Tuesday, March 3rd 2026
NVIDIA GeForce v595.71 Drivers Reportedly Restricts Voltage on RTX 50 Series GPUs
NVIDIA released its GeForce 595.71 WHQL Game Ready Drivers yesterday to address issues with the previous 595.59 WHQL version. However, troubles don't seem to be over yet, as reports are coming from multiple users running the latest driver that the new installation is restricting GPU voltages across the RTX 50 series of "Blackwell" graphics cards. As multiple reports point out, the v595.71 driver is causing users to see a significant performance drop across multiple titles, all stemming from the capped GPU core voltage that is reducing the frequency. Wccftech testing has confirmed that the MSI GeForce RTX 5090 SUPRIM X used to run at a 1.020-1.030 V range, resulting in about 3,015-3,030 MHz in FurMark stress-testing using the older v591.86 driver with a manual overclock applied.
However, without a change in settings, the GPU now runs at a lowered voltage range between 1.005 V and 1.010 V, with occasional drops to 1.0 V. This has resulted in boost frequencies that are below 3,000 MHz, degrading the GPU performance while also lowering power usage. The reasoning behind this might be that NVIDIA is experimenting with lower voltage caps to limit what the GPU is capable of boosting to, so it can draw less power and prevent the fragile nature of the 12V-2x6 connector from overheating. Yesterday's launch of the GeForce 595.71 WHQL Game Ready Driver mentioned that the previous driver issues were resolved, which included fans not spinning or not being detected at all. However, with the new driver release, we didn't receive any information about intentional or unintentional voltage regulation happening within the driver. Hence, we are left to wait for the official company response.On the GeForce Forums, multiple accounts are also noticing a performance degradation from the latest driver release. You can check out the discussion here. Let us know in the comments if you are experiencing any issues or performance drops with the latest driver version.
Sources:
Wccftech, via VideoCardz
However, without a change in settings, the GPU now runs at a lowered voltage range between 1.005 V and 1.010 V, with occasional drops to 1.0 V. This has resulted in boost frequencies that are below 3,000 MHz, degrading the GPU performance while also lowering power usage. The reasoning behind this might be that NVIDIA is experimenting with lower voltage caps to limit what the GPU is capable of boosting to, so it can draw less power and prevent the fragile nature of the 12V-2x6 connector from overheating. Yesterday's launch of the GeForce 595.71 WHQL Game Ready Driver mentioned that the previous driver issues were resolved, which included fans not spinning or not being detected at all. However, with the new driver release, we didn't receive any information about intentional or unintentional voltage regulation happening within the driver. Hence, we are left to wait for the official company response.On the GeForce Forums, multiple accounts are also noticing a performance degradation from the latest driver release. You can check out the discussion here. Let us know in the comments if you are experiencing any issues or performance drops with the latest driver version.


50 Comments on NVIDIA GeForce v595.71 Drivers Reportedly Restricts Voltage on RTX 50 Series GPUs
I suspect the power measurement method may have changed, which in turn could have broken the boost algorithms on some card models.
I am definitely not installing this...
IMO, a 5 trillion dollar company doesn't have any excuse for being incompetent.And yet the company with 90% market share can't get drivers or a power connector right.The remaining 10% need to stop trying to be Nvidia PR.Lol no people cannot be upset enough at these vibe coded AI slop drivers, if this was any other company screwing up this badly everyone would be kicking and screaming how bad the company is.
I copy/paste every new NVIDIA driver additions and fixes into notepad. If there's no reason to upgrade the drivers, I just stick to the driver I already have installed.
I'm still on 591.74.
Many regressions were found since, even one that causes the driver build date to be reported as a placeholder value. R595 is nuclear dogshit, there's no use sugar coating it, the last time I saw a driver release this bad was the first of AMD's Adrenalin 2020 Edition drivers
Wattage rated, used, max gaming voltage
5090 FE: 600W, uses 587, 1.075V
5080 FE: 360W, uses 325, 1.015V
5070 Ti: 300W, uses 301, 1.015V (hitting power limits)
5070: 250W, uses 200-250W, 1.075V
5060 Ti: 180W, uses 150-175W, 1.045V
5060: 145W, uses 120-145W, 1.045V
5050: 130W, uses 115-130W, 1.095V
The 5080 stands out as the only GPU seemingly restricted to a lower voltage when there is power headroom to deliver more performance. The 5070 Ti hits the same max voltage but it's using max rated power so is instead power-restricted and must run at lower clocks and voltage to stay within its power limits.
@AleksandarKWith a friendly smile,
Fred.