Wednesday, August 27th 2025
Rapidus Tapes out 2 nm GAA Test Chip, Mass Production in 2027
Japan's Rapidus has successfully taped out a 2 nm GAA test chip, with plans to enter high-volume production in 2027. During their Hot Chips 2025 talk, the company outlined its goals for the new IIM-1 foundry, where these chips will be produced, as well as its pitch to customers accustomed to other fabs, such as TSMC and potentially Intel. The Rapidus 2 nm GAA test chip was built using EUV tools from ASML, and the node has achieved all of the required electrical characteristics that were set from the start. With volume production in 2027, the Rapidus CEO notes that approximately 25,000 wafers will be produced per month at their IIM-1 fab.
However, in 2027, Rapidus will be a node or two behind TSMC, and potentially even Intel. Therefore, the company wants to differentiate itself from the competition by being the most agile in the field. The company advertises a turnaround time of only 50 days for its proprietary all-single-wafer concept, whereas the batch-single mixed design typically requires around 120 days to completion. This cuts the waiting time for custom silicon from three months to just 50 days. Rapidus envisions this by using a custom backend that works with OSAT, EDA, IP, R&D, and tool materials to enable rapid turnaround times for silicon. For hot lots, which are produced when a specific product is in high demand and companies need it ASAP, the standard time is approximately 50 days. However, Rapids promises 15 days for the wafer, which is never seen before, especially at a leading-edge node like 2 nm.The only metric to look forward to is execution, as we are waiting to see if Rapidus can achieve its goals as planned. In under three years, Rapidus has completed its IIM-1 milestones: after breaking ground in September 2023 and finishing the cleanroom in 2024, the company had connected more than 200 of the world's most advanced semiconductor tools by June 2025. Judging by the previous track record, it's not hard to believe in the Rapidus vision. However, as we have seen in the semiconductor manufacturing industry, some plans are almost impossible to keep up with, so we are closely monitoring the situation.
Source:
Austin Lyons on X
However, in 2027, Rapidus will be a node or two behind TSMC, and potentially even Intel. Therefore, the company wants to differentiate itself from the competition by being the most agile in the field. The company advertises a turnaround time of only 50 days for its proprietary all-single-wafer concept, whereas the batch-single mixed design typically requires around 120 days to completion. This cuts the waiting time for custom silicon from three months to just 50 days. Rapidus envisions this by using a custom backend that works with OSAT, EDA, IP, R&D, and tool materials to enable rapid turnaround times for silicon. For hot lots, which are produced when a specific product is in high demand and companies need it ASAP, the standard time is approximately 50 days. However, Rapids promises 15 days for the wafer, which is never seen before, especially at a leading-edge node like 2 nm.The only metric to look forward to is execution, as we are waiting to see if Rapidus can achieve its goals as planned. In under three years, Rapidus has completed its IIM-1 milestones: after breaking ground in September 2023 and finishing the cleanroom in 2024, the company had connected more than 200 of the world's most advanced semiconductor tools by June 2025. Judging by the previous track record, it's not hard to believe in the Rapidus vision. However, as we have seen in the semiconductor manufacturing industry, some plans are almost impossible to keep up with, so we are closely monitoring the situation.



6 Comments on Rapidus Tapes out 2 nm GAA Test Chip, Mass Production in 2027
If it succeeds that means theoretically in the US companies like Qualcomm, Nvidia, Apple, AMD, Amazon, Google, Microsoft, and Broadcom could together form a foundry company.