it should have been laughed at in the same vein.
TechPowerUp have done some power limited benchmarking which to Intel's credit does show that behind the process gap there is some good IPC capability, but as a product I'm amazed so many people have bought these K/KS SKUs...
I feel bad for those who have more normal CPUs... especially those with T series chips which are meant to be lower power... they should really be nowhere near an 'excess voltage' problem.
Exactly. I remember 125W being the sweet spot the last time it was tested at a full range of power limits.

IIRC 12th gen at 125W power limit wasn't far off the performance of an 88W Zen3 competitor at the time, and considering it was the class-leading TSMC 7FF vs Intel's shaky 10nm "7" process, that's actually a pretty decent result, IMO.

It all went wrong when Intel decided that 350W 400W+ was an acceptable power draw for a consumer CPU.

Edit - apparently I'm out of touch. The 14900KS pulls 410W from the socket. Holy ****, batman - suddenly the 7800X3D's winning performance at around 80W makes this overclocked-to-death fiasco by Intel even sillier!
Posted on Reply
#206
phanbuey
Chrispy_Edit - apparently I'm out of touch. The 14900KS pulls 410W from the socket. Holy ***balls, batman - suddenly the 7800X3D being a faster gaming chip whilst actually only pulling around 70-80W from the socket makes this whole "overclocked to death" fiasco look even more stupid than I already thought it was. DAMN Intel, you dun goofed!
Not to mention - the FPS increase from 5.5ghz to 6.2ghz is like 3FPS - it's in the low single digits. That last extra 200W does basically nothing for gaming.
Posted on Reply
#207
Assimilator
VinceroI always thought it amusing how when AMD released the 220W TDP 9590 everyone (somewhat fairly) laughed at it. It had a massive TDP and still didn't really push the performance envelope, but Intel release 253W CPUs and it's all fine and dandy... I'm guessing because it did actually top a few benchmarks so it got a reprieve... but really it should have been laughed at in the same vein.
TechPowerUp have done some power limited benchmarking which to Intel's credit does show that behind the process gap there is some good IPC capability, but as a product I'm amazed so many people have bought these K/KS SKUs...
I feel bad for those who have more normal CPUs... especially those with T series chips which are meant to be lower power... they should really be nowhere near an 'excess voltage' problem.
The most stupid thing about all of this is that, actually, the 13th and 14th gen Intel CPUs are good chips with decent power consumption. Dial them down to sane voltages so that they don't boost out the wazoo, and all of a sudden they become quite comparable to their previous-generation counterparts' power consumption.

The problem is that Intel was afraid of getting spanked by AMD on performance, so they let their marketing/sales department overrule their engineers and sold chips that were overclocked to hell and gone. And that makes them look better in benchmarks, but in the long run it causes stupid, expensive, trust-destroying shit like this to happen.

And then AMD went and did the exact same goddamn thing with Zen 4 and it pisses me off so much. Obviously Intel is at fault here because if they hadn't done it AMD wouldn't have, but it pisses me off because two wrongs don't make a right, they just compound stupidity. And the last thing AMD should be doing to succeed, is copying their competitor's most stupid of ideas.

Basically, I hate marketing/sales people, but more than that I hate the dysfunctional "management" at Intel that allowed this to happen at all. They should all be fired into the Sun.
Posted on Reply
#208
Klemc
About the watts, before the big high actual Intel powerdraws, vacuum cleaner couldn't be compared to a CPU efficiency, now it can.
Posted on Reply
#209
Chrispy_
phanbueyNot to mention - the FPS increase from 5.5ghz to 6.2ghz is like 3FPS - it's in the low single digits. That last extra 200W does basically nothing for gaming.
Yeah, this is an example from W1zzard's 12th gen power scaling article, but it's basically the same thing with the same architecture out of the same foundry:



125W is only 0.8% slower than 241W, which means that even 125W is at or already beyond the point of diminishing returns; There's basically nothing left on the table after that except excessive heat and noise but Intel decided 410W was the answer and here we are today in this embarrassing mess for Intel... :\
Posted on Reply
#210
Klemc
They totally invested in powerplants selling power juice or it's even more nonsesnse.
Posted on Reply
#211
Vincero
Chrispy_Yeah, this is an example from W1zzard's 12th gen power scaling article, but it's basically the same thing with the same architecture out of the same foundry:



125W is only 0.8% slower than 241W, which means that even 125W is at or already beyond the point of diminishing returns; There's basically nothing left on the table after that except excessive heat and noise but Intel decided 410W was the answer and here we are today in this embarrassing mess for Intel... :\
Exactly this ^^

Hence my previous comment:
VinceroTechPowerUp have done some power limited benchmarking which to Intel's credit does show that behind the process gap there is some good IPC capability, but as a product I'm amazed so many people have bought these K/KS SKUs...
If it wasn't for the E-cores being present for example, the I5-12600K would have offered little over the plain 12600 or even the 12400.... and this same irony has persisted into Raptor Lake - the 'efficiency' E cores only present on higher TDP wasteful SKUs to eek out some cinebench wins....
Posted on Reply
#212
Unregistered
Chrispy_Yeah, this is an example from W1zzard's 12th gen power scaling article, but it's basically the same thing with the same architecture out of the same foundry:



125W is only 0.8% slower than 241W, which means that even 125W is at or already beyond the point of diminishing returns; There's basically nothing left on the table after that except excessive heat and noise but Intel decided 410W was the answer and here we are today in this embarrassing mess for Intel... :\
That chart shows gaming performance at various power limits. The CPU isn't drawing that amount of power. What the chart tells you is that gaming on that cpu, on average, doesn't use much more than 125W, no matter the power budget given to the CPU.

Multi-core productivity is a different story.
Posted on Edit | Reply
#213
Vincero
AssimilatorAnd then AMD went and did the exact same goddamn thing with Zen 4 and it pisses me off so much. Obviously Intel is at fault here because if they hadn't done it AMD wouldn't have, but it pisses me off because two wrongs don't make a right, they just compound stupidity. And the last thing AMD should be doing to succeed, is copying their competitor's most stupid of ideas.

Basically, I hate marketing/sales people, but more than that I hate the dysfunctional "management" at Intel that allowed this to happen at all. They should all be fired into the Sun.
Not just Zen4... to be honest the 5800X didn't really offer a lot over the 5800 (less than 2% difference in single-threaded performance, and nearly 8% in multi-threaded) but with a 60% higher TDP... and the same was true further down the product stack.

If shopping at the low-end, people buying a Ryzen 7600X instead of a 7600 (and keeping the change for maybe a bit more RAM, bigger SSD, better GPU, or just plain old beer money) confuses me especially if they plan to upgrade....

The last few Intel generations in the latter stages of Skylake / Coffee Lake showed the K CPUs starting to offer a lot less value and diminishing returns in terms of how much you can push the envelope.... those Sandy Bridge days are looooong gone.
With Alder Lake/Raptor Lake, buying the K/KS parts really just meant buying a CPU with a higher turbo boost clock and power limit, but on a process which meant thermal limits would effectively neuter a lot of that clock speed potential. Sure, you 'can' overclock them but they are so close to the red-line that it's not as practical as it used to be.
Posted on Reply
#214
AnotherReader
Chrispy_Yeah, this is an example from W1zzard's 12th gen power scaling article, but it's basically the same thing with the same architecture out of the same foundry:



125W is only 0.8% slower than 241W, which means that even 125W is at or already beyond the point of diminishing returns; There's basically nothing left on the table after that except excessive heat and noise but Intel decided 410W was the answer and here we are today in this embarrassing mess for Intel... :\
They also wanted the multithreaded performance crown and there, the lower power limit hurts competitiveness versus AMD. Thanks to more E cores, the 14900K improves upon the 12900k at lower power limits, but would still be marginally behind its competitors at comparable power draws.

Posted on Reply
#215
Onyx Turbine
VinceroNot just Zen4... to be honest the 5800X didn't really offer a lot over the 5800 (less than 2% difference in single-threaded performance, and nearly 8% in multi-threaded) but with a 60% higher TDP... and the same was true further down the product stack.

If shopping at the low-end, people buying a Ryzen 7600X instead of a 7600 (and keeping the change for maybe a bit more RAM, bigger SSD, better GPU, or just plain old beer money) confuses me especially if they plan to upgrade....

The last few Intel generations in the latter stages of Skylake / Coffee Lake showed the K CPUs starting to offer a lot less value and diminishing returns in terms of how much you can push the envelope.... those Sandy Bridge days are looooong gone.
when talking about those am5 chipsets i saw the new pricing of the 96, 97 an so on, kind of high to my taste, bad timing intel has socket 1700 issues as platform swap into new am5 is kind of not so cheap price, swap with 7600 or x is in terms of pricing okayish.. if you dont mind the high idle power consumption which i did
Posted on Reply
#216
Vincero
Onyx Turbinewhen talking about those am5 chipsets i saw the new pricing of the 96, 97 an so on, kind of high to my taste, bad timing intel has socket 1700 issues as platform swap into new am5 is kind of not so cheap price, swap with 7600 or x is in terms of pricing okayish.. if you dont mind the high idle power consumption which i did
At this point in time I'd take the 10W higher idle than the 2-3 times higher high load power usage....
It probably isn't even that measurable at the power socket due to the increasing efficiency of PSUs as power load ramps up... even 80plus platinum PSUs are not very good under 10% of their power rating in most cases.
Posted on Reply
#217
Klemc
Intel doesn't looks like interested in x3d equivalent.
Posted on Reply
#218
Solaris17
Super Dainty Moderator
A few more notches. You can complain about Intel all you want but AMD has nothing to do with this.
Posted on Reply
#219
eidairaman1
The Exiled Airman
TomorrowNvidia Bumpgate ~2008. Permanently ruined their relationship with Apple. Nvidia blamed TSMC for it.
Detonator drivers causing gpus to go boom
Posted on Reply
#220
Lew Zealand
VinceroAt this point in time I'd take the 10W higher idle than the 2-3 times higher high load power usage....
It probably isn't even that measurable at the power socket due to the increasing efficiency of PSUs as power load ramps up... even 80plus platinum PSUs are not very good under 10% of their power rating in most cases.
I think you can "have it all" if you're interested in managing your CPU a little more than the average user. I do this with my i7-9700F and run it at 4.2 GHz (plus UV) as it's more efficient there instead of the full all-core 4.5 GHz. Same will be true of an i7-14700. It already "only" goes to 5.4 GHz and you can further tune lower on clock speed and voltage to find your preferred efficiency point. Or get the 14700K for theoretically better binning for lower voltage at the same clock speed. I'd wait until this Raptor Lake debacle is fully addressed or really wait until next gen from both corps for any improved efficiencies though.

I appreciate my i7's low idle power usage when adjusted and I appreciate my R7 5700X3D's (and 5800X3D) low gaming power usage with no adjustments. That said, the idle difference is barely 10W as you mention and games really seem to like 8C8T as much as X3D as long as CPU usage stays under about 90%.
Posted on Reply
#223
dragontamer5788
ShrekNot a Defect: Intel Blames 13th, 14th Gen CPU Crashes on Software Bug (msn.com)
Microcode is hardware, as far as I'm concerned.

Just because its software internal to the CPU doesn't change the fact that its largely unavailable to typical programmers. Its effectively part of the CPU.

-------

I've said it before: "Division" (and modulus) are both operations that are almost-always implemented as microcode rather than pure hardware. From the perspective of modern programmers, the "div" and "idiv" instructions are effectively a hardware implementation. Microcode does a lot in modern CPUs because of how hugely complex these modern processors are.
Posted on Reply
#224
aytokpatop
Very high VID Voltages may be the cause....
In my case (14700KF) i'm suffering from OS file corruption fixed via sfc /scannow.
Posted on Reply
#225
efikkan
pavleEven if it is just a re-calibrated microcode that's missing the processors have been running at an over-voltage for quite a while now, I wonder if material is still the same/good (semiconductor and connections).
Assuming Intel's assessment is correct, all affected models will have (some) shortened lifespan due to higher than normal wear, but by how much will depend not only on the CPU's load but also variations in silicon quality. This is probably why it's been taking so long to pinpoint the underlying "problem". But I assume the vast majority will not notice anything, but you wouldn't know until symptoms appear, whether your sample have 90% or 1% lifespan left (at least not without some diagnostics).
UpgrayeddThat's crazy cause I haven't had a single crash
You may have a CPU of higher silicon quality. Relax and enjoy it ;)

-----

While there are many theories in circulation, and many have their suspicions about Intel's explanation, theirs is the most logical explanation to date. But time will tell. I've too have followed the coverage from news sites, Level1techs, GamersNexsus and others, and while I think thorough third-party investigation is more than welcome (perhaps even necessary), they should make sure to have the right (engineering) expertise to assess it properly (possibly even request hardware debugging tools and data about silicon quality?).
It has been suggested that about half of affected CPUs may be fixed with firmware, but let's dismiss that one outright; if there is (for any reason) abnormal wear, no firmware will reverse that. The fixed firmware will (presumably) avoid further abnormal wear.
Also various estimates of rates of completely defective CPUs of 20%, 50% or even ~99%, which I highly doubt.
Posted on Reply
Add your own comment
Nov 18th, 2026 20:36 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts