Tuesday, March 31st 2026
Noctua and Asetek Announce Flagship AIO Liquid Coolers Complete PVT Phase, Targeted for Q2-2026 Launch
Since the announcement of their collaboration at Computex 2025, Noctua, a leading quiet PC cooling brand, and Asetek, a pioneer in all-in-one (AIO) liquid cooling, have continued to advance their flagship AIO liquid coolers. The products have now successfully completed the Production Validation Test (PVT) phase, confirming performance and manufacturing readiness ahead of the planned Q2 2026 launch.
The Asetek Emma (G8) V2 pump operates at a nominal speed of approximately 3,600 RPM (±300 RPM). Through collaboration with Noctua, several key performance aspects have been enhanced. Firstly, a triple-layer noise-reduction pump cover reduces both air-borne noise and structure-borne vibrations. Secondly, a dedicated mode switch allows users to choose between three different pump speed profiles to fine-tune performance-to-noise characteristics.Thirdly, the cooling system has been optimized through the pairing of Noctua's award-winning NF-A12x25 G2 and NF-A14x25 G2 fans with Asetek's Emma (G8) V2 radiators featuring a non-louvered fin design. This combination enables smooth airflow with low resistance, allowing the system to deliver strong thermal performance while meeting low-noise operation requirements, even at reduced fan speeds. The non-louvered design also helps minimize dust accumulation, supporting consistent long-term cooling efficiency.
Integration with Noctua Ecosystem
Featuring Noctua's SecuFirm2+ mounting system, the cooler is fully compatible with existing Noctua parts. Offset mounting options align with heat concentration zones on both Intel and AMD CPUs, delivering optimized thermal performance confirmed through benchmark testing.
Durability and Reliability
With a strong focus on long-term reliability and consistent performance, the design incorporates multiple engineering choices aimed at product longevity and quality. One example is the use of an Asetek-customized analog PWM controller tuned specifically for Noctua, offering greater stability and durability compared to typical software-based control solutions. In addition, extensive performance validation and reliability testing have been conducted to ensure consistent operation across use cases.
The latest milestone of successful PVT completion reflects the collaborative engineering effort and production progress between the two companies, confirming both the technical and operational excellence behind these upcoming flagship AIO liquid coolers.
The Asetek Emma (G8) V2 pump operates at a nominal speed of approximately 3,600 RPM (±300 RPM). Through collaboration with Noctua, several key performance aspects have been enhanced. Firstly, a triple-layer noise-reduction pump cover reduces both air-borne noise and structure-borne vibrations. Secondly, a dedicated mode switch allows users to choose between three different pump speed profiles to fine-tune performance-to-noise characteristics.Thirdly, the cooling system has been optimized through the pairing of Noctua's award-winning NF-A12x25 G2 and NF-A14x25 G2 fans with Asetek's Emma (G8) V2 radiators featuring a non-louvered fin design. This combination enables smooth airflow with low resistance, allowing the system to deliver strong thermal performance while meeting low-noise operation requirements, even at reduced fan speeds. The non-louvered design also helps minimize dust accumulation, supporting consistent long-term cooling efficiency.
Integration with Noctua Ecosystem
Featuring Noctua's SecuFirm2+ mounting system, the cooler is fully compatible with existing Noctua parts. Offset mounting options align with heat concentration zones on both Intel and AMD CPUs, delivering optimized thermal performance confirmed through benchmark testing.
Durability and Reliability
With a strong focus on long-term reliability and consistent performance, the design incorporates multiple engineering choices aimed at product longevity and quality. One example is the use of an Asetek-customized analog PWM controller tuned specifically for Noctua, offering greater stability and durability compared to typical software-based control solutions. In addition, extensive performance validation and reliability testing have been conducted to ensure consistent operation across use cases.
The latest milestone of successful PVT completion reflects the collaborative engineering effort and production progress between the two companies, confirming both the technical and operational excellence behind these upcoming flagship AIO liquid coolers.




16 Comments on Noctua and Asetek Announce Flagship AIO Liquid Coolers Complete PVT Phase, Targeted for Q2-2026 Launch
Still, I don't see much point—if you're technically capable—to this over using the same Noctua fans on a custom loop.
So they're saying while not really saying that their design sacrifices some performance to be as quiet as possible. That's fine, but they try to hide that by sayingso that spin doesn't look like "gives up some thermal performance to reduce noise" even though that's exactly what this would do, theoretically. This is precisely why some other companies that sell radiators are now using jagged or waved fin designs on them:
Also, have they ever had louvered radiator fins on the Asetek radiators? It seems interesting that they're advertising smooth fins as new when they've always looked like that as far as I recall. Their series 4 through series 8 catalog doesn't indicate anything about louvered fins and the pictures look like pretty straight fins. I did find a review from 2016 of an Alphacool radiator using louvered fins. Also, some older EK and others advertising non-louvered.
Edit: Sorry...I guess I just haven't seen anybody try so hard to market non-louvered fins before when that's a very standard option many companies have. Usually it's just low FPI and high FPI advertised so you get better performance at low RPM while sacrificing maximum performance...similar to what non-louvered vs. louvered would do.
I know Nocty makeS some good products, but if they had ditched that poopy-doodoo look, they would have had a BOATLOAD of my money over the years !
www.asetek.com/press-releases/asetek-unveils-ingrid-a-new-liquid-cooling-platform-delivering-silent-performance-customization-and-scalable-innovation/
This one uses Gen9:
Price wise it would be disruptive (compared to fancier AIOs) at $200, but I'm honestly expecting $300 which will be abysmal regarding price/perf.
It's supposed to have these "shark gills" on the fins, right?
cdn.chlaka.com/wp-content/uploads/2022/10/radiator-fins-1.webp
arctic for sure made money on those special offer aio coolers.
the 100€ wasted on an noctua cooler can be put in other parts where it matters more. for example 2 more extra amd cores should matter more than a noctua cooler.
when you want to build a showcase computer with an aquarium tank with two 4" 720x720 lcd displays on top of an aio go for it. nothing wrong when you want to show off an anime figure or a small toy car in your computer.
So while $150-200 may not seem like much for a top end rig... my thought process is that money saved could go to parts that actually IMPROVE performance. My testing shows that for 99.9% of work loads any 360 mm AIO will keep CPU cool enough even at the higher end. So real world you could spent $100-200 more for 5% better cooling and 5 dBA lower noise or just by the cheaper cooler set a custom PWM profile and use the savings to buy a better quality GPU, more ram, larger SSD, better quality PSU, all things that will impact day to day usage far more than a cooler will.
The other side of this is if Noctua releases a Chromax version i imagine that would be more popular but if this is another beige on brown. From an aesthetics standpoint and potential price standpoint I would probably 95% pass. I am not someone that chases 1-2% differences. I need a viable noticeable reproduceable difference. Furthermore on actual cooling I look for ease of setup / cable management / software resource usage. I have no doubt Noctua can likely release a top performing AIO. The real question is will I want to actual own one?
I love there fans... but for say case fan usage they dont make a big enough impact for me to consider them viable for the price. I love the NH-D15 G2 Chromax.black but I could just grab an equally appealing option for 1/3 to 1/4 price with enough cash left over to add my choice of fans and still go out to dinner. The quality aspect of Noctua and there support is absolutely amazing. I am just not there target demographic
Which it is.
Given that radiator optimizations (not just fin louvering) can bring gains, at least big enough to beat the competition (apart from fans, mounting, coldplate etc.), not bothering with them spells lazy.
The acknowledgement that for future products it could be considered again (indirectly) says that this attempt is not maximum effort (80/20 rule called).
It's pretty much a hipster collab that is carried primarily by brand name and is intended to test the waters regarding pricing first and foremost.
The one segment of this AIO which does have notable R&D behind it is the pump block, specifically the noise dampening and VRM fan.
The mounting could also have some effort put into it if it has offsets for both platforms.The fans I would argue are not specifically made for this product but for the broader market, which this vanilla radiator conform to anyway.
The fans were made to be used as case fans (in various cases) or radiator fans (various radiators on both AIOs or for watercooling which have different thickness and FPI) so they have to be pretty versatile.
This conflicts with having a specific radiator profile which potentially requires a specialized fan to be paired with for maximum noise to performance ratio.
Thus the R&D for the fans should not be included in the total R&D of this product.
Still interested in the test results, but probably more interested to know the MSRP.