Tuesday, March 24th 2026

Thermal Grizzly Introduces New Mycro Pro RGB CPU Water Blocks, DeltaMate MPII CPU Coolers Coming in Summer

Starting today, two new CPU water blocks from Thermal Grizzly are available: the AM5 Mycro Pro RGB and the Intel 1851 Mycro Pro RGB. The coolers consist of a nickel-plated copper base plate, a cooler plate made of tempered acrylic glass, an acrylic jet plate for flow optimization, and a cover made of anodized aluminium. The inlet and outlet ports with G1/4-inch threads are each located in the acrylic glass. A filter in the form of a fine-mesh screen is located at the inlet port. The design of the cooler is identical to that of the Mycro Direct-Die coolers.
  • Fine-mesh filter at the inlet port
  • Nickel-plated copper cold plate with ultra-high-performance microfins (0.2 mm)
  • Metal housing with RGB-illuminated viewing window and internal layout
  • Inlet and outlet ports with standard G1/4" threads
  • Compatibility lists available online
Both coolers are backward compatible: the AM5 Mycro Pro RGB can be used on AM4 motherboards, while the Intel 1851 Mycro Pro RGB is compatible with Socket LGA1700.

Integrated filter for consistently high cooling performance
The integrated filter captures particles present in the water-cooling loop. These may include production residues, for example from radiators. To prevent the microfins in the copper cooler from becoming clogged, these particles are filtered out directly at the inlet port. Contamination of the microfins can impair the flow of the coolant and thereby reduce cooling performance. This may result in higher CPU temperatures. The filter helps delay this effect and can be cleaned if necessary.

Ultra-High-Performance Cold Plate
Thermal Grizzly's Ultra-High-Performance cold plates for CPU and GPU coolers are milled with minimal and highly optimized slot and fin widths. In the case of the Mycro Pro RGB coolers, both the slot and fin width on the nickel-plated copper cold plate measure 0.2 mm. A total of 68 (AMD) or 70 (Intel) microfins are located on the base plate of the CPU cooler. This high number of thin fins provides a very large surface area on which the coolant can dissipate heat quickly and efficiently. The cooler design milled into the acrylic glass, including a jet plate, is optimized for flow and enables outstanding cooling performance in combination with the highly optimized cooling fins.

Compatibility with the High Performance Heatspreader
  • The AM5 Mycro Pro RGB is not compatible with the AM5 High Performance Heatspreader.
  • The Intel 1851 Mycro Pro RGB is compatible with the Intel High Performance Heatspreader V1 (for Socket LGA1700). The flow inlet was optimized for LGA1851 (with stock heatspreader), but it can be used with Socket LGA1700 CPUs.
DeltaMate MPII CPU Coolers for AMD and Intel in Summer
CPU water blocks in the DeltaMate design are planned for summer. The premium coolers with real glass and a solid brass base are visually based on the DeltaMate GPU water blocks. A flow-optimized structure combined with an Ultra-High-Performance copper cold plate delivers the outstanding performance typical of Thermal Grizzly, which is again slightly above the level of the Mycro Pro RGB CPU water blocks. The exclusive design, premium choice of materials, and resulting performance are reflected accordingly in the price.

Availability and Pricing
Both the AM5 Mycro Pro RGB and the Intel 1851 Mycro Pro RGB are available directly from Thermal Grizzly, priced at $169.53.
Source: Thermal Grizzly
Add your own comment

13 Comments on Thermal Grizzly Introduces New Mycro Pro RGB CPU Water Blocks, DeltaMate MPII CPU Coolers Coming in Summer

#1
Kwadratowicz
Trrrryt
I'm thorn between thinking if it looks like alien with strongly outlined ribs (blue tint), or spider (orange tint), that they cast in resin :P
Posted on Reply
#2
SemperPC09
Those look so nice. I love Thermal Grizzly's design choice of matt black and grey on some of their blocks, it just looks so clean.
Posted on Reply
#3
Ruru
Trepie
I almost choked on my coffee when I saw the pricing. Cut that in half and I'd get one.
Posted on Reply
#4
Bobaganoosh
RuruI almost choked on my coffee when I saw the pricing. Cut that in half and I'd get one.
It's actually not bad considering the competition, performance (assuming it's decent), and how much it costs to make something like that.

For reference:
Optimus AM5 is $189.
EK Quantum AM5 $159.
Watercool Heatkiller IV Pro $132.
Alphacoolhas plenty over $150, Aquacomputerhas many over $200,...you have to go to like Bykski and Barrowch to start finding really cheap ones and it's probable that their performance isn't as good, but I'd like to see some reviews before that assumption is believed. Usually they try to compete on performance with Optimus. Last time I really looked into the water-block performance comparisons, it was Optimus, then Watercool and EK were close (but EK was much more expensive), and then everybody else, but Thermal Grizzly came in with their direct-die and tried to compete with Optimus...so I would expect that was their target again, but being ~$20 cheaper tells me they're probably just behind them. That is a complete guess though.

Edit: Maybe it's clear, but maybe it's not. When I compare performance on these, I'm coming from a background of mostly overclocking Intel chips drawings over 300W of power at peak so I care about "slightly better". I think most people, especially on AM5, wouldn't see a huge difference between many brands and probably only care about the aesthetics.
Posted on Reply
#5
Acijn Rhark
BobaganooshAquacomputerhas many over $200,
Only the silver versions cost more than $200 and and the Kryos Next is still the top performer 10 years after its release.

www.performance-pcs.com/products/aquacomputer-cuplex-kryos-next-am4-3000-acetal-nickel

www.performance-pcs.com/products/aquacomputer-cuplex-kryos-next-am4-3000-nickel-nickel

www.performance-pcs.com/products/aquacomputer-cuplex-kryos-next-vario-am4-3000-nickel-nickel

www.performance-pcs.com/products/aquacomputer-cuplex-kryos-next-1700-nickel-nickel




Posted on Reply
#6
maxfly
Alphacools Eisblock XPX line crushes everything price to performance at only $50-$100. But their generally pretty plain looking. The expensive blocks sell mostly on looks, then performance (EK is dead). When you're talking a difference of a couple of degrees between the top performers, just get what you think looks best, that also has a solid history of offering quality upgraded socket mounts. Otherwise rather than just getting a new GPU block every upgrade cycle your getting banged with a new CPU AND GPU block.
Posted on Reply
#7
N/A
It's probably worth it, but I'll choose a direct die to get the most out of it. And only after Intel introduces >2000 pins on the mainstream socket.
Posted on Reply
#8
Bagerklestyne
Acijn RharkOnly the silver versions cost more than $200 and and the Kryos Next is still the top performer 10 years after its release.
What are you basing that on ?
Posted on Reply
#9
Acijn Rhark
BagerklestyneWhat are you basing that on ?
- Available for 10 years and still offering the best socket support:

shop.aquacomputer.de/Water-Cooling/Spare-Parts-and-Accessories/CPU-Coolers/cuplex-kryos-NEXT:::7_2334_47_3474.html

shop.aquacomputer.de/advanced_search_result.php?keywords=reinforce

- Prices start at $62.95:

www.performance-pcs.com/products/aquacomputer-cuplex-kryos-next-am4-3000-acetal-copper

- A masterpiece of engineering: Even after 10 years on the market, it still offers the best combination of low pressure drop aka high flow rate and cooling capacity. Here’s to the next 10 years:



Posted on Reply
#10
Bagerklestyne
Acijn Rhark- Available for 10 years and still offering the best socket support:

shop.aquacomputer.de/Water-Cooling/Spare-Parts-and-Accessories/CPU-Coolers/cuplex-kryos-NEXT:::7_2334_47_3474.html

shop.aquacomputer.de/advanced_search_result.php?keywords=reinforce

- Prices start at $62.95:

www.performance-pcs.com/products/aquacomputer-cuplex-kryos-next-am4-3000-acetal-copper

- A masterpiece of engineering: Even after 10 years on the market, it still offers the best combination of low pressure drop aka high flow rate and cooling capacity. Here’s to the next 10 years:



Except you've quoted no thermal information for current gen cpu's, the linked images for thermal information are from AM4 3000 series cpus and a 13900K. None of which list thermal grizzly direct die waterblocks on them.

Show me some current thermal information which includes current gen and both direct die solution (Cuplex's and Thermal Grizzly's)
Posted on Reply
#11
Acijn Rhark
BagerklestyneNone of which list thermal grizzly direct die waterblocks
Apples are apples, and bananas are bananas.
Posted on Reply
#12
Bagerklestyne
Acijn RharkApples are apples, and bananas are bananas.
So what you're saying is you have absolutely nothing to backup the claim about your direct die brand being the best on the market still.

Helpful.
Posted on Reply
#13
Acijn Rhark
BagerklestyneSo what you're saying is you have absolutely nothing to backup the claim about your direct die brand being the best on the market still.

Helpful.
The Techpowerup article isn't about direct die coolers, and I didn't mention any direct die coolers either. That's entirely your own topic.

As I said: Apples are apples, and bananas are bananas.
Posted on Reply
Add your own comment
Nov 17th, 2026 13:15 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts