Saturday, April 2nd 2011

Cooler Master Announces HAF 932 Advanced Case

The award winning HAF Series of cases brought about the aesthetics of battle-hardened military vehicles. Its cases each offered the user an unprecedented amount of access to customizing their airflow and rearranging their internal system layout. Together, these features were realized for the first time within the HAF 932 and now they will begin again in the new HAF 932 Advanced.

The HAF 932 Advanced comes equipped with the very features that made the original HAF 932 world renowned. It notably included native liquid cooling support such as the ability to install a double or triple 120 millimeter radiator, a convenient coolant refill port, and liquid cooling grommets to easily route tubing to an externally mounted radiator.
Push button locks on the 5.25 inch bays, expansion card mounting via thumbscrews or a push lock, and quick hard drive mounting via removable drive trays all contributed to an elegantly simple system build.

Frustrating cable routing and CPU heatsink installation need not apply here. Striking flared side panels and a huge CPU retention hole in the motherboard tray have removed the headache from those daunting tasks by allowing CPU heatsink installation without removing the motherboard and cables to routed at the whim of the user with little space restrictions.

By infusing these features into the updated design and, in many places improving upon them, the HAF 932 Advanced comes into its own.

The HAF 932 Advanced is reborn with a high-grade all black interior coating. It is the first case to natively support Super Speed USB 3.0 via a standardized internal motherboard connector. USB 3.0 cables need not be routed through the case to the back panel, and conveniently attaches directly to compatible motherboards. The HAF 932 Advanced is ready for a new generation motherboards supporting native USB 3.0 connections.
On the inside, HAF 932 Advanced adds a newly designed graphics cards ducting. When combined with an optional 120mm fan, the duct effectively cools SLI configurations. A 2.5" SSD tray adds support for the increasing popularity of solid state drives.

Cooler Master's HAF 932 Advanced improves upon a timeless classic while maintaining the same core values. The all new HAF 932 Advanced is the first of many Cooler Master chassis to be updated to the new USB 3.0 technology. The HAF 932 Advanced will be available in North and South America in April 2011.
Add your own comment

21 Comments on Cooler Master Announces HAF 932 Advanced Case

#1
jalex3
coolermaster "MUST... MILK.. OLD.. CASE!"

but I never liked the haf anyway so ohwell.
Posted on Reply
#2
Aceman.au
Updating an old awesome case. Clever marketing
Posted on Reply
#3
hanzi
It is beginning to be a habit.

Antec started the revisions and now coolermaster :wtf:

did they ran out of design ideas?:confused:
Posted on Reply
#4
stinger608
Dedicated TPU Cruncher & Folder
I am not sure how they can call it the 932 HAF Advanced when the only difference I see from the original is the black interior and USB3 support.
Posted on Reply
#6
Static~Charge
Why the massive holes in the screen above the side fan? I could see my 4-year-old poking crayons through the holes when no one was looking. Smaller holes would work just as well and do a better job of keeping foreign objects out of the case.
Posted on Reply
#7
wolf
Better Than Native
Something about this case really appeals to me.... I love side fans and good mounting areas for radiators :)
Posted on Reply
#8
Undead46
I've never liked the side panel for the HAF 932.

So how do you solve that? Buy the HAF 942! :D
If they remodel the 942 though, I'll be mad, since I just got mine less than a month ago...

I know about the side panel replacement on Cooler Master's site, but that's dumb.. xD
Posted on Reply
#9
NC37
..'Ant'..Still no dust filters.
Aye, what the...690 has filters. Why not this CM?

I know my next case will have to have these. Got way too much dust around here.
Posted on Reply
#10
WarEagleAU
Bird of Prey
That huge cpu cut out only works if they take into account that AMD boards dont always place their sockets in the same general location on the motherboard like Intel does. I am staring at my old HAF 932 and I love it. But I have since replaced it with the Phantom White and while it is a bit better for routing, that cutout for cpu installation is still off and its a decent size.
Posted on Reply
#11
Assimilator
So instead of fixing my 2 major gripes about the original 932 (namely: no dust filters and no SATA backplanes to allow you to swap hard drives without having to remove the left panel), CM paints the interior black and adds in USB 3. WHOOP DE FREAKING DO. If you really want those features today, you can buy a HAF X. Which begs the question, what is the purpose of this "Advanced" case except to clear excess stock of the 932?
Static~ChargeWhy the massive holes in the screen above the side fan?
It ain't mesh, it's plexiglass with a weird X pattern etched into it.
Posted on Reply
#12
Wile E
Power User
I don't find the lack of filters to be an issue. I remove any that come in my cases anyway, as all they really do is impede flow. I'm no too lazy to open up a case every once in a while to dust it out.

That said, I don't like this case just because I think they are ugly as hell. They just look cheap and plasticy with all those faux reinforcement ribs and stuff.
Posted on Reply
#13
cdawall
where the hell are my stars
Wile EI don't find the lack of filters to be an issue. I remove any that come in my cases anyway, as all they really do is impede flow. I'm no too lazy to open up a case every once in a while to dust it out.

That said, I don't like this case just because I think they are ugly as hell. They just look cheap and plasticy with all those faux reinforcement ribs and stuff.
Weird I do the same thing...with filters anyway


Now I am still confused what the difference is. I got a 932 in a trade a while back and am regifting it to my bro as I think its ugly as sin but what's the difference? Usb3 and some paint? Couldn't they just fix the dumb window thing instead...
Posted on Reply
#15
bogie
FUGLY! I'd rather go for a Fractal Design XL Titanium IMO.
Posted on Reply
#16
Rowsol
Great case but at $160 it's too much I believe, at least for me.
Posted on Reply
#17
AsRock
TPU addict
I wish they would do one with a metal front i buy it then even if it was $40 for..
Posted on Reply
#19
TheMailMan78
Big Member
I have a 922 HAF and I love the damn thing. It has filters in the front FYI.
Posted on Reply
#20
Icejon
Neat case! I like the USB 3.0 internal connector. No other cases have that now, they all use the crappy USB 3.0 pass through.
Posted on Reply
#21
Edito
It's not because i own the standard 932 but damn this case it's just fantastic i always wanted to paint the interior of mine but always tough that i was incapable of doin it right now it's just a buying decision...

Good move CM...
Posted on Reply
Add your own comment
Oct 11th, 2024 10:35 CDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts