• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

X800 fuses data for unlocking

I'd appreciate if someone could help me about modding this card. Here is the atitool dialog box.
Memories are samsumg 16ns.
 
hey dolf

can i do this with the compund which is put in between the core and the heatsink? and as for the link should i just get a pin and etch a groove into the laquer going around the laseer cut and then fill it with compound? is this correct?
 
ali2487 said:
hey dolf

can i do this with the compund which is put in between the core and the heatsink? and as for the link should i just get a pin and etch a groove into the laquer going around the laseer cut and then fill it with compound? is this correct?
Click to expand...

You have to buy conductive lacquer or paint. You can't do it with silver thermal grease.
 
MSI RX800pro

hi,
is there a way to mod 16 pipes ?

samsung 2.0ns

thx 4 help
View attachment Pfauhrbios.zip

RX800pro.jpg
 
ok then dolf so once i get the laquer or paint i etch a deep groove into the substance it already has on the card around the laser cut and fill it right?
 
dolf said:
You have to buy conductive lacquer or paint. You can't do it with silver thermal grease.
Click to expand...


also dolf

do you know where the thread has gone from shadowflare about this very mod.

i have seen it before but i just didint understand it!
 
HIS X800GTO VIVO 256MB PCIe

Hi i have HIS X800GTO VIVO 256MB PCIe, it's external power connector and R480 core, on the back side of the card (right-top corner) on the card are present 8 mosfets,
p\n 102A4748810160714. can it be moded to 16 pipes? in atitool i have
0x554F:R430, Bus:1, Dev:0
0xFFFFBFFF
0xFFFFFF9E
 
g'day People my first post :) i have an HIS 800gto 12 pipes,480 core, 1.6ns ram and have tried flashing to x800xt,x850xt and failed both times.. flash worked but on reboot xp still saw it as x800gto and ati tool says i got 4 pipes ? and writing is all in japenese or something lol i can ova clock her from 400 eng to 553 - and mem from 490 to 560 (ill post screeny of test soon)

eres a screenshot of my ram fuses i dont have a screenshot of failed attempt of flashs sorry
untitled.jpg

A474_DualSlotFAN_s_250.jpg


HIS X800GTO 256MB PCIe
Chipset Radeon X800 PCIe Series
ASIC R480
Pixel Pipelines 12
Vertex Engines 6
Manu. Process(Micron) 130/110nm
Transistor 160M
Fill Rate 4800MTexel/s
Memory Size (MB) 256
Memory Type GDDR3
RAMDAC (MHz) 400 Dual
Engine CLK (MHz) 400
Memory CLK (MHz) 980
Memory Interface (bit) 256
Memory Bandwidth 31.4GB/s

also can someone tell me weather an x800gto bios with 16 pipes enabled will work? and point me in the right direction to one if it will plz :) thanks in advance :toast:

edit : or if someone could edit my bios to have 16 pipes ill try that
 

Attachments

Last edited:
beastt said:
g'day People my first post :) i have an HIS 800gto 12 pipes,480 core, 1.6ns ram and have tried flashing to x800xt,x850xt and failed both times.. flash worked but on reboot xp still saw it as x800gto and ati tool says i got 4 pipes ? and writing is all in japenese or something lol i can ova clock her from 400 eng to 553 - and mem from 490 to 560 (ill post screeny of test soon)

eres a screenshot of my ram fuses i dont have a screenshot of failed attempt of flashs sorry
untitled.jpg

A474_DualSlotFAN_s_250.jpg


HIS X800GTO 256MB PCIe
Chipset Radeon X800 PCIe Series
ASIC R480
Pixel Pipelines 12
Vertex Engines 6
Manu. Process(Micron) 130/110nm
Transistor 160M
Fill Rate 4800MTexel/s
Memory Size (MB) 256
Memory Type GDDR3
RAMDAC (MHz) 400 Dual
Engine CLK (MHz) 400
Memory CLK (MHz) 980
Memory Interface (bit) 256
Memory Bandwidth 31.4GB/s

also can someone tell me weather an x800gto bios with 16 pipes enabled will work? and point me in the right direction to one if it will plz :) thanks in advance :toast:
Click to expand...

Unfortunately NO more pipes for :mad: .
 
Last edited:
madtaz said:
Hi, Today I got the new graphic card.
This one-> http://www.komplett.no/k/ki.asp?sku=318812
And i was wondering if I could Flash this card.

(Pictures)

If you want to tell me (if I can) step by step how i flash it. It would be great!

Sry my English. :o
Click to expand...

Are those actual pictures of your ATI tool? If so, it already looks to be unlocked to 16 pipes....
 
Casheti said:
You may have 16 pipelines, but you have the R430 core, so therefore you suck.
Click to expand...

Why spam this nonsense? Lots of people have the R430 and have great luck with their cards. Sure they don't overclock well, but for the price, they are awesome.

Please don't post unhelpful information.
 
I was asking if those were his pics... If they are, there is no need to flash because his pipes are already unlocked...
 
Well who do you think the pics belong to, the queen?

Look, madtaz, you could have saved a little bit longer and got a better card. Now is not the time to be buying GTO's.

Nowadays, with AGP, you'd play games real nice on an X800XT PE. :)
 
Please just stop spamming.

madtaz
Your pipes are unlocked from the looks of the pics you posted, so there is no need to flash. R430 cores don't overclock well, but the extra pipes can make up for it. Have fun with it, and watch your temps. The extra pipes make the core run hotter than it should. I would advise replacing the stock cooler for either a zalman or an ati silencer to help keep your temps low.
 
Madtaz, answering to your question I will repeat the above post. You don't need to flash that card because it is on the max. of the pipes. Just use it as it is or buy better cooling (ATISilencer) I will recommend that because the memory is cooled too.
 
dolf said:
Madtaz, answering to your question I will repeat the above post. You don't need to flash that card because it is on the max. of the pipes. Just use it as it is or buy better cooling (ATISilencer) I will recommend that because the memory is cooled too.
Click to expand...

hey guys so does the arctic cooler cool the ram?
 
x800ve fuses

4 pipes :( cant seem to unlock - any ideas?
 

Attachments

dolf said:
Unfortunately NO more pipes for :mad: .
Click to expand...

well could someone edit my bios file to have 16 and ill try that / ? i want 16 :) if not its all good i wouldnt know were to start and how to edit a bios file and wat to look 4 ...
 

Attachments

You must log in or register to reply here.
Back
Top