Wednesday, April 8th 2026

Arctic Announces Xtender Black Clear Glass Case

Arctic today released the Xtender Black (clear glass), a spacious ATX mid-tower case, and a new variant of the Xtender series that the company launched in August 2025. The case features a pillarless front-left corner, and clear tempered-glass panels along the front- and left side panels. Black SECC steel makes up the overall sheet metal component of the case. The case comes with or without a pre-installed vertical GPU mount, and includes five of Arctic's latest ARGB LED fans pre-installed: that's two P12 Pro (120 mm), and three P14 Pro Reverse (140 mm).

The case supports motherboards up to E-ATX dimensions, with room for graphics cards up to 48.2 cm in length. There's room for up to two 420 mm (420 mm x 140 mm) radiators—along the top panel, and along the front-right panel; the rear panel has room for two 120 mm fans, or a 240 mm radiator. The Xtender Black (clear glass) is normally priced at $159.99, but is up on Amazon at an introductory price of $119.99. Its VG (vertical GPU) variant is priced at $189.99 (introductory price of $142.99). The Accelero Vertical GPU Mount can be separately purchased at $51.99 (introductory price of $38.99).
Add your own comment

11 Comments on Arctic Announces Xtender Black Clear Glass Case

#1
Mysteoa
This might be a case you could put on a carpet and not choke the PSU or use it as a vacuum.
Posted on Reply
#2
bonehead123
Maybe I'm missing something here, but how is this case different from the other 1,673,469 other angled-glass-corner, side-fanned models already out there ?

For me, it's a big YAWN/mEH.....
Posted on Reply
#3
jesdals
I like the room for 2 420 rads - that could be a nice combo with a AIO cooled GPU
Posted on Reply
#4
Inferna
bonehead123Maybe I'm missing something here, but how is this case different from the other 1,673,469 other angled-glass-corner, side-fanned models already out there ?

For me, it's a big YAWN/mEH.....
I'm so fed up with this stupid aquarium trend.

If normal cases didn't became so rare that wouldn't be an issue.
Posted on Reply
#5
RejZoR
I don't understand why are all case makers so allergic to having top covered with angled exhausts? How is Silverstone KL07 among like 2 cases that do this? I wish Silverstone would even upgrade KL-07 and give it additional rear fan cover to further muffle the only exhaust fan that isn't covered and is arguably the loudest since it just spits noise out of the rear and reflects it off the wall.

You can still have all the aquarium glass all around but I hate open tops so damn much.
Posted on Reply
#6
N/A
jesdalsI like the room for 2 420 rads - that could be a nice combo with a AIO cooled GPU
There are radiators all the way down, if you can imagine it.
bonehead123Maybe I'm missing something here, but how is this case different from the other 1,673,469 other angled-glass-corner, side-fanned models already out there ?
There is a difference. There is no extra wide power supply compartment at the back.
Posted on Reply
#7
Ihnako
MysteoaThis might be a case you could put on a carpet and not choke the PSU or use it as a vacuum.
What? The PSU is still in the bottom compartment and will be chocked by your carpet in case it stands directly on the carpet.
And yes, it's iteration XYZ of ABC. Nothing special beside you can mount 420 rads.
Posted on Reply
#8
Inferna
IhnakoWhat? The PSU is still in the bottom compartment and will be chocked by your carpet in case it stands directly on the carpet.
There is this magic trick consisting of elevating your case just a few centimeters to not choke on anything and avoid being on the same surface as where the dust mostly accumulates.
That trick can be performed with different methods, the best would be this magic device made for it:

All you need is a flat, stable surface, you can use anything that can support the weight and is a few centimeters/inches high: books, pieces of wood, rubber, anything like that.
Anyway I'm quite sure that Mysteoa was just making a joke.
Posted on Reply
#9
PixelTech
It appears from the photo of ventilation for the PSU that it's only getting fresh air through the side vent and through potential HDDs, spinning rust? There's not a cut out on the bottom like 80% of cases?
Otherwise not a terrible case. Cool in the aspect that you can have more Arctic build. What's next? Cheap keyboards and mice? Fan controllers? RGB lighting, not on fans?
Posted on Reply
#10
MrMikey
I feel like companies are releasing the same case all the time. How about a new air cooler with more heat pipes? It's been two years since their 4 heat pipe cooler came out.
Posted on Reply
#11
Mysteoa
IhnakoWhat? The PSU is still in the bottom compartment and will be chocked by your carpet in case it stands directly on the carpet.
And yes, it's iteration XYZ of ABC. Nothing special beside you can mount 420 rads.
The bottom looks like it is blocked from below and the PSU is raised, so it actually grabs air from the side panel and not the bottom.
Posted on Reply
Add your own comment
Nov 22nd, 2026 10:15 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts