Thursday, February 19th 2026

PMM Teases Logitech G Pro X2 Superstrike Custom Mouse Mod With Near 50% Weight Reduction

PMM is a mouse mod maker that provides commercially available custom ultra-light shells for popular gaming mice, like the Razer Viper V3 Pro and the Endgame Gear OP1 8K, often shaving off upwards of 15 g from the stock weight. The latest mouse on the PMM mod radar is the Logitech G Pro X2 Superstrike, which weighs in at a hearty 60 g in stock form. The custom shell designer revealed in a post on X that an ultra-light G Pro X2 Superstrike shell is in development, asking for community feedback on a target weight and design in the process.

Throughout the thread, there are implications that the mouse modder may be able to get the mouse weight as low as 35 g, with PMM going so far as to comment that 39 g may even be possible with a solid shell with no weight-reduction holes. Replies to comments also indicate that a final weight as low as 29 g—over 50% reduction from stock—may be possible, if somewhat challenging, while 33 g would be "ambitious" while also retaining the battery. PMM also suggests that a mod kit with a different battery position could solve the forward weight bias that some users have complained about. It will likely be a while before PMM actually launches a mod kit for the Superstrike, since the design process involves 3D scanning an existing mouse and then optimizing the design from there.
Source: PMM on X
Add your own comment

21 Comments on PMM Teases Logitech G Pro X2 Superstrike Custom Mouse Mod With Near 50% Weight Reduction

#1
Unregistered
What the fraggle......I used to put weights in the mouse - not the other way around. Are people getting so weak, they can not move their arms :roll:

Posted on Edit | Reply
#2
Cpt.Jank
SawFlyWhat the fraggle......I used to put weights in the mouse - not the other way around. Are people getting so weak, they can not move their arms :roll:
You know, I'd have agreed with you until I tried a 50 g mouse. Especially working at a computer 8 hours a day, a lightweight mouse feels like a massive improvement.
Posted on Reply
#3
silapakorn
SawFlyWhat the fraggle......I used to put weights in the mouse - not the other way around. Are people getting so weak, they can not move their arms :roll:

I feel like weighted mouse is just a marketing gimmick, but in the wrong direction. My first mouse which such feature is Corsair M60 back in 2012, and after ten minutes of trying I decided to lose all the weight, as they didn't improve my usage at all.

Lighter mouse is always better for both working and gaming, but the gaming companies back then probably thought that having weight adjustability feature make their mouses look more futuristic and overall cooler. Meanwhile, lightweight was often associated with cheap material and lack of features, so they didn't think of ultralight mouse as a premium gaming product back then.
Posted on Reply
#4
Bwaze
The options to add weights to (wired) mice coincided with first boom of wireless mice - they were all quite heavy compared to older wired ones. So I think marketing of heavier weight was intentional, so it wouldn't be seen as a negative.
Posted on Reply
#5
Vayra86
Cpt.JankYou know, I'd have agreed with you until I tried a 50 g mouse. Especially working at a computer 8 hours a day, a lightweight mouse feels like a massive improvement.
Can't disagree. You also don't need a perforated shell anymore to achieve this, which is great.
silapakornI feel like weighted mouse is just a marketing gimmick, but in the wrong direction. My first mouse which such feature is Corsair M60 back in 2012, and after ten minutes of trying I decided to lose all the weight, as they didn't improve my usage at all.

Lighter mouse is always better for both working and gaming, but the gaming companies back then probably thought that having weight adjustability feature make their mouses look more futuristic and overall cooler. Meanwhile, lightweight was often associated with cheap material and lack of features, so they didn't think of ultralight mouse as a premium gaming product back then.
Light used to stand for cheap plastic while heavy was often a token of sturdy build. I think it relates closely to music gear and computer hardware; weight = content.
Posted on Reply
#6
jesdals
SawFlyWhat the fraggle......I used to put weights in the mouse - not the other way around. Are people getting so weak, they can not move their arms :roll:

Its called progress soon AI will take over every movement...
Posted on Reply
#7
Onasi
BwazeThe options to add weights to (wired) mice coincided with first boom of wireless mice - they were all quite heavy compared to older wired ones. So I think marketing of heavier weight was intentional, so it wouldn't be seen as a negative.
No, it came from the erroneous premise that a heavier mouse provides a more stable aim in games. Which is not true, as practice showed with time.
Posted on Reply
#8
Bwaze
Yes, that was the reasoning - that heavier mouse provides "smoothing" and that too light one moves erratically. I still think it was "heavily" (heh, heh) marketed by the companies so the heavy weights of wireless mice wouldn't be seen as a downside - and together with the "latencies aren't a problem, if done properly" we have arrived at today's popular $200 wireless mice that perform just as well as cheap wired ones...
Posted on Reply
#9
Sithaer
Vayra86Can't disagree. You also don't need a perforated shell anymore to achieve this, which is great.
Yeah its good to have both options.
Ever since I've tried out my first perforated light mouse I'm never going back to the other types.
Reasons being is that my palm sweats pretty easily for some reason 'I'm not even overweight..' and that can be very distracting while playing a difficult game for example or during a boss fight but with a perforated mouse this issues is almost completely gone even during the summer times.

Keeping it clean is also no more difficult for me than a full shell mouse since I'm not the type to use my peripherals with dirty cheetos hands or whatever else some ppl do and since my palm sweats less my perforated mouses collect even less dirt on them so its a win-win.
Posted on Reply
#10
Gucky
I don't need 150g mice, 60g for the Superstrike is good enough.
I also don't need any holes in my mouse...
SithaerKeeping it clean is also no more difficult for me than a full shell mouse since I'm not the type to use my peripherals with dirty cheetos hands or whatever else some ppl do and since my palm sweats less my perforated mouses collect even less dirt on them so its a win-win.
Well there is so much dust in the air here, that even after a day there is a (not visible, but feelable) dust blanket over my glass mousepad. Now imagine having a mouse with holes, how much dust it'll accumulate over time...
Posted on Reply
#11
Veseleil
I'd go other way, and say that weights in a wired mouse had its perks and utility. The main reason is to get them stay at the spot you left them at, because the cord could make it move on its own if the mouse was too light. I have a wired mouse that I've modified by removing its unremovable weight. It's a pain to keep it in place as even the small part of a cord now is heavier than the mice itself. And if the cord is stiff enough, it will go to places.

P.S. the poll needs an option that say: "I don't care, as long as it's ergonomic and comfy enough".
Posted on Reply
#12
woll3
VeseleilP.S. the poll needs an option that say: "I don't care, as long as it's ergonomic and comfy enough".
Which is definitely a factor, there are diminishing returns on lower weight and a heavier mouse(within reason ofc) where youve got a better grip on will be easier to move than something less fitting, nevermind the long term impact, there already have been a bunch of people in the aimtrainer scene crippling themselves by forcing weird grips on way too small mice.
Posted on Reply
#13
bonehead123
Well just for comparison, my MX Master 3's weigh in at a rather hefty 147G....:cry:..:respect:..:fear:

However, I don't do gamz with 'em either, just work & personal stuff....and have never found the weight a detriment nor a benefit either way, they just work for me, but then again, I have somewhat large, strong hands/wrists/arms, so there's that :D
Posted on Reply
#14
pote79
As a new user of the v1 version of the PMM Viper V3 Pro mod kit. (5% smaller mini version). Have full faith in their ability to deliver again here. Worth it or not is up to the customer.
Posted on Reply
#15
Synthwave
GuckyI don't need 150g mice, 60g for the Superstrike is good enough.
I also don't need any holes in my mouse...


Well there is so much dust in the air here, that even after a day there is a (not visible, but feelable) dust blanket over my glass mousepad. Now imagine having a mouse with holes, how much dust it'll accumulate over time...
You buy a can of compressed air, and blow into it once or twice every now and then. You can also use a soft brush too, in like every 6 months or so.

I'm seriously telling you it's not an issue.
bonehead123have somewhat large, strong hands/wrists/arms, so there's that :D
That's pretty irrevelant in this regard, but even if it wasn't, just a tiny bit (but it is), your build doesn't defy the law of physics. But good for you, I guess. :rockout:
VeseleilI'd go other way, and say that weights in a wired mouse had its perks and utility. The main reason is to get them stay at the spot you left them at, because the cord could make it move on its own if the mouse was too light. I have a wired mouse that I've modified by removing its unremovable weight. It's a pain to keep it in place as even the small part of a cord now is heavier than the mice itself. And if the cord is stiff enough, it will go to places.

P.S. the poll needs an option that say: "I don't care, as long as it's ergonomic and comfy enough".
All you need is decent motor skills. And a proper, lightweight mouse with wireless or at least a good paracord. :D
SithaerYeah its good to have both options.
Ever since I've tried out my first perforated light mouse I'm never going back to the other types.
Reasons being is that my palm sweats pretty easily for some reason 'I'm not even overweight..' and that can be very distracting while playing a difficult game for example or during a boss fight but with a perforated mouse this issues is almost completely gone even during the summer times.

Keeping it clean is also no more difficult for me than a full shell mouse since I'm not the type to use my peripherals with dirty cheetos hands or whatever else some ppl do and since my palm sweats less my perforated mouses collect even less dirt on them so its a win-win.
A good set of grip tape can do wonders.

But I agree on the cleaning part (and on the fact that you sweat less with a perforated shell).
Posted on Reply
#16
Veseleil
SynthwaveAll you need is decent motor skills. And a proper, lightweight mouse with wireless or at least a good paracord. :D
I don't need anything, as I already have those you've mentioned. I was just contemplating on one of the possible reasons why mice weights were a thing, and gave an example of a scenario where they make perfect sense.
Posted on Reply
#17
FreedomEclipse
~Technological Technocrat~
RE: The Poll

I remember when I bought my G502 X that doesnt have any internal weighting system and i thought that was almost too might coming from someone that ran multiple G502's with one weight installed till they either took a drink of tea or started double clicking

Ive gotten used to the weight of my G502 X which is something like 86g??? I'd probably be able to run with a lighter mouse but too light and build quality starts to feel extremely cheap.
Posted on Reply
#18
Synthwave
VeseleilI don't need anything, as I already have those you've mentioned. I was just contemplating on one of the possible reasons why mice weights were a thing, and gave an example of a scenario where they make perfect sense.
Yeah, some use them for stabilizing their aim/hand movement, especially in slow tac shooters, where the weight acts as a counter for the tiny inaccuracies of the hand, but even with this premise, it gets counterproductive above 85-90 grams. If I were one these people, I'd try slow skates and/or a slow control pad with a lightweight mouse first, maybe with a bit lower sensitivity even.
Posted on Reply
#19
Sithaer
SynthwaveYou buy a can of compressed air, and blow into it once or twice every now and then. You can also use a soft brush too, in like every 6 months or so.

I'm seriously telling you it's not an issue.


That's pretty irrevelant in this regard, but even if it wasn't, just a tiny bit (but it is), your build doesn't defy the law of physics. But good for you, I guess. :rockout:
Yeah I've been telling ppl the same that a perforated mouse does not necessarily mean that it will be dirty right away.
My room is often dusty cause I work in a garage so I bring up a lot of dust and whatnot here with my clothes and yet keeping my perforated mouse clean is a non issue like all it needs is blowing into it and a soft brush sometimes and its all good.
When I first took apart my first perforated mouse after years of use I was surprised of how clean the inside was like at most it had a thin layer of dust only.

Ofc ppl with a careless/bad hygiene and eating habits at the PC could turn a perforated mouse into a disaster but thats on them and in that case a full shell mouse wont look pretty either. :laugh:

Also the ageless comment about the weight and strength connection, thats still as stupid as ever.
Take me as a perfect example of how irrevelant that is, when I was a high school kid I was basically a stick with just about enough muscles to live my daily life and move around and yet I was using some stupid heavy mouses cause back then that was the 'thing' cause of the heavy=strong build quality mindset.

Nowadays when I'm in a much better shape/stronger in general after years of working out I'm using lightweight mouses so it went the exact opposite way for me.:laugh:
Posted on Reply
#20
Onasi
SithaerAlso the ageless comment about the weight and strength connection, thats still as stupid as ever.
Take me as a perfect example of how irrevelant that is, when I was a high school kid I was basically a stick with just about enough muscles to live my daily life and move around and yet I was using some stupid heavy mouses cause back then that was the 'thing' cause of the heavy=strong build quality mindset back then.
It’s especially is a pointless argument since fingertip grip exists. Wrist aiming exists. There are a lot of factors not involving strength and it’s not like anyone ever has a problem lifting a mouse, but the consensus in the aiming/FPS community for years at this point has been that there is no practical benefit to a heavier mouse. Any stability issues are either a technique flaw or are easily fixed by a more control-focused pad. It’s not like you need to go all in on a featherlight G-Wolves or anything, but any shape and size one can possibly want can be had in a sub-60 gram package and there is no reason not to.

And the arguments from people who “just work” at their PCs are irrelevant. You can do that with any mouse. Those products aren’t aimed at you. Same as with people coming to, say, a thread about a leverless fighting game controller and complaining about its pointlessness without ever touching a FG. Like… come on.
Posted on Reply
#21
Vraelon
Both switching to a 240Hz monitor and getting a sub-40g mouse had a noticible impact on my score in FPS games. As far as having holes goes I have not had a problem with the internals getting dirty and it has actually been a benefit because I can WD40 my encoder wheel without having to buy new mouse skates which typically hide the screws.
Posted on Reply
Add your own comment
Nov 18th, 2026 03:00 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts