This PSU is very efficient, as we can see by the way of the ETA-B rating and 80 PLUS Platinum badge. It is also dead-silent, earning it a LAMBDA-A++ rating from Cybenetics, which is the best in its noise-certification scale. The unit's specifications even include a fully modular cable design, semi-passive mode, 50°C rating, and full set of protections.
|Features & Specs|
|Model Number||Aerocool ACP-650P7|
|Max. DC Output||650W|
|Efficiency||ETA-B, 80 Plus Platinum|
|Intel C6/C7 Power State Support||Yes|
|Operating temperature||0°C - 50°C|
|Protections||Over Voltage Protection|
Under Voltage Protection
Over Power Protection
Over Temperature Protection
Over Current Protection
Short Circuit Protection
|Cooling||140 mm LED fan (CD1425M12F, 12 V, 0.24 A, 1623 RPM, FDB)|
|Dimensions||150 mm (W) x 86 mm (H) x 160 mm (D)|
|Compliance||ATX12V v2.4, EPS 2.92|
The dimensions are normal for a 650W unit, and the provided warranty is quite long at seven years. Finally, given this product's high-end features, its MSRP is as expected.
The +12V rail can deliver up to 54 A, while the minor rails deliver up to 100 W combined, which is more than enough for a modern system. With 3 A maximum current output, the 5VSB rail is also strong enough.
|Aerocool ACP-650FP7 Power Specs|
|Total Max. Power||650W|
Cables & Connectors, Power Distribution
Following through on our demands, Aerocool equipped the ACP-650FP7 with two EPS connectors and four PCIe connectors, with all of them being available at the same time. The best part is that all PCIe connectors are on dedicated cables to make sure there are no major voltage drops, as is usually the case with cables that have two PCIe connectors each. Finally, the number of peripheral connectors is adequate for a mid-capacity PSU.
|Description||Cable Count||Connector Count (Total)||Gauge|
|ATX connector 20+4 pin (600 mm)||1||1||16-20AWG|
|4+4 pin EPS12V (700 mm)||1||1||16AWG|
|8 pin EPS12V (700 mm)||1||1||16AWG|
|6+2 pin PCIe (600 mm)||4||4||18AWG|
|SATA (610 mm+150 mm+150 mm)||2||6||18AWG|
|SATA (610 mm+150 mm) / 4 pin Molex (+150 mm+150 mm)||1||2 / 2||18AWG|
|4 pin Molex (600 mm+150 mm+150 mm+150 mm)||1||4||18AWG|
|FDD Adapter (+200 mm)||1||1||20AWG|
|GRB DC Adapter (710 mm+110 mm)||1||1||26AWG|
Since this PSU features a single +12V rail, we do not have anything to comment on when it comes to its power distribution.