- Joined
- Nov 26, 2008
- Messages
- 4,251 (0.75/day)
- Location
- California
System Name | New Build - Oct. 2021 |
---|---|
Processor | Intel i7 10700k |
Motherboard | Asus TUF Gaming H570-PRO |
Cooling | Corsair H100i |
Memory | Corsair Vengence 16gb 3600 mhz |
Video Card(s) | Gigabyte RTX 3060ti 8gb |
Storage | 1Tb Samsung 970 EVO NvMe m.2 |
Display(s) | 27" LG Ultragear 144hz |
Case | Fractal Design- Meshify 2 |
Audio Device(s) | Onborad dts |
Power Supply | Corsair RX 650 W |
Mouse | Roccat Kiro |
Keyboard | Razer Tarantula |
Software | Windows 10 Home x64 |
That's right! Freeman's Box is finally going under water. This is a simple log where I can keep track of my progress in water cooling my cpu and eventually future cards/ board. All parts were purchased used from my friends here @ TPU and I would like to thank johnnyfive for the majority of the goods. My goal from this liquid build is too reach 3.8Ghz on my Phenom II X4 920
Now lets start with the hardware:
Koolance 2x140 Radiator
XSPC RX120 Radiator
BitsPower Compression fittings
Swiftech Apogee XT Block
EK DCP 4.0 Res/ MCP 4.0 Pump Combo
This is a basic idea of the radiator placement, The 2x140 Koolance will be mounted on top and the RX120 will be in a push/push config mounted in the middle front drive bays.
I will be using a tubing size of 7/16 ID, 5/8 OD and running distilled +PT Nuke. The color will be either Black, Orange, or both...I have not decided yet. However I have some extra clear tubing that I will be using for leak tests.
The before picture:
I will be stripping my rig down right now....updates will soon fellow.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Now lets start with the hardware:
Koolance 2x140 Radiator
XSPC RX120 Radiator
BitsPower Compression fittings
Swiftech Apogee XT Block
EK DCP 4.0 Res/ MCP 4.0 Pump Combo
This is a basic idea of the radiator placement, The 2x140 Koolance will be mounted on top and the RX120 will be in a push/push config mounted in the middle front drive bays.
I will be using a tubing size of 7/16 ID, 5/8 OD and running distilled +PT Nuke. The color will be either Black, Orange, or both...I have not decided yet. However I have some extra clear tubing that I will be using for leak tests.
The before picture:
I will be stripping my rig down right now....updates will soon fellow.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Last edited: