Tuesday, August 4th 2026

OpenMouse: Open-Source Mouse Control Panel Announced With Logitech HITS Support Incoming

OpenMouse is a new hardware-agnostic, open-source, browser-based control panel for gaming mice that aims to support a host of gaming mice that would otherwise require installing software in order to change things like basic button mapping and sensor or MCU options. It works via WebHID, which means that it will work with macOS, Linux, and Windows, as long as users use a Chromium-based browser.

OpenMouse is still in the early stages of development, and it is not yet available to the public, but the development team claims to already have support for brands like WLMouse, Endgame Gear, Pulsar, Logitech, and the Orbital Pathfinder. Surprisingly, the Logitech G Pro X2 Superstrike is also on the support list, and a recent post on the OpenMouse account on X claims that Support for Logitech's HITS inductive switch and haptics tech is already on the way.
The project deliberately limits the scope of what can be controlled to so-called "safe" settings, but in the current demo UI, it shows battery levels, firmware version, and connectivity mode, and it allows for adjustment of DPI, report rate, lift-off distance, and motion sync. There are tabs for "Performance," "Buttons," and "Profiles," but the UI for those features appears to be very incomplete. Wireless configuration support and support for offline configuration—such as that offered by Wooting's Wootility—is also planned.

An early access test launch is "coming soon," and the OpenMouse development team is open to feature and device support requests on Discord. You can also follow along and contribute via the project's GitHub.

The current mouse support list includes:
  • WLMouse Beast G
  • WLMouse Beast X
  • WLMouse Huan
  • Endgame Gear OP1 8K
  • Endgame Gear OP1we
  • Pulsar X2 CrazyLight
  • Logitech Superlight 2C
  • Logitech Superlight 2
  • Orbital Pathfinder
  • Logitech Superstrike (Missing couple features)
Support for some newer Finalmouse models and the Hitscan Hyperlight are also being worked on.
Source: OpenMouse
Add your own comment

19 Comments on OpenMouse: Open-Source Mouse Control Panel Announced With Logitech HITS Support Incoming

#1
AsRock
TPU addict
Web based ermm a hard NO Thank You.
Posted on Reply
#2
Cheeseball
Not a Potato
AsRockWeb based ermm a hard NO Thank You.
What? This is better than installing proprietary software like Synapse, G Hub or iCUE.

It's literally what QMK/VIA is for keyboards.

It's also better than having to install a webapp run through a stupid Electron wrapper.
Posted on Reply
#3
TheinsanegamerN
CheeseballWhat? This is better than installing proprietary software like Synapse, G Hub or iCUE.

It's literally what QMK/VIA is for keyboards.

It's also better than having to install a webapp run through a stupid Electron wrapper.
how is it better then a webapp, exactly? Both are using a browser, at that point you may as well just webapp it.
Posted on Reply
#4
_roman_
Companes sell you a sensor in a shell, but the sensor company based in china removed the datasheet. And the usb hardware id is also not unique. just release the datasheet for the protocol and that's it.

That stuff is the wrong approach, we have usb, why do i need a webbrowser? usb has so many sub protocols and specifications, hid or somethign else does not allow such features as mouse costomisations?

i read last time some not easy obtained datasheets which may fit my mice (2x). electrical it seems always the same. The protocol is a well hidden secret. the sample windows software did nothing - i tested chinese software with hidden english on my refurbish w11 pro. The reverse engineer of another brand git hub software did nothing here although the usb id is the same. u would expect to find more when usb companies have to pay ~5000 us dollars to get registered there.
Bus 007 Device 004: ID 30fa:1701 INSTANT USB GAMING MOUSE
Bus 007 Device 005: ID 30fa:1701 INSTANT USB GAMING MOUSE

hardware buttons to change dpi, anything else is crap, or hardly works.

the motherboard brand which these mice are, did not even bother including a manual where teh dpi switch button is, where the rgb button is.
Posted on Reply
#5
Cheeseball
Not a Potato
TheinsanegamerNhow is it better then a webapp, exactly? Both are using a browser, at that point you may as well just webapp it.
Because a webapp still has to be installed onto the OS as separate software and also have its own data store folder (on Windows, you know this as the %appdata% path, which is usually where Electron stuff stores webapp data), whereas WebHID can just use an existing web browser and store site code and images in the browser's cache. It's not a big deal per se, but I would rather not have an app just be installed when configuration can be accessed from an already installed browser.
Posted on Reply
#6
RejZoR
Logitech's software is just soooooooooooooooooo bad. The way you need to attach profiles to the on-board memory is just so monumentally stupid I set something up on my mouse through 3 hour ordeal and then throw their stupid software off my system and only touch it when I replace my mouse. What's wild is that one version of Logitech software wasn't this stupid and assigning "live" presets to on-board memory was so easy. Iirc LGS was really easy to do this where G HUB is just dumb as hell. Now you need to switch between modes and flip flop with profiles, just insanely stupid. And I prefer on-board settings so I don't have to adjust all the crap again every time I reinstall system, it's all just on the mouse. At least that works fine once you stop wrestling with their software.
Posted on Reply
#7
Onasi
_roman_Companes sell you a sensor in a shell, but the sensor company based in china removed the datasheet. And the usb hardware id is also not unique. just release the datasheet for the protocol and that's it.

That stuff is the wrong approach, we have usb, why do i need a webbrowser? usb has so many sub protocols and specifications, hid or somethign else does not allow such features as mouse costomisations?
That’s… not how any of this works. PixArt, the company making sensors that are in the vast majority of mice, absolutely does have datasheets. They would not do what you imply though - it’s just an imaging CMOS. The implementation and accompanying firmware is, for the most part, unique for most manufacturers and even mice models. Add to that the MCU which also will differ on different mice and there isn’t really a one size solution unless companies themselves provide the needed packages. USB as a protocol has nothing to do with anything here.
Posted on Reply
#8
R-T-B
TheinsanegamerNhow is it better then a webapp, exactly? Both are using a browser, at that point you may as well just webapp it.
No, because one keeps it in your system browser instance, the other opens a new instance (and thus hogs more memory) for every whatever webapp instance. It's way better.

I mean yeah a native app is best but I'll take this for now given outside linux those are mostly dead.
Posted on Reply
#9
AsRock
TPU addict
CheeseballWhat? This is better than installing proprietary software like Synapse, G Hub or iCUE.

It's literally what QMK/VIA is for keyboards.

It's also better than having to install a webapp run through a stupid Electron wrapper.
You only named the bad ones. So this company when they fck your gear up going to replace it ?.

Steelseries sensei wireless mouse although software wise not as good as it was but it is set and forget and don't need to run the app more than once same with the Wooting app too.
Posted on Reply
#10
Cheeseball
Not a Potato
AsRockYou only named the bad ones. So this company when they fck your gear up going to replace it ?.

Steelseries sensei wireless mouse although software wise not as good as it was but it is set and forget and don't need to run the app more than once same with the Wooting app too.
Wooting app is also a webapp (for local installation) but you don't need to install it, just access it from wootility.io.

Steelseries GG (or whatever they call it from Engine now) is still bullshit. It has a slow launch even if you only have one device from them. Its the worse performing one compared to the others and yes even compared to NZXT's CAM.

Also I don't know how a WebHID app is going to mess up your gear when it doesn't write anything to the firmware of the mouse:



WebHID APIs just allow connection to a device's existing endpoints like how official software does.
Posted on Reply
#11
AsRock
TPU addict
CheeseballWooting app is also a webapp (for local installation) but you don't need to install it, just access it from wootility.io.

Steelseries GG (or whatever they call it from Engine now) is still bullshit. It has a slow launch even if you only have one device from them. Its the worse performing one compared to the others and yes even compared to NZXT's CAM.

Also I don't know how a WebHID app is going to mess up your gear when it doesn't write anything to the firmware of the mouse:



WebHID APIs just allow connection to a device's existing endpoints like how official software does.
Wooting have a option of either. As for SS app being slow i personally only had issue's when it went v3 i believe.

But for what else you said is good to hear but still, in the end for me use the manufactures software. Not ran the SS software for about 12 month now just no need.

If the Wooting TWO HE had more in memory profiles i be running that a lot less too, and to be honest it's a hard application to beat it just works and very well laid out.
Posted on Reply
#12
_roman_
OnasiPixArt, the company making sensors that are in the vast majority of mice
TLDR: not everything is made from one company. that is low tech

you have to pay for the usb ids, afaik 5000 us dollars to get the first 4 hex digits. i downloaded the pdf, took me quite a while to get it
vendor_ids051920_0.pdf
note, the pdff has the usb ids in human base 10 but the computer is in base 16

Good luck in finding that datasheet, took me a while (the usb idenifier company was my lead)



not everything is made from one company. i concluced it has to be that sensor without opening the hardware yet. windows software does not work, reverse engineered github code from another branded shell does not work although the usb id is hte same. + the manufacturer removed the datasheet / link // the important facts are missing from the datasheet which i wanted to have.




anyway thanks, it seems i overlooked something, "supports extra advanced customised functions in driver mode. Through the driver, a special application programmer, *Nope wont tell* can provide more controls and customised functions (such as multimedia, more CPI levels, MACRO, etc.). See the driver Application Manual for details."
OnasiUSB as a protocol has nothing to do with anything here.
what software do i need for a usb keyboard, USB HID? hmm?

roman@Wheat_Nas ~ $ zgrep HID /proc/config.gz |grep -v \#
CONFIG_BT_HIDP=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=y
CONFIG_HID_WACOM=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_I2C_HID=y
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

too lazy to serach further, bing copilot first answer states
CONFIG_USB_HID enables full USB Human Interface Device (HID) support in the Linux kernel, allowing keyboards, mice, joysticks, tablets, UPS devices, and monitor controls to function via USB.
cateee.net/lkddb/web-lkddb/USB_HID.html

It belongs in the usb stack. and as a generic interface when it not already exists.

why do i know i need usb-hid? no keboard :)

past 21 years with gnu gentoo linux, most usb mice initialise as a mouse and at the same time as a keyboard. That is the reason I prefer HID as keyboard or mouse is partly wrong.
also xev - i used it several times over the years.
Posted on Reply
#13
Inferna
Yes please, Logitech G-Hub, Steelseries GG, Corsair ICUE and every crap proprietary software for peripherals needs to die, I'd gladly replace all of them with browser based control panel.
Posted on Reply
#14
AVATARAT
A4Tech/Bloody's software has worked great for years—that's one of the reasons why I only use them.
I don't think OpenMouse can come close in terms of features.
Posted on Reply
#16
Cheeseball
Not a Potato
AsRockWooting have a option of either. As for SS app being slow i personally only had issue's when it went v3 i believe.

But for what else you said is good to hear but still, in the end for me use the manufactures software. Not ran the SS software for about 12 month now just no need.

If the Wooting TWO HE had more in memory profiles i be running that a lot less too, and to be honest it's a hard application to beat it just works and very well laid out.
Hold on dude, I believe the Wooting Two HE has four on-board profiles. Do you mean you need more? Not questioning you, but just letting you know that they are stored on-board so you really can set the four profiles and then forget it so moving it between systems works seamlessly.

I actually use a Wooting 80HE myself (aside from the K2 HE) and I can confirm it has four on-board profile slots, although I really only use one at the moment.
Posted on Reply
#17
AsRock
TPU addict
CheeseballHold on dude, I believe the Wooting Two HE has four on-board profiles. Do you mean you need more? Not questioning you, but just letting you know that they are stored on-board so you really can set the four profiles and then forget it so moving it between systems works seamlessly.

I actually use a Wooting 80HE myself (aside from the K2 HE) and I can confirm it has four on-board profile slots, although I really only use one at the moment.
Yeah, some times i make temp ones like for the game called LUTO. Just a shame it's not more than 4. used to have a few for D4 ;).

Time to time i do need more which means either keeping the software running or using their new background service.
Posted on Reply
#18
Hyderz
Personally the Logitech app is fine for the most part, because systems have gotten faster and they don’t normally try to make the app lighter, they have settings for like individual games and what not which I never used or even try using… these days I don’t even tinker with in game settings much, if the game looks good and fairly smooth and no spikes etc etc I’ll just game on…
Posted on Reply
#19
remixedcat
RejZoRLogitech's software is just soooooooooooooooooo bad. The way you need to attach profiles to the on-board memory is just so monumentally stupid I set something up on my mouse through 3 hour ordeal and then throw their stupid software off my system and only touch it when I replace my mouse. What's wild is that one version of Logitech software wasn't this stupid and assigning "live" presets to on-board memory was so easy. Iirc LGS was really easy to do this where G HUB is just dumb as hell. Now you need to switch between modes and flip flop with profiles, just insanely stupid. And I prefer on-board settings so I don't have to adjust all the crap again every time I reinstall system, it's all just on the mouse. At least that works fine once you stop wrestling with their software.
LGS is far more superior to that abomination called GHUB. Logitech needs to revert back to pre 2015 and go from there. Their current path is bonkers and all they care about is ethots and being hip when their tech is inferior and the software is slop.
Posted on Reply
Add your own comment
Nov 16th, 2026 00:43 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts