Friday, August 28th 2020
ZOTAC GeForce RTX 3090 and RTX 3080 Trinity Holo Custom-Design Graphics Card Rendered
Here's the first render of a finished custom-design GeForce RTX 3090 graphics card, courtesy of a leak by HD Tecnologia. The ZOTAC GeForce RTX 3090 Trinity Holo is shown featuring a conventional axial-flow fan-heatsink design. The card is taller than standard by a good inch or so, over 2 slots thick, and appears to feature an acrylic diffuser with RGB LED elements. The RGB embellishments cover both sides of the card.
A recurring theme with "Ampere" cards appears to be thicker-than-standard backplates. On this card, the backplate looks chunky, with RGB elements all over. As for the cooling solution, it features a triple-fan setup ventilating a large heatsink, and possibly a baseplate underneath. We can see the new-generation multi-GPU connector. Variable fan-speeds for individual fans could be a new design trend with this generation. More renders of the RTX 3090 Trinity Holo surfaced, revealing three 8-pin PCIe power connectors. Renders of the RTX 3080 Holo by ZOTAC also surfaced, revealing a smaller product design with just two fans, and two 8-pin PCIe power inputs. A see-through render shows that NVIDIA is planning to use two grades of the same GA102 silicon on both the RTX 3090 and RTX 3080, differing in core-configuration, memory bus, and clock speeds.Update Aug 30th: VideoCardz scored a family shot of possibly all of ZOTAC's upcoming custom RTX 30-series board designs.
Sources:
HD Tecnologia, Hassan Mujtaba (Twitter)
A recurring theme with "Ampere" cards appears to be thicker-than-standard backplates. On this card, the backplate looks chunky, with RGB elements all over. As for the cooling solution, it features a triple-fan setup ventilating a large heatsink, and possibly a baseplate underneath. We can see the new-generation multi-GPU connector. Variable fan-speeds for individual fans could be a new design trend with this generation. More renders of the RTX 3090 Trinity Holo surfaced, revealing three 8-pin PCIe power connectors. Renders of the RTX 3080 Holo by ZOTAC also surfaced, revealing a smaller product design with just two fans, and two 8-pin PCIe power inputs. A see-through render shows that NVIDIA is planning to use two grades of the same GA102 silicon on both the RTX 3090 and RTX 3080, differing in core-configuration, memory bus, and clock speeds.Update Aug 30th: VideoCardz scored a family shot of possibly all of ZOTAC's upcoming custom RTX 30-series board designs.






62 Comments on ZOTAC GeForce RTX 3090 and RTX 3080 Trinity Holo Custom-Design Graphics Card Rendered
Samsung's 7nm is, to the best of my understanding, not big enough for GA102 either.
I'm listening to
non-Founders Edition cards, from board partners like ASUS, MSI and Gigabyte, will be powered by two 8-pin connectors
-----------------
and here i see three 8 pints connectors?
I was kinda hoping that maybe, just maybe, this time around, we would NOT have to sort through like a gazillion different sku's from every friggin mfgr and their brothers, with only very miniscule differences between each model, and therefore have to take days upon days to try to be 100% certain we are buying the model that has the exact features we want/need, but oh well, obviously this trend will continue for the foreseeable future.....
I know every mfgr wants to grab their fair share of the market, and that's fine (competition is great & helps bring prices down quickly), but surely this can be accomplished without the clusterf*ck assortment approach...
Why would someone want to buy now.
As for this Zotac card...I won't trust anything from them. I returned my oven of a 1080ti long ago that would heat up badly at idle. I'm pretty sure lots of people had the same problem. Anyhow, I'm ready to see prices and tired of all the hype, crying and bashing from biased parties. I almost don't want to read these articles until real, factual information comes available.
Toying with bios profiles this is not the answer.
In my list I got :
Logitech mouses are not made for the long run : my MX510 right button stopped functioning one day and nothing can be made, she died. Some weeks ago, my brother's MX510 died, same symptom.
MSI motherboards have to be high end or else the BIOS lacks a lot of features : I bought a MSI board with my 3570k when it launched, I didn't buy the top tier motherboard, just something in the middle, not even the budget one and I couldn't access to many OC settings. I contacted the support : If you want more OC settings, buy a premium version... I was like wow. I had my money back from the shop and bought a Gigabyte with the settings I missed on the MSI for the same price xD.
And there is Zotac...well, time goes but how to trust when bad experiences happen ? :D
I guess it's like those people hating ACER or SEAGATE because the products failed and they were mad too.
just think, 8 years ago when we have r290 i remember msi have lighting version with 3x8 pins connection, and since then nvidia and amd was trying reduce "W" and make less power hungry gpu, 2020 3x8 pin back in game :)
That's why I asked if they (Zotac) do a correct job nowadays.
This is more than 12 years old history, the only other competitor was the Microsoft optical mouse.