Tuesday, June 24th 2025
ASUS BTF 2.5 Connector on GeForce RTX 5090 Stays Cool Even at 1,900 W Load
ASUS has confirmed that its GeForce RTX 5090 BTF Edition can draw nearly 1,900 W without any signs of overheating, thanks to a robust metal power connector that holds up under pressure. In a series of controlled stress tests led by Tony Yu, General Manager of ASUS China, the BTF v2.5 proprietary GC-HPWR connector remained well within safe temperature limits, outperforming the conventional plastic 16-pin 12VHPWR/12V-2x6 alternative. The latest Back-to-the-Future update introduces a detachable GC-HPWR adapter, giving users the flexibility to switch between ASUS's metal connector and the standard 16-pin plug. ASUS supplies a small extraction tool that makes it easy to swap connectors, overcoming the original design's limitation of a permanently attached GC-HPWR adapter and ensuring wider compatibility with existing motherboards, as well as non-BTF-supported boards.
In the first trial, the card drew approximately 670 W, roughly matching the RTX 5090's typical maximum, and the GC-HPWR connector stabilized between 30°C and 35°C over ten minutes. ASUS engineers rated the metal connector for up to 1,000 W continuous operation, and the results confirmed a comfortable safety margin for maximum load. Tony Yu even increased the draw to 1,300 W, yielding a peak connector temperature of 38°C. In a final extreme test, the load was set to 150 A, driving total consumption above 1,900 W. Even under these conditions, the metal connector held at about 41°C, while the power cables reached roughly 70°C, demonstrating the adapter's superior thermal performance. Yu's experiments also showed that the GC-HPWR and 16-pin connectors can share the power load. At a 200 A setting, each connector supplied around 1,200 W to 1,400 W from separate power lines. Although ASUS plans to ship retail RTX 5090 cards with a single connector, this test suggests a possible path for future ultra-high-power GPUs designed for extreme overclockers.
Sources:
BiliBili, Uniko's Hardware, via Tom's Hardware
In the first trial, the card drew approximately 670 W, roughly matching the RTX 5090's typical maximum, and the GC-HPWR connector stabilized between 30°C and 35°C over ten minutes. ASUS engineers rated the metal connector for up to 1,000 W continuous operation, and the results confirmed a comfortable safety margin for maximum load. Tony Yu even increased the draw to 1,300 W, yielding a peak connector temperature of 38°C. In a final extreme test, the load was set to 150 A, driving total consumption above 1,900 W. Even under these conditions, the metal connector held at about 41°C, while the power cables reached roughly 70°C, demonstrating the adapter's superior thermal performance. Yu's experiments also showed that the GC-HPWR and 16-pin connectors can share the power load. At a 200 A setting, each connector supplied around 1,200 W to 1,400 W from separate power lines. Although ASUS plans to ship retail RTX 5090 cards with a single connector, this test suggests a possible path for future ultra-high-power GPUs designed for extreme overclockers.




15 Comments on ASUS BTF 2.5 Connector on GeForce RTX 5090 Stays Cool Even at 1,900 W Load
dlcdnwebimgs.asus.com/gain/bea657b1-f671-47d7-aaed-d8ba87fad68e/
So they better show us temps on that 12V-2X6 at the back of the motherboard.
This is just shifting the real issue to another component.
I do like the idea, but i don't want it until NVIDIA and even other manufacturer's (yes, you Sapphire) get's their heads out of their asses and add proper load balancing to GPU's.
If ASUS really wants this standard to get off, make card with two of these, one on the bottom (for MB) and one on the top/back (for the PSU cable) and sell or include adapter cable for PSU. This doesn't fix the PSU side, but something like 4x8pin would be quite safe and widely compatible.
they should have used 4 traditional 8 pin pci connectors on the board instead!
To me it says the connectors we use were designed for cards from 20 years ago, and we were overdue for a replacement design.
Too hot for PC gaming and too hot for outdoor activities. YouTube on the iPad is this weeks entertainment.
Standards also change. It used to be that 900 watt was the max you could safely draw from the wall. Then it was 1400 watt, then 2000 watt. In countries that are not the US the limit is twice as high.This is subjective. Yes, 600 watt is a lot of heat. Some people are clearly willing to tolerate that heat. If you dont want that....the 4080/4070/4060ti/4060 all exist. Nobody is forcing you to buy the 600w cards, and they're not hurting you.
There's also the fact that 99% of the time a 4090/5090 dont actually hit 600w sustained usage, and some minor tweaking can bring power use down significantly.I think we should ban all GPUs over 37 watt. That was AGP's limit. You dont need any more than that. The stupidity of GPUs over the GT 1030 need to die out or else we are going to keep looking for solutions to problems that really shouldnt exist.