Monday, January 19th 2026

Zephyr "Sakura Snow X" GeForce RTX 4070 Ti SUPER Custom Card Nears Completion

Zephyr, a Chinese manufacturer of custom NVIDIA and AMD graphics cards, has shared some insights into the development of their "Sakura Snow X" GeForce RTX 4070 Ti SUPER 16 GB model. Last week, a progress report was published via the company's official Bilibili blog. A lone shot of this upcoming SFF-format gaming product shows a familiar shroud design—last year, TechPowerUp covered Zephyr's similarly decorated "Sakura Snow X" GeForce RTX 4070 12 GB model. The NVIDIA board partner is nearing the finish line with their latest Mini-ITX project—they describe this new model being almost complete, due to it passing their own "35℃ constant temperature chamber test."

The still-in-progress "Sakura Snow X" GeForce RTX 4070 Ti SUPER candidate's power consumption reached Team Green's reference limit—the "full 285 W"—whilst meeting performance standards of the standard issue board design. Zephyr's diminutive cooling solution consists of a single fan and a contained heatsink module. Engineers tried out two different fan speeds—3000 and 3800 RPM—combined with three finstack material options. "Under normal open conditions" they found that their pure copper module performed best, albeit with a driving up of costs. The graphene-coated aluminium module recorded similarly results-wise when compared to a bare aluminium subject. Zephyr noted that the black finish—on the graphene-augmented variant—gave off the appearance of being a higher-end product.

As expected, the 3800 RPM spin rate granted greater airflow; in turn lowering temperatures, but Zephyr picked up on a much higher noise level—commenting: "(it is) significantly higher (than the) 3000 RPM fan's noise level, (which) is similar to the regular 'Sakura Snow X' model's sound profile." Uniko's Hardware has weighed in—as an outsider observer—on the topic of Zephyr's methodologies. They took umbrage with the manufacturer's utilization of differing FurMark 2 release versions, and "stress test durations" being inconsistent across tests—the Hong Kong-based publication declared that Zephyr had performed an imperfect comparison. A quick survey is attached to Zephyr's Bilibili blog entry—asking readers to select their preferred fan speed: 3800 RPM or 3000 RPM. One commenter cheekily asked about a potential successor's release date. A highly-customized GeForce RTX 5070 Ti 16 GB card is very likely some distance away from launch.
Sources: Uniko's Hardware, Zephyr Bilibili Blog, VideoCardz
Add your own comment

10 Comments on Zephyr "Sakura Snow X" GeForce RTX 4070 Ti SUPER Custom Card Nears Completion

#1
Onasi
This is a rather specialized kind of masochism. I don’t think that many SFF builders are jumping at the chance to have a 3800 RPM screamer in their case. There are plenty of SFF cases with space enough for better cooling solutions and the REALLY extreme SFF builder running incredibly tiny ones aren’t likely to be looking at cards of this power envelope. This feels like a solution in search of a problem, but a somewhat cool one (pun intended), admittedly.
Posted on Reply
#2
agent_x007
That Furmark looks quite nicely undervolted - I have SERIOUS doubts you can do a non-PWR limited run with it on stock clocks/settings.
Posted on Reply
#3
Gucky
There are 4 GPUs that might be nice with such a cooler:
5060Ti 16GB
5070 with 2x8-Pins (for SFF compability)
9060XT 16GB
9070 <- Can run very well lower power.
Posted on Reply
#4
Nostras
Sometimes I question why TPU has set higher normalized noise levels than I'd be comfortable with, to see a chinese vendor casually asking if 3000RPM or 3800RPM is ok.
Most SFF owners I know are enthusiast about being small and silent. It's all about goodness/m^3.
So I vote 1500 RPM yes, can I?
Posted on Reply
#5
_roman_
Well for the poll: I only care for db or db(a). the lowest noise grahpic card which is available. (Whatever the correct unit now is.)

I think there was a list of factors how materials behave. What i remember is copper was better as aluminum. It's nice to see a proof from a company. I really wonder, do we need to proof basic physics again? I think there was also a factor that copper conducts better as aluminum.
Posted on Reply
#6
Chaitanya
Seems like Copper heatsinked one is running cooler with higher clocks(barely) and capable of running at higher power load. Personally would like to see nickel plated copper heatsink(to protect copper from tarnishing).
Posted on Reply
#8
Yensteel
I got the 4070 (Non ti non super) Sakura Snow X card and its insanely quiet. It just hums at full load. I didn't bother to down volt because of the low noise. Most mini itx cards like the Gigabyte 1080 are loud, so this is a pleasant surprise.

If you want a good ITX card, look no further than the Sakura Snow X series. This 4070 Ti super is likely going to louder and hotter, but you can just down volt and limit the power. There's no other card as small and quiet as this.

I kinda regret getting mine last September when it's briefly in stock, but not that much. The 4070 ti super might take a long while to find, and would be pretty expensive.
Posted on Reply
#9
Nathaaab
It's a cool card and it's nice for some cases that don't have that much GPU compatibility, but it's also a last gen GPU that will have a nice extra tax for being this tiny..
Posted on Reply
#10
Mr. Perfect
OnasiThis is a rather specialized kind of masochism. I don’t think that many SFF builders are jumping at the chance to have a 3800 RPM screamer in their case. There are plenty of SFF cases with space enough for better cooling solutions and the REALLY extreme SFF builder running incredibly tiny ones aren’t likely to be looking at cards of this power envelope. This feels like a solution in search of a problem, but a somewhat cool one (pun intended), admittedly.
Yeah, it's impressive engineering, but I'm not sure how many they'll sell. A pretty standard ~15L shoebox enclosure can fit a triple slot, triple fan cards without fuss these days.
Posted on Reply
Nov 18th, 2026 18:22 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts