Monday, November 10th 2025

The EU to Decide on Future of the 6 GHz Band for Wi-Fi and Cellular Networks

With wireless spectrum being limited, a row has begun in the EU over the upper frequenices in the 6 GHz band (6425 to 7125 MHz) between the Wi-Fi Alliance and the Dynamic Spectrum Alliance (DSA) on one side and the mobile operators on the other side. The Wi-Fi Alliance and the DSA has penned an open letter to the EU digital ministers to try and sway their minds, after the German government has changed its position on the question in favour of the mobile operators ahead of a vote by the EU's Radio Spectrum Policy Group (RSPG). Currently, the 6 GHz Wi-Fi spectrum in the EU is limited to use the channels between 5945 MHz and 6425 MHz—this falls within the U-NII-5 band based on the FCC classification—which is a total of 12 usable 40 MHz channel groups. However, this only equates to three 160 MHz or two overlapping 320 MHz channel groups, which means that it's very crowded for anyone with a high-end router that wants to use it at its full potential. With Wi-Fi 6E/7 devices relying heavily on 160 and 320 MHz channel groups to deliver the claimed speed advantages they offer over older Wi-Fi standards, this far from ideal, even though the FCC U-NII bands still limits things, consumers have access to seven 160 MHz and three 320 MHz channel groups, of which none are overlapping, although technically there are six overlapping 320 MHz channel groups in the US and Canada.

On top of everything else, the EU has strict transmit power limitations and consumer 6 GHz Wi-Fi routers can only be used indoors based on current regulations, which limits the range these devices can transmit the signal to such a degree that it's unlike you would be able to use the 6 GHz band more than a room or two away from your router. It's hard to see that consumer Wi-Fi routers with such limited transmit power can interfere in any way with cellular infrastructure that transmits at much higher power. The Wi-Fi Alliance and the DSA are arguing that if the EU votes in favour of the mobile operators, there might not be enough available Wi-Fi channels in the 6 GHz in the EU, which might be true for businesses and other types of venues, but due to the short range of consumer 6 GHz devices in the EU, it's unlikely to affect most consumers to a huge degree. On the other hand, for exact the same reason, it doesn't make sense to make the upper 6 GHz band exclusive to the mobile operators, as they have already been assigned spectrum in a wide range of different frequency ranges that offers better speeds and range. Hopefully the rest of the EU won't agree with Germany on this issue, as the EU is already very limiting when it comes to available Wi-Fi spectrum and doesn't need further limits imposed on what is already a heavily crippled standard compared to many other parts of the world. The RSPG will vote on the matter on November 12.
Source: The Wi-Fi Alliance
Add your own comment

29 Comments on The EU to Decide on Future of the 6 GHz Band for Wi-Fi and Cellular Networks

#3
kondamin
Just open them up for the end user.
ISP's can't be **** to service anywhere not in dense cities, we would be better of installing it or selves.
Posted on Reply
#4
TheLostSwede
News Editor
kondaminJust open them up for the end user.
ISP's can't be **** to service anywhere not in dense cities, we would be better of installing it or selves.
I think you misunderstood the article.
This is about whether or not the upper 6 GHz will be allowed for unlicensed Wi-Fi usage at all or if it'll be given to the mobile phone operators to use as a licensed only band.
It has nothing to do with ISPs.
Posted on Reply
#5
Wirko
Oh the good old times when the congestion in the UHF TV frequency bands could be solved (somewhat) by using vertical polarisation in addition to horizontal.
Posted on Reply
#6
FoulOnWhite
Good old interfering EU. The sooner britain is truly out of this crap the better.

I guess this will just be for any EU countries then?
Posted on Reply
#7
TheLostSwede
News Editor
FoulOnWhiteGood old interfering EU. The sooner britain is truly out of this crap the better.

I guess this will just be for any EU countries then?
Interfering? I think you misunderstand and the UK has largely the same limitations as the EU currently has, you get an extra 20 MHz between 5925–5945 MHz, which is largely useless.
The UK has also banned the use of the upper 6 GHz for Wi-Fi, at least for now and has the same transmit power limitations.
Maybe read up on the topic before commenting?
Posted on Reply
#8
kondamin
TheLostSwedeI think you misunderstood the article.
This is about whether or not the upper 6 GHz will be allowed for unlicensed Wi-Fi usage at all or if it'll be given to the mobile phone operators to use as a licensed only band.
It has nothing to do with ISPs.
Sure, i consider a mobile operator an ISP too.

the only reason i have mobile service is because of Vowifi
Posted on Reply
#9
r00tcz
There was finally some possibility to have world wide standardized WIFI band, unlike the 5GHz that's total regulatory nightmare... but NO, thanks to these greedy bastards.
It's simply all about money. Releasing spectrum for free use doesn't allow the governments to rake in the money... but auctioning it allows them to fill the deficit in their horrible budgets.

It should be all opened up as generic ISM band - that's how it was supposed to be. Set some sane power limit and don't impose more unnecessary restrictions.
But no, I expect it will end up being even bigger mess than regular 5GHz band with all the stupid indoor/outdoor rules, DFS, LBT, etc. and only half of the band available too.
Posted on Reply
#10
FoulOnWhite
TheLostSwedeInterfering? I think you misunderstand and the UK has largely the same limitations as the EU currently has, you get an extra 20 MHz between 5925–5945 MHz, which is largely useless.
The UK has also banned the use of the upper 6 GHz for Wi-Fi, at least for now and has the same transmit power limitations.
Maybe read up on the topic before commenting?
So not imposed on the UK by the EU which all members have to follow, the EU has strict transmit power limitations. I assume they make the rules for all EU members, which the UK is still one or not, idk anymore.
Posted on Reply
#11
TheLostSwede
News Editor
r00tczThere was finally some possibility to have world wide standardized WIFI band, unlike the 5GHz that's total regulatory nightmare... but NO, thanks to these greedy bastards.
It's simply all about money. Releasing spectrum for free use doesn't allow the governments to rake in the money... but auctioning it allows them to fill the deficit in their horrible budgets.

It should be all opened up as generic ISM band - that's how it was supposed to be. Set some sane power limit and don't impose more unnecessary restrictions.
But no, I expect it will end up being even bigger mess than regular 5GHz band with all the stupid indoor/outdoor rules, DFS, LBT, etc. and only half of the band available too.
It's indeed a mess and it doesn't look like it's going to improve. DFS I can understand, but it also adds costs that the end consumers have to pay for at the end of the day. I use a DFS channel as it's the only channels on the 5 GHz band in the EU that has decent range and even at that, I barely have a signal outside my front door.
Considering the 6 GHz band has even shorter range, I don't understand why, with the current limitations in place, it can't be an ISM band for consumer products, as there's virtually a zero chance of interfering with anything.
FoulOnWhiteSo not imposed on the UK by the EU which all members have to follow, the EU has strict transmit power limitations. I assume they make the rules for all EU members, which the UK is still one or not, idk anymore.
So your government implementing the same limitations as the EU makes the limitations ok?
The UK has exactly the same strict limitations. The UK added support for the lower 6 GHz band ahead of the EU, so your logic makes zero sense here.
Posted on Reply
#12
FoulOnWhite
TheLostSwedeThe UK added support for the lower 6 GHz band ahead of the EU, so your logic makes zero sense here.
How, when i did not know that.
Posted on Reply
#13
remixedcat
I don't trust the EU to make good tech decisions.

We also need to use more frequencies... why tf are we so limited to a handful of frequencies? it's dumb and causing so much headaches. the govts are greedy and hogging em all
Posted on Reply
#14
TheLostSwede
News Editor
remixedcatI don't trust the EU to make good tech decisions.

