Tuesday, May 19th 2026

Arctic Announces the TP-4 Premium Performance Thermal Pad

ARCTIC presents the TP-4, a high-performance thermal pad engineered for efficient heat transfer and reliable component protection. Its optimized material composition reduces thermal resistance, enabling improved heat dissipation compared to previous generations. Optimized for Versatile Hardware Integration. Designed for a wide range of hardware, the TP-4 combines strong compressibility with high thermal conductivity. This allows it to conform to uneven surfaces while maintaining consistent performance. It is suitable for applications such as RAM, chipsets, ICs, graphics cards, laptops, and gaming consoles.
Key Technical Advantages:
  • Reduced Thermal Resistance: Improved heat transfer efficiency compared to TP-3.
  • Material Compliance: Adapts to component height variations without compromising performance.
  • Flexible Thickness Options: Available in 0.5 mm, 1.0 mm, and 1.5 mm; can be layered up to 2.0 mm.
  • Non-Conductive and Safe: Electrically insulating and non-adhesive for secure handling and installation.
  • Custom Fit: Easily cut to required dimensions for precise application.
Add your own comment

7 Comments on Arctic Announces the TP-4 Premium Performance Thermal Pad

#1
Mrgravia
Been tempted to go with something like this to repaste my old ps4 and ps3 consoles.
Posted on Reply
#2
LittleBro
Replacing thermal pads on newer GPUs is a total disaster. Some pads are 1.25mm, or 1.75 mm.
Sometimes this 0.25 mm thickness can prevent you from being able to put your GPU back together (short screws).

On M.2 SSDs it's not that bad, but it's still far from perfect.
For instance, Kingston KC3000 requires 3 pads of different thickness to be optimally in contact with heatsink.
Some softer pads are quite flexible and can compensate differences between height of controller, DRAM and flash.
Some are not (Thermal Grizzly).

Arctic should focus on inventing their own thermal putty, something with conductivity of Thermal Grizzly Advanced but with lesser price.
Posted on Reply
#3
soder
Too bad its max 1.5 mm thickness. So when you need 2.0 mm (or god forbid any of those fkin custom nonsense 1.75 / 1.6mm crappy GPU situations) you are left in the dark.
Posted on Reply
#4
csendesmark
MrgraviaBeen tempted to go with something like this to repaste my old ps4 and ps3 consoles.
After 2~3 years you should do it for gen4&5 drives, also look up what thickness is recommended for your things before ordering the wrong one.
Posted on Reply
#5
Mrgravia
csendesmarkAfter 2~3 years you should do it for gen4&5 drives, also look up what thickness is recommended for your things before ordering the wrong one.
There isn't a whole lot of info out there for what part size/thickness to use for a console repasting.
Posted on Reply
#6
csendesmark
MrgraviaThere isn't a whole lot of info out there for what part size/thickness to use for a console repasting.
Well, maybe you want the replacement done by a repairshop.
Or maybe our ai friends can tell you what exactly you need.
Posted on Reply
#7
Mrgravia
csendesmarkWell, maybe you want the replacement done by a repairshop.
Or maybe our ai friends can tell you what exactly you need.
I've been tempted to just take it to a shop, though I do have some PC thermal paste handy and all the required tools.

Sony didn't really design it with easy of repasting in mind though, a lot of very small cables and such to keep track of.
Posted on Reply
Nov 16th, 2026 04:00 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts