Monday, December 22nd 2025

SilverStone FLP02 Retro Tower Case Transports You Back to the i386 Era

SilverStone today introduced the FLP02, a retro-inspired ATX full-tower case. This case is both contemporary and retro. It's contemporary in that it features a modern horizontally partitioned layout; and it's retro in that it comes with fully detachable 3.5-inch and 5.25-inch drive bays. The 5.25-inch bay covers, which look like FDDs, can be pulled out to install the real deal, or an optical disc drive. We'd have loved to see a 5.25-inch to 3.5-inch external bay adapter so 3.5-inch FDDs or floptical drives could be installed.

The front panel is split into two sections, the one along the front-face has an AT-style power switch, however, this is make-believe and actuates in the same way as a doorbell switch. There's a physical lock that disconnects the power switch, a normal reset button, and a turbo button that overrides the motherboard's fan PWM signal and runs fans at full speed. There's also a 2-digit segment display that shows fan duty cycle. Above the topmost 5.25-inch bay is a door that conceals a more modern front-panel I/O, consisting of a 10 Gbps-capable USB 3.2 Gen 2 type-C, two USB 3.2 type-A, and a 4-pole headset jack.
Inside the SilverStone FLP02, you get room for graphics cards up to 38.6 cm in length with the drive cages removed, and 27.9 cm with the lower 3.5-inch drive cages in place. CPU coolers can be up to 18.2 cm in height. Expansion slots include 7 conventionally oriented and two vertical slots. Drive bays include three 5.25-inch (detachable), two 3.5-inch internal (both detachable), two additional 3.5-inch in the lower compartment, and two 2.5-inch behind the motherboard tray.
Ventilation options include two 120 mm front intakes, one 140 mm rear exhaust, and either 3x 120 mm or 2x 160 mm top exhausts. You can mount a 360 mm or 280 mm radiator along the top. The case measures 232 mm (W), x 494 mm (H), x 472 mm (D). The company didn't reveal pricing.
Add your own comment

33 Comments on SilverStone FLP02 Retro Tower Case Transports You Back to the i386 Era

#1
Chaitanya
I thought this was relased months back, or is it global launch?
Posted on Reply
#2
user556
ChaitanyaI thought this was relased months back, or is it global launch?
Yep, the Related News links above have multiple references
Posted on Reply
#3
azrael
ChaitanyaI thought this was relased months back, or is it global launch?
Thought the same. In any case, the design hasn't grown on me since I first saw it. Maybe because I experienced that actual era of hideous cases first-hand.
Posted on Reply
#4
FoulOnWhite
i'd spray it black, i know i'm a peasant
Posted on Reply
#5
Chrispy_
The thing I miss most about this era was how robust PC cases were - an adult could use one as a stepladder with confidence.

That's not happening today with the cost-saving 0.5-0.7mm steel that's become the industry standard. I've bought a lot of different Silverstone cases and they're middle-of-the-road in terms of steel quality I think. Not bad, not great, definitely not 1994 standard :D
Posted on Reply
#6
bonehead123
Chrispy_The thing I miss most about this era was how robust PC cases were - an adult could use one as a stepladder with confidence.

That's not happening today with the cost-saving 0.5-0.7mm steel that's become the industry standard. I've bought a lot of different Silverstone cases and they're middle-of-the-road in terms of steel quality I think. Not bad, not great, definitely not 1994 standard :D
As the saying goes: "they don't make 'em like they used to", which, unfortunately, is true of almost everything nowadayz :D
Posted on Reply
#7
AhmadMZ99
the 5.25 floppy covers could be useful for hot swipe 2.5/3.5 HDs
Posted on Reply
#8
Black Flag
Good, but I want a case like this to be able to support AT motherboards. To provide with the specified backplate that has a hole for at keyboards. I can't find this backplate since 2017.
Posted on Reply
#9
oobymach
Cost too much for what you get. It's a small metal box, $350.
Posted on Reply
#10
Fourstaff
Right on time, we can only afford 16MB ram these days. This case helps with the nostalgia.
Posted on Reply
#11
Sort_of_Grim
The thing that :shadedshu: & :wtf: me is the power switch, lol.
Posted on Reply
#12
kondamin
Not beige enough
the power switch needs to be bigger
the fake FDD's make it look cheap

But I'm still enamoured with the concept, I would like to see a classic desktop style heavy steel box
Posted on Reply
#13
enb141
FoulOnWhitei'd spray it black, i know i'm a peasant
Yep and no fake old devices in the front panel.
Posted on Reply
#14
londiste
That Power/Lock/Reset/Turbo thing seems to be a standard 5.25" item, is that available separately as well? :D
Posted on Reply
#15
Darmok N Jalad
I wonder if they made sure the beige plastic parts turn sickly-yellow over time. If not, then it’s just not retro.
Posted on Reply
#16
Mr. Perfect
kondaminBut I'm still enamoured with the concept, I would like to see a classic desktop style heavy steel box
That would be a cool way to get an ITX case out. Some modern ITX sandwich cases are pretty close to the old desktop style format, just stood up vertically. These retro cases are amusing, but I don't build full size ATX machines anymore.
Posted on Reply
#17
Dragokar
Now we need a CS-601 remake in blue, of course :)
Posted on Reply
#18
close
FourstaffRight on time, we can only afford 16MB ram these days. This case helps with the nostalgia.
The picture is enough for that. Cheaper too. The case looks a bit kitschy and fake, and looking at it would get old(er) fast.
Posted on Reply
#19
bad1080
ChaitanyaI thought this was relased months back, or is it global launch?
there was a desktop (horizontal) version, maybe that's what you're remembering?
Posted on Reply
#20
EsaT
oobymachCost too much for what you get. It's a small metal box, $350.
For that price they should have used full hole and separate wire grille/finger guard for rear exhaust fan instead of cheapo stamping.
Especially when that stamping is big amount toward the worser end in impedance instead of more open stamping style close to wire grille:
www.silverstonetek.com/en/tech-talk/wh_chessis

And then they added that lame compartment whose idea was born in time of 65% efficiency PSUs and which was already dead when appreaded into cases more widely and is now totally meaningless with modern high efficiency PSUs...
Except for making working with PC's insides lot harder than necessary.
Chrispy_The thing I miss most about this era was how robust PC cases were - an adult could use one as a stepladder with confidence.

That's not happening today with the cost-saving 0.5-0.7mm steel that's become the industry standard. I've bought a lot of different Silverstone cases and they're middle-of-the-road in terms of steel quality I think. Not bad, not great, definitely not 1994 standard :D
Sounds like Chieftec Maxi-tower or Coolermaster Stacker...
Though the weight!
I actually added door handle on top above Stacker's 5.25" bay stack to make carrying it easier.

But that open mesh front leaked the slightest squeek of HDDs etc out, so moved from that case to Lian Li PC-A71B...
Which weights less lined thoroughly with BeQuiet's mass damping layer+foam combination mat than Stacker's empty weight.
And forced me make comparator based "logic OR" circuit for getting HDD led of the case controlled both from mobo and 3ware RAID card headers because couldn't hear activity of 4x 640GB WD Black RAID 10 array... :p
Posted on Reply
#21
mb194dc
No window or RGB nonsense gets my vote.
Posted on Reply
#22
oobymach
EsaTFor that price they should have used full hole and separate wire grille/finger guard for rear exhaust fan instead of cheapo stamping.
Especially when that stamping is big amount toward the worser end in impedance instead of more open stamping style close to wire grille:
www.silverstonetek.com/en/tech-talk/wh_chessis

And then they added that lame compartment whose idea was born in time of 65% efficiency PSUs and which was already dead when appreaded into cases more widely and is now totally meaningless with modern high efficiency PSUs...
Except for making working with PC's insides lot harder than necessary.:p
Very informative link, I have the 2nd most efficient hexagon holes on my case :P didn't even realize that was a thing.
Posted on Reply
#23
LabRat 891
Still generally unavailable unless you want to deal with a B2B-focused company like Provantage 🤮
Twice, I tried to order an FLP02 from them, and it was nothing but a nightmare. Ended up cancelling and giving up on sourcing this case, because of their bs.
EsaTFor that price they should have used full hole and separate wire grille/finger guard for rear exhaust fan instead of cheapo stamping.
Especially when that stamping is big amount toward the worser end in impedance instead of more open stamping style close to wire grille:
www.silverstonetek.com/en/tech-talk/wh_chessis
But, how does the customer see it? :laugh:
Posted on Reply
#24
ebivan
Why three 5.25" floppy fakes? Nobody had three of those. You eiter had one 3.5" and a 5.25" or even two of one or the other kind, but not three of one kind.
I dont like the fake drives anyway.
Posted on Reply
#25
Chrispy_
FoulOnWhitei'd spray it black, i know i'm a peasant
Those of us who lived as PC enthusiasts in The Beige Era were no strangers to rattle cans!
It wasn't that beige was the worst colour ever, let's face it, beige is the default colour the walls in any building are painted so beige cases were unobtrusive. No, the biggest problem is that all the beige plastic front panels of that era yellowed with age and it didn't take very long to happen either.
Posted on Reply
Add your own comment
Nov 16th, 2026 13:39 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts