Friday, January 17th 2025
NVIDIA GeForce RTX 5090 Performance in Cyberpunk 2077 With and Without DLSS 4 Detailed
It is no secret that NVIDIA's RTX 50-series launch was welcomed with a mixed reception. On one hand, DLSS 4 with Multi-Frame Generation has allowed for obscene jumps in performance, much to the dismay of purists who would rather do away with AI-powered wizardry. A recent YouTube video has detailed what the RTX 5090 is capable of in Cyberpunk 2077 with Path Tracing at 4K, both with and without the controversial AI features. With DLSS set to performance mode and 4x frame generation (three generated frames), the RTX 5090 managed around 280 FPS. Pretty good, especially when considering the perfectly acceptable latency of around 52 ms, albeit with occasional spikes.
Turning DLSS to quality, the frame rate drops to around 230 FPS, with latency continuing to hover around 50 ms. Interestingly, with frame generation set to 3x or even 2x, the difference in latency was borderline negligible between the two, right around 44 ms or so. However, the FPS takes a massive nosedive when frame generation is turned off entirely. With DLSS set to quality mode and FG turned off, the RTX 5090 barely managed around 70 FPS in the game. Taking things a step further, the presenter turned off DLSS as well, resulting in the RTX 5090 struggling to hit 30 FPS in the game, with latency spiking to 70 ms. Clearly, DLSS 4 and MFG allows for an incredible uplift in performance with minimal artefacting, at least in Cyberpunk 2077 unless one really looks for it.
Source:
PC Centric
Turning DLSS to quality, the frame rate drops to around 230 FPS, with latency continuing to hover around 50 ms. Interestingly, with frame generation set to 3x or even 2x, the difference in latency was borderline negligible between the two, right around 44 ms or so. However, the FPS takes a massive nosedive when frame generation is turned off entirely. With DLSS set to quality mode and FG turned off, the RTX 5090 barely managed around 70 FPS in the game. Taking things a step further, the presenter turned off DLSS as well, resulting in the RTX 5090 struggling to hit 30 FPS in the game, with latency spiking to 70 ms. Clearly, DLSS 4 and MFG allows for an incredible uplift in performance with minimal artefacting, at least in Cyberpunk 2077 unless one really looks for it.



35 Comments on NVIDIA GeForce RTX 5090 Performance in Cyberpunk 2077 With and Without DLSS 4 Detailed
:D
www.nvidia.com/en-us/geforce/technologies/dlss/
You want this page for the full path-tracing results, and scroll down past the first set of results for hybrid RT which is the standard raster engine with RT used for reflections, shadows, and GI only
www.techpowerup.com/review/cyberpunk-2077-phantom-liberty-benchmark-test-performance-analysis/6.html
4090 gets 19.5fps at 4K in full path-tracing, so "struggling to hit 30fps" for the 5090 in the same scenario is expected. I don't know what that means, exactly - perhaps 25-28fps average with the occasional moment where it hits 30fps, or maybe it means it can't even hit 30fps at all. If the 5090 is 30-40% more powerful than the 4090 in terms of raw performance, I would expect a ~26fps average to the 4090's 19.5fps.
I'll pass, if I want this slow ass shit I can buy a console.
Upscaling doesn't add latency over native rendering, unless you're comparing 4K DLSS Perf to 1080p native, then obviously the latter is faster, but looks much worse.
How many generations will it take to get from 30 to 90 FPS with path tracing?
And you can't compare system latency between games. It all depends on the rendering pipeline in each title. Some games might get 20 ms at 90 FPS, and others can get 40 ms. But if you find 28 ms to be slow, then I do not envy you. This is why I keep playing at 60 Hz with Vsync without any issues. Once you get used to the good stuff, it's hard to go back.
I'd just rather have the transistors for additional horsepower, or cut them out of the die altogether slash the price and call it a non-RT, non-AI card.