Thursday, June 19th 2025

AMD's Next-Gen UDNA-Based Radeon GPUs to Use 80 Gbit/s HDMI 2.2

Just as the RDNA 4 rollout cycle is completing, the rumor mill for the next generation of Radeon GPUs is intensifying. According to @Kepler_L2 on X, a reliable leaker, AMD is equipping its next-generation UDNA-based GPUs with the HDMI 2.2 display protocol, capable of supporting 64 and 80 Gbit/s, meaning that the highest-end bandwidth of 96 Gbit/s (Ultra96) is not expected to arrive until the next generation. The HDMI Forum, the consortium behind the HDMI standard, officially released the HDMI 2.2 specifications in January during CES. The HDMI forum also foresees HDMI 2.2 cables hitting the shelves sometime in Q3 or Q4 of 2025, which means the rollout is near. However, AMD's next-generation GPUs will not utilize its entire feature spectrum in the coming GFX13 GPU architecture.

The HDMI 2.2 update introduces a future-proof Fixed Rate Link architecture that delivers up to 96 Gbps of bandwidth, enabling uncompressed 4K at 240 Hz or 8K at 60 Hz with full 4:4:4 chroma, and paving the way for even higher resolutions, such as 10K and 12K at 120 Hz. It accommodates both uncompressed and visually lossless compressed formats, as well as advanced chroma sampling options. This massive data throughput meets the growing demands of immersive audiovisual experiences from next-generation gaming and augmented and virtual reality to professional light-field displays, large-format digital signage, medical imaging, and machine-vision systems by doubling payload capacity every two to three years. The Ultra96 HDMI cable is designed to handle all HDMI 2.2 features. This cable is accompanied by the new Latency Indication Protocol, which ensures precise lip-sync and audio-video alignment across complex multi-hop setups involving receivers, soundbars, and other downstream devices.
Sources: @Kepler_L2 on X, HDMI Forum
Add your own comment

53 Comments on AMD's Next-Gen UDNA-Based Radeon GPUs to Use 80 Gbit/s HDMI 2.2

#51
Tek-Check
Dr. DroYou are already aware of the Odyssey Neo G9 with a 7680x2160/240 resolution and its insatiable bandwidth demands. You are also aware that while RDNA 3 could handle it, with DSC, and Ada could not. Safe to assume that you are also aware that the situation is presently inverted and will eventually show itself again, once similarly extreme monitors with even higher specs appear on the market. At that time, the Nvidia cards will be ready for them, and the AMD ones won't. So, no, it's not nonsense, and even though a "theoretical", it's one that has presented itself very recently, after all.
Such scenario will not happen on commercial monitors meant for mid range and entry cards. It's purely academic point at this moment, aka theoretical without inverted commas. Monitors beyond 8K/165 and beyond 4K/480 are not coming to market any time soon, even not by 2030, and those resolutions and refresh rates are supported. So, there is no practical point here to be made.
Dr. DroHold up, though. So back then Nvidia could have added things like DP 2.0 on Ada boards despite the "PCB" purportedly being reused from Ampere, but now reusing RDNA 3 PCBs for RDNA 4 somehow excuses the throttled bandwidth. Wouldn't this be a double standard?
No, because once entire ecosystem moves away from DP 1.4, issues such as driving halo monitors like 57-inch Samsung 8K/2K/240Hz disappear. AMD competes in middle range and entry segments this generation, so current solution is appropriate. The difference between reusing PCB with DP 1.4 and the one with DP54 is colossal. Different magnitude of things, to the point that the then most expensive card on the planet 4090 wasn't able to drive Samsung's display. Such situation will not happen now with cards from either vendor. There is no point to be made here either.
Dr. DroIt's time to start preparing for the future and both DP2.1 and HDMI 2.2 will have a crucial role here IMHO - and the more bandwidth, the better.
Good point. I agree.
Dr. DroThat much is also obvious, so I don't even know what we are arguing about at this point :D
We are not anyone, as we have fine tuned the area of reasonable and practical consensus without being theoretically stubborn. A good outcome. Well done.
Posted on Reply
#52
Scircura
Dr. DroI've never been one to be picky regarding DSC, because it's supposed to be visually lossless. I'll cut you this one, because honestly as long as the image looks visually lossless, I couldn't care less (example: raw PCM audio vs. FLAC)
Nit: FLAC is actually lossless. DSC is not. It's perceptually lossless, which is a confusing way of saying "lossy, but not in a way that people usually notice." The level of perceptual transparency achieved by DSC (check Wikipedia and one of its references for specifics) I'd say is more comparable to the transparency from medium-high-bitrate MP3. In other words, some images are perceptually altered by DSC (you'd notice if DSC was rapidly toggled on and off), but most images aren't.
Posted on Reply
#53
Tek-Check
ScircuraIn other words, some images are perceptually altered by DSC (you'd notice if DSC was rapidly toggled on and off), but most images aren't.
This is true and it was measured in studies. Some participants can notice it more than others, so there are individual differences in perception, in the same way as there are individual differences in perception of refresh rate and motion.

Professional photographers working with large HDR image files and high colour accuracy are usually advised to avoid connections to monitors with DSC, as some photographs might contain compression artefacts. But their monitors are usually 60-100Hz so the issue is unlikely to occur in the first place as bandwidth is not a problem. Again, it's niche effect.
Posted on Reply
Add your own comment
Nov 21st, 2026 23:14 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts