Monday, August 31st 2026
Linux Kernel Patch Expands USB4 Support for Apple Silicon SoCs
The Asahi Linux project development team has long been working on bringing Linux to Apple Silicon MacBooks and desktops, going so far as to show off games on the Arm-powered laptops. The latest patches to Asahi add proper support for USB4 and Thunderbolt on MacBooks with the M1, M2, and M3 SoCs, and that support is now making its way to the mainline Linux kernel, as per an upstream patch by prominent Asahi developer, Sven Peter.
Sources:
Linux Kernel mailing list, via Phoronix, Asahi Linux
This series adds initial USB4/Thunderbolt support for Apple Silicon M1, M2 and M3 SoCs. Each USB4 capable Type-C port comes with an ACIO ("Apple Converged I/O") block which contains a Cortex-M3 coprocessor and the hardware implementing the USB4 router.As highlighted by the developer—and the official Asahi hardware support page—USB4 enablement is still in the early phases, but there is progress being made. At the time of writing, USB4 and Thunderbolt support still lacks PCIe and DisplayPort tunneling on Apple Silicon, and there are issues with resuming from sleep with an active USB4 connection.

18 Comments on Linux Kernel Patch Expands USB4 Support for Apple Silicon SoCs
In due time.
Add tools like Fex, and you can run x86 Windows applications through Wine on Apple Silicon to really see the hardware's potential.
I actually really want to get an M1/M2 Mac at some point to give Asahi Linux a try.
You tell hackers and tinkerers that something is "impossible" and they'll do their damnedest to prove you otherwise.
they buy it for looks and not functionality. cross compiled code will run for sure faster as those standard binaries. i doubt any binary has decent optimisation when i look at those junk binaries from computerbase.de/downloads
-- you have to read between the lines, apple still does not have any proper support and they do not help or provide any datasheet, informations etc
do not buy apple product when you need core functionality. that s it, apple only hardware as windows only hardware also exists for years as a terminology. that also implies your hardware when it does not die because it is soldered on everything is rather limited in software functionality.
i use it since the linux kernel version 2.0.0 / year 1996. 21 years on gnu gentoo linux on this hardware - only this installation, several different distributions. definitely nope. nope and nope
windows, the version which the hardware was sold for, at the point of release has the best software support for amd64 compatible.
-- does it run more efficient, nope, as most use kde and gnome. that argument is also gone with SYSTEMD and kde and gnome. I see the difference with the gentoo live usb with systemd and kde quite often.
-- The laughing emoji is well deserved on apple low quality hardware, as it still does not have any hardware support. USB4 lol, that stuff is for ages in the linux kernel.
Most motherboards use only one controller, feel free to look it up when it was introduced
-- printing is also a mess with cups. config broke itself, needed rework. nope. nope nope /w11 pro never touched, only did the printer once as cups was broken, instantly printed this week after several months without flaw the amazon return label // breaking the cfg for a printer regularly does not imply any proper software support in cups. some do not see such basic stuff as they reinstall linux mint every 6 months, the typical ubuntu / mint policy over years. do not upgrade, reinstall the operating system on a version change. keep your linux runs better or has better software support hoax elsewhere
- they should since they're bringing 600gb/s mem bandwidth -but until then, apple provides HW no one else has with shitty software support.AMD Strix Halo was very promising but it was way underused and, or maybe because of, it should have provided much higher memory bandwidth for today's applications - yes, I mean AI, that's the focus nowadays, deal with it.
news.ycombinator.com/item?id=29591578
Their firmware is also easy to get and has no gotchas when loading, same applies to the bootloader, unlike what we usually see in the mobile phone industry.
The hardware itself is also pretty good, so getting your favorite system running on it is both a nice challenge as well as a bonus for one's options.TB3 was supported on Linux since 2017:
lkml.indiana.edu/hypermail/linux/kernel/1706.0/01523.html
USB4 is heavily based off TB3, and proper support for it has been added almost right away when intel donated the TB3 specs:
www.phoronix.com/news/Intel-USB-4.0-Linux-Support
TB4/USB4 (40Gbit) bas been supported since 2020:
github.com/torvalds/linux/commit/57d8df68eb53cc15e5bdfc14bfb28a18543109eb
lkml.indiana.edu/2011.2/06207.html
USB4v2 (the 80Gbit)/TB5 has been supported since 2023:
www.phoronix.com/news/Linux-6.5-USB4-v2-Barlow-RidgeWhere did you get this from? Spark should cap out at ~307GB/s when using LPDDR5X 9600MT/s over its 256-bit bus. The DGX Spark used 8533MT/s and topped at 273GB/s.