Mullered07's Everest Memory Benchmark Thread

[JrRacinFan]

Using an nForce board. Can't really answer that. I am ready to switch back to a P35 board. Really would love to go back to a DFI.

 

[3dsage]

First time Breaking 11K, and this is my Max FSB with 2x2GB Reaper X sticks in there.

51.1ns latency with sum D9 Ballistix thrown in there.
@JR, Im sure I wont catch your 48ns latency.

 

[p_o_s_pc]

with AMD 48ns is easy I can't get as good as you guys.(my Corsair ram died) it ran CL4 at some pretty good speeds(960 i think) at not vary high voltage(2.1v) may not be as good as the D9s but still gave me some good numbers that would hold its own against JRs respectable numbers...

nice JR and 3d

 

[JrRacinFan]

Thanks pos. Oh and found out. 900 4-4-4-12 1.9v . . . . and may go further ....

 

[Shinzok]

This is my memory bandwith , is this oké bandwith ???

 

[JrRacinFan]

See if you can tweak down the following:
tRCD:4
tRP:4
tRAS:13
tRC: 18-20
tWR: 5
tWTR: 9
tRTW:5

 

[Deleted member 74752]

Game rig

rickss69|17397mb/s|15872mb/s|19345mb/s|50.6

 

[sno.lcn]

Breaking 20k on the read shouldn't be too hard on this setup

 

[chuck216]

Here's my results with my new MB:

chuck216 | 9033 | 8959 | 9538 | 53.9

 

[p_o_s_pc]

wow same board as me but slower ram speed and your bandwidth is still better. The combo of the better mem. controller and higher speed makes a nice difference.

 

[chuck216]

wow same board as me but slower ram speed and your bandwidth is still better. The combo of the better mem. controller and higher speed makes a nice difference.

I think most of the difference is the overclock on the NB up to 2800 Mhz from 1600 Mhz stock. It really opens up memory bandwidth. Unfortunately 2800 is as fast as it goes. If I try to set 3000, it won't even post.

I might do one run with the NB at the stock 1600 to show the difference in bandwidth.

 

[chuck216]

As promised, here's a run with the NB at stock speed, that was the only change made but it lowers the memory bandwidth tremendously, especially write speed.

 

[mastrdrver]

mastrdrver|18047mb/s|14469mb/s|20168mb/s|44.6

 

[p_o_s_pc]

As promised, here's a run with the NB at stock speed, that was the only change made but it lowers the memory bandwidth tremendously, especially write speed.

http://img.techpowerup.org/091101/NB1600.jpg

when your NB is stock my mem bitchslaps yours.Nice

 

[JrRacinFan]

Just a mild OC.

 

[p_o_s_pc]

nice JR better then mine at same ram speed.

 

[DrunkenMafia]

Drunkenmafia|8928mb/s|6726mb/s|10535mb/s|49.3


This is an updated version of mine. I am now running on DDR3.

 

[p_o_s_pc]

I think i could do better if i tweaked subtimngs and pushed the speed alittle higher but i am happy with this...
EDIT:mine is almost as good as drunkenMafia's DDR3

 

[DrunkenMafia]

why does my write suck so bad?? It must have something to do with my NB freq sitting stock. How can I OC my HT link / NB freq?

 

[dcf-joe]

dcf-joe | 16741 mb/s | 14107 mb/s | 20943 mb/s | 48.9