• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

How To: Enable SLI on pre-i7/i5 hardware

oh yea i also read that the ng sli patch work for the 7 seres cards so i really need some help as to which way to go as for these 7950gx2*2 r a b%$# to get to load took me 20h to figure out how to load with out bsod
 
chuckykilo said:
Now the main question do i use the hyper sli patch, r do i use the slipatch 1.5 beta and then intall the moded drivers ?
Click to expand...

HyperSLI.
 
I'm using "Asus P5Q Deluxe", P45

Anyone have it too? I need to know if i can use SLI with latest drivers.
 
Hacko said:
I'm using "Asus P5Q Deluxe", P45

Anyone have it too? I need to know if i can use SLI with latest drivers.
Click to expand...

Search earlier posts in this thread. I ran SLI Patch on my P5Q Deluxe successfully, as well as with HyperSLI (in the other thread).
 
Yeah I have a P5Q-E and the patch works for me as well. Also I'm running the newest Nvidia Patch and I have no problems when running SLI mode.
 
To Zuniggy:
I used the following about a year ago on windows 7:
- Nvidia driver version 190.62 (Not above)
- SLIPatch 0.7 (Newer should work)
* Make sure that you have a working SLI Bridge that connects the two screen cards.
* When you boot up your computer, select the SLI Enabled profile and then make sure it is enabled in the NVidia control panel.
Best of luck!
 
help me please ..

i have an intel dp45sg with 2x 460 se and CANNOT get either slipatch or hypersli to work. hypersli said it was working but there was no choice for sli in nvidia control panel. so i tried to give sli patch another go and ive tried many older drivers with no success. now when i run hypersli it says cannot read bios. Also i tried to just use older drivers and slipatch but i cannot get past the point in instructions on how to install modified drivers. i dont understand where/how to install them. PLEASE HELP =(
 
dp45sg

Hi bgad.
Yes, sli can be a problem to get to work on this system. :banghead:
According to my knowledge the new slipatch should work with any nvidia driver version but cannot say for sure because I only used an older version. You say that you cannot get past installing the older versions. If I understand correctly it should just ne as easy as uninstalling the nvidia drivers from the control panel using the "Uninstall a program" option in windows 7, rebooting and then installing the older driver by running the setup. As for hypersli, I cannot comment as I only tried normal sli.
Do you get the pre-boot menu for windows to select the Sli Enabled profile?

Best of luck,
 
Last edited:
yes the confusion i have is when it says to install modified drivers .. i downloaded them but where do you cut/paste to ..and then what ? run some .bat or .exe to install modified drivers? as to your question i can get slipatch to install and choose sli at boot but its not available in nvidia control panel but i havent installed the modified drivers
 
Hi All!!Merry Christmas to All!!
i need some help please.
no sli option.only the boot seems to modified.
steps i follow:

1)install 285.38 drivers(clean install)
2)apply sli patch 1.5 beta.
3)install 285.38 modded drivers
4)start cry..

all steps with restart between expt step 4

what's the wrong with me?as i see many ppl do it fine!damn

my system:

asus p5q3 deluxe

2x gtx295

q9550

8gb ram ddr3 1333 dc

win 7 64x

Thanks
 
GIGABYTE GA-MA790GP-UD4H & Palit NE/9600T+0152 SLI!

Was reading through the forum and became interested in this subject. Had two Palit NE/9600T+0152 (9600GT 512MB) setting around from a trade. My motherboard is a GIGABYTE GA-MA790GP-UD4H (crossfire). Do not think it is on the list of mobos that are known to be compatible with SLIPatch_v1.5_beta, but was bored and though I would give it a shot.

For everyone's information: It Works Great!! Installed without a hitch using the 275.33 driver package (do drivers first). With my Athlon II X2 245 Regor 2.9GHz (running at 3.61GHz), a single 2G stick 800 DDR2 ram (at 996) and Windows 7 Ultimate 64 bit it consistently scores just over 14000 in 3dMark06. A single card scores at about 10800. I have not tried any other tweaking so far. The GPU's are running stock 650MHz/900MHz(x2). I wont keep this configuration, but had to see if it could be done.

I often browse Tech Power Up Forums for information. Thought it was about time to pass some along myself. This is my first post, hope it is not botched too much. Thanks All
 
Mr Frucka said:
Was reading through the forum and became interested in this subject. Had two Palit NE/9600T+0152 (9600GT 512MB) setting around from a trade. My motherboard is a GIGABYTE GA-MA790GP-UD4H (crossfire). Do not think it is on the list of mobos that are known to be compatible with SLIPatch_v1.5_beta, but was bored and though I would give it a shot.

For everyone's information: It Works Great!! Installed without a hitch using the 275.33 driver package (do drivers first). With my Athlon II X2 245 Regor 2.9GHz (running at 3.61GHz), a single 2G stick 800 DDR2 ram (at 996) and Windows 7 Ultimate 64 bit it consistently scores just over 14000 in 3dMark06. A single card scores at about 10800. I have not tried any other tweaking so far. The GPU's are running stock 650MHz/900MHz(x2). I wont keep this configuration, but had to see if it could be done.

I often browse Tech Power Up Forums for information. Thought it was about time to pass some along myself. This is my first post, hope it is not botched too much. Thanks All
Click to expand...
Dude this thread has been inactive for too long, we all moved to this thread;
http://www.techpowerup.com/forums/showthread.php?t=153046

Now the patch is called "HyperSLI" and is in a more advanced stage
Have a nice day
 
Thanks for the heads-up dude. I will get around to trying HyperSLI as well and maybe post about how that goes.
 
intel x38 -> no pci e 2.0

Hi

ich have a abit quad gt intel x38 chipset , which has only one pci e 2.0 slot. on win 7 i had the problem that it was only running on pci e 1.1 but the sli patch 0.7 worked for me and it was running on pcie 2.0 with every nvidia driver. now i updatet my system to windows 8 and i have the same problem again. sli patch 1,5b isnt working on win8 and hypersli is only working for two pcie slots. does anybody got a solution? besides the links so the old version of the sli hack 0.7 on xdevs.com are down can anyboday send it to me or re up it ? thank you
 
Hi all,

Here is my problem:
So I installed my two GTX 260, SLI bridge, drivers 301.42 (latest compatible if I understood correctly?) Windows UAC disabled, Virtualization Technology enabled in BIOS, install and boot HyperSLI 0.96 on Windows 7 x64 HyperSLI. I finally enabled the SLI via the menu:
http://imageshack.us/a/img831/8913/capture2fd.png
Nothing complicated yet.

I decided to see what happens in the concrete I run 3 games (need for speed most wanted 2012, Dirt 3 and Test Drive Unlimited 2) and surprise, no change in performance ! in 1 of the 3 games you can even see flickering with SLI vertical gauge on the left.

I tested:

- Create a profile with default setting for each game, without success.
- The option to SLI rendering "Force rendering images altertative 1" the 3 games flickers/sparkles and no frameate change.
- The option to SLI rendering "One GPU", no change framerate and screen still flickers.
- A benchmark on MSI Kombustor 2.4, without the GPU profile 0 is loaded to 99%, between 0 and 1 GPU%! profile with the GPU 0 is loaded to 99%, between 15 and GPU 20%:
http://imageshack.us/a/img231/2922/capturegzi.png
- On Furmark 1.10 without profile, GPU 0 load is 99%, GPU 1 is 0% and GPU score is 665. With profile and rendering SLI option "Force rendering images altertative 1" GPU 0 load is 99%, GPU 1 is 93% and GPU score is still 665 !
- Test drivers 301.42 + HyperSLI 0.96
- Test drivers 306.96 + HyperSLI 0.96
- Test drivers 301.42 + HyperSLI 0.9

I do not understand, thank you for your help.

information :
Hyper SLI control panel tells me Hypervisior Properly enabled and works.
In information about graphics cards GPU 1 only works for Current Active 3D Application: http://img854.imageshack.us/img854/1608/capturepc.png

Configuration :
- Windows 7 Intégrale 64 bits
- Asus Ramage Formula
- Corsair HX 520W
- Core 2 quad Q9550 @3.8Ghz
- SLI GTX 260+
- OCZ Reaper 2x2go PC 8500
- RAID 0 Samsung 320go
- RAID 1 Samsung/Seagate 2to

(Translation from French with Google translation)
 
Last edited:
Latest forceware beta 310.xx gives bsod when i enable sli from nvidia control panel. If i revert back to latest whql it works fine.
I have the latest version of hypersli 0.96.

Anatolymik any solutions?
 
Hyper sli

Anyone got a download link for hyper sli 0.96
As all links on this site are dead
Thanks
 
hyper sli

hi thanks for hpyer sli 0.9
but i need 0.96 please anyone
thanks


got it now link working again
thanks
 
i need help pls

i did try the sli hack...and it worked...it says the the sli is enabled...but sometimes my pc freezes...and sometimes dont....the problem is when it works i dont see any difference from running a single card...there is no performance boost...i did some benchs before the sli....and its the same after sli....whats the problem
i have asus p5kr
2x gtx 480's
and im using the 320.18 drivers ....any help would be great
 
hello
i have a Intel Extreme DP45SG motherboard (teoreticly has a SLI support)
and 2xGigabyte 550 Ti videocard with sli connector
with a clean windows 7 64bit i can't configure sli with original driver from Nvidia
see photo
with Hypersli vers 1.0 i have BSOD
need a litle experience advice
thank's in advance
 

Attachments

  • 1.gif
    1.gif
    216 KB · Views: 1,237
  • 2.gif
    2.gif
    15.7 KB · Views: 1,194
Hi guys, I'm using an AsRock Z77Pro4M
I succesfully used the differentsli patch with an old driver, but due to the needing of using test mode that kills most online games...
I am trying to do it in a cleaner way, I was able to inject a patched DSDT with a certification from a SLI enabled mobo (same manufacturer Asrock and same chipset Z77) on Windows 10 using clover bootloader and using aida64 I can see the certificate for sli, and it seems enabled, but the nvidia control panel is still missing the sli tab...
Maybe I need to do something else...
I took a look on this huge thread, but's not easy finding stuff.
Maybe it's hal.dll? don't know... but for what I understood it should just be modded if the certificate is different (for a different chipset)...
Hope someone can help, I would really not like to buy a new mobo just because of the stupid nvidia certification thing...

Thanks for any kind of help!
 
I dont have SLI and cant spend money to buy such hardware. Better try to choose other game profile in SLI config, probably some will work.
 
You must log in or register to reply here.
Back
Top