Tuesday, March 24th 2026
SilverStone Intros FARA 314 Micro-ATX Case with Classic Layout and Legacy Storage Options
SilverStone today announced the FARA 314, a microATX tower case that offers a unique combination of a classic layout with legacy storage options, yet room for contemporary high-end graphics cards. The case features a layout resembling microATX towers from 20 years ago, with the PSU bay located above the motherboard tray. It features a modular drive-cage that includes two 5.25-inch bays, three 3.5-inch bays, and one 2.5-inch bay. In addition, there is a 2.5-inch mount along the motherboard tray, and a 3.5-inch mount along the bottom panel.
Ventilation options in the SilverStone FARA 314 include a 120 mm front intake, and a 120 mm rear exhaust. The only radiator mounting option is a 120 mm along the rear exhaust. The motherboard tray serves up room for graphics cards up to 35.4 cm in length, and CPU coolers up to 15.6 cm in height. The company recommends PSUs no longer than 14 cm to pair with this case for adequate cable mounting clearance. Front panel connectivity includes a 20 Gbps-capable USB 3.2 type-C, two USB 3.2 type-A, and a 4-pole headset jack. Measuring 181 mm x 360 mm x 410 mm (WxHxD), the case dry-weighs 4 kg, and is made mainly of SECC steel. The company didn't reveal pricing.
Ventilation options in the SilverStone FARA 314 include a 120 mm front intake, and a 120 mm rear exhaust. The only radiator mounting option is a 120 mm along the rear exhaust. The motherboard tray serves up room for graphics cards up to 35.4 cm in length, and CPU coolers up to 15.6 cm in height. The company recommends PSUs no longer than 14 cm to pair with this case for adequate cable mounting clearance. Front panel connectivity includes a 20 Gbps-capable USB 3.2 type-C, two USB 3.2 type-A, and a 4-pole headset jack. Measuring 181 mm x 360 mm x 410 mm (WxHxD), the case dry-weighs 4 kg, and is made mainly of SECC steel. The company didn't reveal pricing.





11 Comments on SilverStone Intros FARA 314 Micro-ATX Case with Classic Layout and Legacy Storage Options
I mean they used the 'legacy' word.
Or for cooking gpus with no ventilation from bottom xD
j/k, but I haven't used those for ages, and TBH, I would not ever put them in any rig that I was building nowadayz, unless a client specifically asked for them, but even then, I would seriously try to get them to reconsider...especially in a small case with limited air flow options...
but to each his own as they say.....
There are still government offices that accept cd/dvd as only means of electronic documents, so 5,25 in office is still needed.
Heck USA aviation is still on floppy disks xD or was :P
www.tomshardware.com/pc-components/storage/the-faa-seeks-to-eliminate-floppy-disk-usage-in-air-traffic-control-systems
global.icydock.com/product_64.html
global.icydock.com/product_108.html
Honestly, this has been done better way before and no one asked for 35cm GPUs in cases like this.
I love how they skipped showing connected cables because it looks like cable management will be PITA in this one.
Then there is Silverstone's FLP01 which I'm still wondering what I might place in that. It's now $149 @ Newegg.
One possible deal killer is the cut-out for rear access to the motherboard isn't big enough and can impede access to cooler mounting screws/brackets depending on the board. Both were affected when I temporarily had a B660-I in it: ibb.co/rKvL11w2
Other than that, it's a bit flimsy (thin metal) but fine if you want something small and light with 5.25" bays.