Friday, October 2nd 2026

Thermal Grizzly Releases TG Metal Polish and Restore Polishing Paste

Thermal Grizzly TG Metal Polish & Restore is a specially developed polishing paste optimized for removing gallium residue. Another application is cleaning copper, brass, chrome, and nickel surfaces in PC hardware and technical applications. The cleaning paste removes oxidation residue and contaminants while polishing matte or tarnished areas. The result is smoother surfaces, clean metal surfaces, and increased surface shine. At the same time, TG Metal Polish & Restore provides temporary protection against oxidation.

The formulation of TG Metal Polish & Restore combines effective polishing performance with controlled abrasiveness for sensitive metal surfaces. The paste is based on a special surfactant technology that simplifies the removal of gallium-based liquid metal. The surfactant binds gallium and prevents it from re-adhering to the surface during cleaning. This allows liquid metal residue to be removed very effectively.
The practical set includes lint-free microfiber cloths that are clamped onto a polishing pen, allowing for controlled, precise, and clean application without the need for additional accessories. The large microfiber cloths (10 x 10 cm) can be used as full-size cloths for cleaning by hand or cut to size for use with the polishing pen, depending on the application.

Alongside TG Metal Polish & Restore, Thermal Grizzly is also launching a set of 20 additional polishing cloths for frequent users who regularly clean and polish metal surfaces. The TG Polishing Cloths set will be available for purchase in the next week. The Thermal Grizzly TG Metal Polish & Restore paste is available for $22.11.
  • Specially developed polishing paste for CPU dies and heatspreaders
  • Effective polishing action while remaining gentle on materials
  • Complete set with accessories for clean and precise application
  • Lint-free microfiber cloths for sensitive hardware
Source: Thermal Grizzly
Add your own comment

9 Comments on Thermal Grizzly Releases TG Metal Polish and Restore Polishing Paste

#1
LittleBro
There might be a cheaper option:

Posted on Reply
#2
dgianstefani
TPU Proofreader
Nice to see. Previously one of the best methods, recommended by Roman himself, was to use a bit of fresh LM to clean the old LM off, it worked fairly well at a functional level, but this might be nicer aesthetically.
Posted on Reply
#3
Hecate91
LittleBroThere might be a cheaper option:

Or a metal polish like Flitz if you want to be fancy, though I guess those playing around with liquid metal probably wouldn't mind spending $22 on this stuff.
Posted on Reply
#4
freeagent
Polish is just another barrier. Those imperfections would be better filled with TIM than compound.
Posted on Reply
#5
FR3D1
Ninja Cat
I have also polished the heat spreader of a CPU before, after I had sanded it "flat". It wasn't just flat then, but so shiny you could see your reflection in it.

My old FX-8350 remembers.
:pimp:

Regards,
Fred.
Posted on Reply
#6
LittleBro
Hecate91Or a metal polish like Flitz if you want to be fancy, though I guess those playing around with liquid metal probably wouldn't mind spending $22 on this stuff.
freeagentPolish is just another barrier. Those imperfections would be better filled with TIM than compound.
Exactly. With liquid TIM, there's no point in polishing, as TIM will fill the gaps.
Posted on Reply
#7
Gucky
I use Arcticlean that is a 2 component liquid solution with citrus smell. :D
I bought the small pack back in 2017 and I still use the same pack today. That said, I use it for thermal grease and haven't used it for liquid metal.
Posted on Reply
#8
Razor512
For cleaning a wide range of metals for light surface issues, I had very good results using headlight polishing compound. While it is designed for plastic, it does remove surface issues from some thermal pastes without scuffing or damaging the surface. I also use it with a felt pad for shiny and softer metals, e.g., the shiny ring on my Blue Yeti mic had some surface oxidation that made it not shiny over the years (first generation mic in use since 2010), the headlight polishing compound restored the mirror finish on the metal ring, and I ended up taking it apart to remove the ring, then applying the clear coat to it for additional protection, which still kept the mirror finish.

Posted on Reply
#9
jdrch
I just use TG PCM in the 1st place to avoid the need for this. Turn of the PC, wait for the material to cool, the peel it off. Not fw thermal paste, liquid metal, etc. after discovering that.
Posted on Reply
Nov 16th, 2026 11:25 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts