• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Mullered07's Everest Memory Benchmark Thread

I'm sad its dead as my Mushkin sticks did very well at this benchmark once I clocked them up a little. :roll:

everest2.jpg


They will do higher these days now I've fettled some more out of them.....was one of my earlier bench sessions with these sticks.
 
acid888* sweet performance from your DDR2.

What model are the modules?


2x1gb?
 
Those are some Awesome sticks man, what kind of V's does it take to hit those speeds with those timings?
 
To quote another thread:

Mushkin 1150mhz sticks.
P1060663MUS.jpg


They will do 1297mhz 5-5-5-15 on 2.3v for benches and 1268mhz 24/7 5-5-5-12 with 2.2v. I haven't tried to go any higher with looser timings but I'm sure they would crack 1333mhz...I'm also sure I'd kill them in the process. :roll:
 
aCid888* said:
To quote another thread:

Mushkin 1150mhz sticks.
http://img.techpowerup.org/090406/P1060663MUS.jpg

They will do 1297mhz 5-5-5-15 on 2.3v for benches and 1268mhz 24/7 5-5-5-12 with 2.2v. I haven't tried to go any higher with looser timings but I'm sure they would crack 1333mhz...I'm also sure I'd kill them in the process. :roll:
Click to expand...

Those are some stout Ic's under there, those clocks are damn high for such low V's.
Good stuff, hit me up if your ever gonna put them on the market.
 
Nice sticks Acid!!!!

IN your opinion is this good for 24/7?

Capture056.jpg


Dimm volts are set at 2v.

Capture057.jpg


Think I may need to re-apply some TIM?
 
Last edited:
I just saw your SysSpecs, 8GB of ram? That surely will limit your RAM OC ability and put a lot of stress on the NB.
I'd get rid of 4GB to 'Julie', sell the 2GB in there and keep the Micro kit and push for higher clocks.....or you could move all 8GB to the other rig, sell 2GB kit and buy another 4GB 1066mhz kit from a good company like G.Skill for cheap.

Aside from the above, very nice for 24/7 clocks...always room for tigher timings though...should try 4-4-4-12 @ 2.1v,

Also, scrap the idea of water cooling and grab an HDT 1283, it'll kick your Akasa in the nuts and be a whole lot cheaper than water....strap two Scythe Kaze Jyuni 110 cfm fans to the thing and it'll see your E5200 stays very cool.



DOWNLOAD! <- Far better for Intel. :toast:

Also, is that the most FSB your board can do?? If not, try for 424x8.5 for a 1:1 FSB:RAM and see a heathly speed bump, it will still give you a core speed of 3.6GHz but would boost your memory speeds. :)
 
I have Realtemp. 355 is best stable for the chip and already attempted 10.5x355fsb, requires too much extra volts (1.48+.02v vdroop). It's not the board at all thats fsb limiting. The Akasa I got for cheap and I have a pump + 120 single rad on the way that a friend is giving me.

Already tried CL4, it's a no go.

EDIT:

Ohhh just letting you know also, the hynix sticks are installed in Julie right now. I am updating as we speak. Oh and I do take that back, dimms are at 2v. I'm not trying to discredit you.
 
Last edited:
When I have some credit here, then you may be able to discredit me...dont worry my man. :toast: :laugh:

Maybe a cheap E7xxx is in order so Julie gets the E5200 and put the E1200 to work at something else??? More power in those 7xxx chips and they usually clock higher/less volts.

And seeing as your getting the water setup almost free (aside from blocks and so on) you may as well do it..add another 120 rad later on and cool the GTS. :rockout:

Edit: Any chace of some rig pics to see that RAM/cooler in action?
 
cdawall|11919mb/s|9753mb/s|13255mb/s|37.5 (READ/WRITE/COPY/LATENCY)



Capture016397.jpg
 
aCid888* said:
When I have some credit here, then you may be able to discredit me...dont worry my man. :toast: :laugh:

Maybe a cheap E7xxx is in order so Julie gets the E5200 and put the E1200 to work at something else??? More power in those 7xxx chips and they usually clock higher/less volts.

And seeing as your getting the water setup almost free (aside from blocks and so on) you may as well do it..add another 120 rad later on and cool the GTS. :rockout:

Edit: Any chace of some rig pics to see that RAM/cooler in action?
Click to expand...

I'll post pics soon. I may be trading out the DFI+e1200 for a 5kBE+ 790GX. Once at that point in time a little down the road, 720BE or 805.

Oh and regarding the GTS, I am working it out to get a GTS full cover block ;)

@cdawall

nice numbers!!!
 
Nice numbers and good to see that 955 cd.....it makes me happy to know my DDR2 isn't doing that bad though. :)

Full cover block sounds nice to me.....and the trade for a BE sounds good too...I assume Julie isn't just your rigs name and it does belong to your partner, so I'll ask; what does she use it for?
 
aCid888* said:
I assume Julie isn't just your rigs name and it does belong to your partner, so I'll ask; what does she use it for?
Click to expand...

Actually it isn't her name :p

Light usage with some gaming like Sims2, Spore, RollerCoaster Tycoon 3, and such games like that, tons of media decoding also. Gave her the 3870 to help cope with Sims 3. Crossfired 2600 pros wouldn't have cut the mustard in her PC with Sims 3.

Oh and since this pic ....

attachment.php


.. I replaced the reapers with the microns (don't have heatspreaders) and removed the extra 120mm fan and fuzz bunnies. Think I should put the fan back in? I noticed it did help with NB temps but not too much.
 
Last edited:
That AMD will surely help then....she will enjoy the new found speed.

Light gaming on a 3870...shame on you/her! Get her playing CoD4!!!


On a side note, Sims sucks lol
 
945 sat here...waiting to get abused by my girlfriend (me) :rockout:
 
aCid888* said:
945 sat here...waiting to get abused by my girlfriend (me) :rockout:
Click to expand...

Is that the 945B.E you got off of someone on here? I cant beleive its not being abused ATM.
 
aCid888* said:
945 sat here...waiting to get abused by my girlfriend (me) :rockout:
Click to expand...

3.8ghz stable is all you will get out of it on air 4ghz (ish) on water and 4.7-5 on phase
 
Hey acid!!

I put my Reapers back in :)

Capture059.jpg


Oh and it gets even better!!! Found out my chip LOVES my 10.5 multi.....

xD

Capture060.jpg
 
Last edited:
3dsage said:
Is that the 945B.E you got off of someone on here? I cant beleive its not being abused ATM.
Click to expand...
I got a whole rig from ascstinger, it was part of that. :)

cdawall said:
3.8ghz stable is all you will get out of it on air 4ghz (ish) on water and 4.7-5 on phase
Click to expand...
It does 3.8 on water without breaking a sweat...it will be sat under a HDT1283 as I don't want to buy another cooler for it so I expect it to be sat around 3.6GHz. :)

JrRacinFan said:
Hey acid!!

I put my Reapers back in :)

http://img.techpowerup.org/090412/Capture059.jpg
Click to expand...

Looking better, Jr...keep pushing them my man!

p.s Are they 800mhz stock or 1066?
 
Heres some Dominator C5D8500's in action, these sticks are cool I have more functions to tweak in AOD than with any other stick i've owned, trying to get my latency into the 39ns area.

42.png
 
aCid888* said:
Looking better, Jr...keep pushing them my man!

p.s Are they 800mhz stock or 1066?
Click to expand...

They are the "crappy" 800 CL4 kit. IM gonna keep working on this for a few more moments
 
JrRacinFan said:
They are the "crappy" 800 CL4 kit. IM gonna keep working on this for a few more moments
Click to expand...

Do you tweak the subtimings at all? Get the Copy past 7K:)
 
Too bad the cpu is a no go past 365 ...

Hmmmm ....

I'm going to try something If i am successful will post back


EDIT:
That was a no, tried posting past 366fsb.

But as you can see from my stock settings ....
Capture061.jpg


Was a definite improvement. Well time to spend the rest of my Easter SUnday with the family. ;)
 
Last edited:
You must log in or register to reply here.
Back
Top