We also need to use more frequencies... why tf are we so limited to a handful of frequencies? it's dumb and causing so much headaches. the govts are greedy and hogging em all
I don't trust governments to make good tech decisions, but the EU has at least pushed for a few things that have ended up being beneficial to consumers, such as USB-C as a common charging standards for most electronics.

The part I don't really understand, as far as consumer devices goes, if you limit the transmit power and have non-removable antennas, like all Wi-Fi 7 routers conform to, what's the issue in this instance, as it's hard enough going through a plaster board wall with 6 GHz, how does anyone expect these things to interfere with things on the other side of an external wall of a building?
Posted on Reply
#15
remixedcat
TheLostSwedeI don't trust governments to make good tech decisions, but the EU has at least pushed for a few things that have ended up being beneficial to consumers, such as USB-C as a common charging standards for most electronics.

The part I don't really understand, as far as consumer devices goes, if you limit the transmit power and have non-removable antennas, like all Wi-Fi 7 routers conform to, what's the issue in this instance, as it's hard enough going through a plaster board wall with 6 GHz, how does anyone expect these things to interfere with things on the other side of an external wall of a building?
well here in the usa we don't have thick stone walls those are so rare, we have mostly cardboard and fake wood houses, specially new construction is getting even more paper thin. so we are needing to have more different frequencies to avoid neighbors interferring.
Posted on Reply
#16
Aquinus
Resident Wat-man
TheLostSwedeI don't trust governments to make good tech decisions, but the EU has at least pushed for a few things that have ended up being beneficial to consumers, such as USB-C as a common charging standards for most electronics.

The part I don't really understand, as far as consumer devices goes, if you limit the transmit power and have non-removable antennas, like all Wi-Fi 7 routers conform to, what's the issue in this instance, as it's hard enough going through a plaster board wall with 6 GHz, how does anyone expect these things to interfere with things on the other side of an external wall of a building?
A lot of people are commenting like they've never used the 6Ghz band. I have, so let me clarify stuff for everyone. I have a WiFi 7 router and a WiFi 7 phone. 6Ghz attenuates stupid fast. I lose almost 40% of my bandwidth because of a single sheetrock wall, distance of about 15 feet. Once you're at two sheetrock walls and about 30 feet, the signal is practically unusable and you have to switch to 5Ghz or 2.4Ghz.

My personal take? Keep it unlicensed. Deployments will only make sense for large rooms in venues like conference centers. ISPs have very little use for that and they already have bands that cover that ground, at least here in the US. I'm not worried about congestion because the signal isn't even strong enough to leave my house.
remixedcatwell here in the usa we don't have thick stone walls those are so rare, we have mostly cardboard and fake wood houses, specially new construction is getting even more paper thin. so we are needing to have more different frequencies to avoid neighbors interferring.
See the above. Sheetrock is real good at blocking 6Ghz.
Posted on Reply
#17
remixedcat
AquinusSee the above. Sheetrock is real good at blocking 6Ghz.
what 6ghz stuff are you using so far as clients I know you use unifi
Posted on Reply
#18
Aquinus
Resident Wat-man
remixedcatwhat 6ghz stuff are you using so far as clients I know you use unifi
The only WiFi 7 client devices I have is my iPhone 16 Pro Max and my wife's iPhone 16. I get about 1.3-1.5Gbps when I stand next to the UDR 7. That 15 feet and one sheetrock wall metric drops download from 1.5Gbps to 1Gbps and upload from 1.3Gbps to 600Mbps, to give you an idea for how quickly the signal attenuates.

Edit: I should also mention that my phone only can connect to 160Mhz wide 6Ghz connections, but the UDR 7 supports 320Mhz.
Posted on Reply
#19
TheLostSwede
News Editor
remixedcatwell here in the usa we don't have thick stone walls those are so rare, we have mostly cardboard and fake wood houses, specially new construction is getting even more paper thin. so we are needing to have more different frequencies to avoid neighbors interferring.
They're pretty rare here too, but a lot of buildings are still made out of metal reinforced concrete and considering that modern windows here are blocking cellular signals, how does the politicians expect the weak Wi-Fi signal to go through?
I can only see two neighbours 5 GHz networks at times and that's with a signal strength of less than -90 dBm, which means I wouldn't even know if anyone is using the 6 GHz band in this building. Even on 2.4 GHz, no-one is above -80 dBm, which again is too low to connect to.
AquinusA lot of people are commenting like they've never used the 6Ghz band. I have, so let me clarify stuff for everyone. I have a WiFi 7 router and a WiFi 7 phone. 6Ghz attenuates stupid fast. I lose almost 40% of my bandwidth because of a single sheetrock wall, distance of about 15 feet. Once you're at two sheetrock walls and about 30 feet, the signal is practically unusable and you have to switch to 5Ghz or 2.4Ghz.

My personal take? Keep it unlicensed. Deployments will only make sense for large rooms in venues like conference centers. ISPs have very little use for that and they already have bands that cover that ground, at least here in the US. I'm not worried about congestion because the signal isn't even strong enough to leave my house.
Yeah, that's my understanding of how it works as well. And keep in mind that the US and Canada allows for higher transmit power than any country in Europe does.

The cellular network operators aren't planning on using it for Wi-Fi though, they want to use it for cellular signals, but I still don't see how the two will interfere, since routers simply don't come anywhere near to have the kind of transmit power a cellular tower does. It's just so dumb that the two can't coexist.
Posted on Reply
#20
remixedcat
here I cna see in between 12 and 17 networks from my porch and 8-12 from my living room. -_- I have to change frequencies every month or two and it's annoying. I only have 2.4 and 5ghz APs and i only have 3 wifi 6 clients and no wifi 7 ones.
Posted on Reply
#21
TheLostSwede
News Editor
remixedcathere I cna see in between 12 and 17 networks from my porch and 8-12 from my living room. -_- I have to change frequencies every month or two and it's annoying. I only have 2.4 and 5ghz APs and i only have 3 wifi 6 clients and no wifi 7 ones.
Yeah, you guys are allowed a lot more transmit power, up to 4 Watts, whereas the EU limits it to 1 Watt on the DFS bands.

My biggest Wi-Fi issue is this:

Posted on Reply
#22
remixedcat
TheLostSwedeYeah, you guys are allowed a lot more transmit power, up to 4 Watts, whereas the EU limits it to 1 Watt on the DFS bands.
and neighbors go and get a nighthawk and crank it up all the way too. meanwhile I turned my transmit down so I have less susceptabillty to their inferrterence.
TheLostSwedeYeah, you guys are allowed a lot more transmit power, up to 4 Watts, whereas the EU limits it to 1 Watt on the DFS bands.

My biggest Wi-Fi issue is this:

they look like my anubis!
Posted on Reply
#23
_roman_
en.wikipedia.org/wiki/List_of_WLAN_channels

6 GHz (802.11ax and 802.11be)
The Wi-Fi Alliance has introduced the term Wi‑Fi 6E to identify and certify IEEE 802.11ax devices that support this new band, which is also used by Wi-Fi 7 (IEEE 802.11be).

To answer the unaswerable AI question. / too bad it is not sarcasm but facts.


en.wikipedia.org/wiki/Wi-Fi_6

IEEE 802.11ax-2021[4] or 802.11ax, is an IEEE standard from the Wi-Fi Alliance, for wireless networks (WLANs). The standard is marketed as Wi-Fi 6.[5] It operates in the 2.4 GHz and 5 GHz bands,[6] with an extended version, Wi-Fi 6E, that adds the 6 GHz band.[7]

--

I am not sure, but it seems Wifi 6E is worthless in the eu. and all those motherboard advertising for wifi 6e and 7. I wonder how many consumers are aware of that some stuff is just air bubbles, e.g.:

network
description: Wireless interface
product: MT7922 802.11ax PCI Express Wireless Network Adapter
vendor: MEDIATEK Corp.
physical id: 0
bus info: pci@0000:10:00.0
logical name: wlan0
version: 00
serial: ***
width: 64 bits
clock: 33MHz
capabilities: pciexpress msi pm bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=mt7921e driverversion=6.17.7-gentoo_11_04_2025 firmware=____000000-20250523103234 ip=* latency=0 link=yes multicast=yes wireless=IEEE 802.11
resources: iomemory:fc0-fbf irq:114 memory:fc30300000-fc303fffff memory:a0100000-a0107fff
Posted on Reply
#24
Prima.Vera
Higher band, means higher power , means higher EM output. Does anyone ever think at health anymore??
Posted on Reply
#25
TheLostSwede
News Editor
_roman_en.wikipedia.org/wiki/List_of_WLAN_channels

6 GHz (802.11ax and 802.11be)
The Wi-Fi Alliance has introduced the term Wi‑Fi 6E to identify and certify IEEE 802.11ax devices that support this new band, which is also used by Wi-Fi 7 (IEEE 802.11be).

To answer the unaswerable AI question. / too bad it is not sarcasm but facts.


en.wikipedia.org/wiki/Wi-Fi_6

IEEE 802.11ax-2021[4] or 802.11ax, is an IEEE standard from the Wi-Fi Alliance, for wireless networks (WLANs). The standard is marketed as Wi-Fi 6.[5] It operates in the 2.4 GHz and 5 GHz bands,[6] with an extended version, Wi-Fi 6E, that adds the 6 GHz band.[7]

--

I am not sure, but it seems Wifi 6E is worthless in the eu. and all those motherboard advertising for wifi 6e and 7. I wonder how many consumers are aware of that some stuff is just air bubbles, e.g.:

network
description: Wireless interface
product: MT7922 802.11ax PCI Express Wireless Network Adapter
vendor: MEDIATEK Corp.
physical id: 0
bus info: pci@0000:10:00.0
logical name: wlan0
version: 00
serial: ***
width: 64 bits
clock: 33MHz
capabilities: pciexpress msi pm bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=mt7921e driverversion=6.17.7-gentoo_11_04_2025 firmware=____000000-20250523103234 ip=* latency=0 link=yes multicast=yes wireless=IEEE 802.11
resources: iomemory:fc0-fbf irq:114 memory:fc30300000-fc303fffff memory:a0100000-a0107fff
I hope you understand that the Wi-Fi Alliance is to a large degree a lobbying organisation and they are pushing for things that have been approved by the FCC to be approved by the EU and other countries as well. Wi-Fi 6E and Wi-Fi 7 aren't worthless in Europe or anywhere else that allows the unlicensed use of the 6 GHz band, as there are three non-overlapping 160 MHz channels that can be used, but if you want to use a 320 MHz channel, you're limited to two overlapping channels or a single non-overlapping channel. By allowing unlicensed use of the upper 6 GHz channels, this would enable a lot more spectrum for Wi-Fi and potentially other wireless technologies.
Note that at the time of writing, only the US and Canada allows the unlicensed use of the upper 6 GHz channels.

Also, Wikipedia has made some massive edits to the table of 6 GHz channels since I wrote the news post, but not explained how several countries have gained spectrum since then.
Prima.VeraHigher band, means higher power , means higher EM output. Does anyone ever think at health anymore??
Sorry? I don't think you're aware how highly restricted the output of a Wi-Fi router is.
The generally allowed transmit power on the 6 GHz band outside of the US and Canada, is 250 mW, but some bands are only allowed 25-100 mW.
On some limited frequencies you're allowed 1 Watt, although some countries allow for up to 4 Watts on some frequenices/channels.
This is non ionising radiation, it can't penetrate your skin.

Your local TV and radio transmitters are transmitting signals at upwards of 10 kW, in some cases even more.
Posted on Reply
Add your own comment
Nov 18th, 2026 05:43 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts