How To: Enable SLI on pre-i7/i5 hardware

anatolymik · Sep 23, 2011

snipe said:
Hey I hope Hyper is out before the 27th, but my guess is the countdown is it so that is OK, Nvidia is releasing a SPECIAL driver on Sept 26th for BF3 Beta, so I guess modded drivers will have to work.

http://bf3blog.com/2011/09/nvidia-preparing-special-drivers-for-battlefield-3-beta/

Tommorow i'll be working on x32 HyperSLI. it's completely wrote but not debugged yet. x64 is finished and works ok. as i mentioned before, while i'm working on the HyperSLI i'll be modding drivers so you will have sli in any case. too bad but i'm working a lot(8:00am-12:00pm). when i have time i'm working on HyperSLI.

DeahSeed · Sep 23, 2011

Thanks for all your hard work but can you release the x64 version since it's done?

Velvet Wafer · Sep 23, 2011

DeahSeed said:
Thanks for all your hard work but can you release the x64 version since it's done?

Patience, young Padawan... the Patch is still under construction, and it wouldnt wonder me if there were still a few minor Bugs, Anatolymik is still fixing... he works as hard as humanly possible.

snipe · Sep 24, 2011

I found a glitch with I think the modded drivers, I tried running CAN YOU RUN IT for BF3 and it says my video card is as NVxx so I meet min but not recommended. LOL

snipe · Sep 24, 2011

anatolymik said:
Tommorow i'll be working on x32 HyperSLI. it's completely wrote but not debugged yet. x64 is finished and works ok. as i mentioned before, while i'm working on the HyperSLI i'll be modding drivers so you will have sli in any case. too bad but i'm working a lot(8:00am-12:00pm). when i have time i'm working on HyperSLI.

Sorry for double post.

Thanks for the update can't wait to test it out. I just wish you had 2 seperate versions, x32 and x64 so the peeps with x64 would be set to roll. LOL Anyways keep it up.

johnspack · Sep 24, 2011

Patience Grasshopper.... as per Velvet's post above heheh!

anatolymik · Sep 25, 2011

Just got x32 HyperSLI works. keep working. next step is checking and testing

juanchacin · Sep 25, 2011

anatolymik said:
Just got x32 HyperSLI works. keep working. next step is checking and testing

Tell me anatolymik, are you planning to launch HyperSLI on october 1st?

anatolymik · Sep 25, 2011

juanchacin said:
Tell me anatolymik, are you planning to launch HyperSLI on october 1st?

i'll try. i'm working in HyperSLI when have time for it

snipe · Sep 26, 2011

I am crossing my fingers, can't wait to be able to update drivers as soon as they release.

daverave01 · Sep 26, 2011

Hey Guys

I have a P8P67 LE Mobo with a GTX460, im looking to use SLI however noticed that the board only supports crossfire.

Has anyone had any success using the SLI patch?

Thanks

snipe · Sep 26, 2011

Not sure, but I would wait until HyperSLI releases maybe this week. Figners Crossed.

anatolymik · Sep 26, 2011

http://anatolymik.itzod.ru/

285.38 Windows Vista and 7 x32 Modded driver available.
285.38 Windows Vista and 7 x64 Modded driver available.

anatolymik · Sep 26, 2011

HyperSLI coming soon... Short info:

For complete working of HypreSLI you must have Virtualization Technology enabled in BIOS.
First release would have only Intel processors supported for now. AMD will be supported when i get AMD platform and write for it.
There will be software approach, which would not require Virtualization Technology. After first release i'll take care about software approach.

Cyberz · Sep 26, 2011

anatolymik said:
http://anatolymik.itzod.ru/

285.38 Windows Vista and 7 x32 Modded driver available.
285.38 Windows Vista and 7 x64 Modded driver available.

Do you first install the drivers and then apply this modified files?

anatolymik · Sep 26, 2011

Cyberz said:
Do you first install the drivers and then apply this modified files?

Install drivers first

technogiant · Sep 26, 2011

Thank you Anatolymik, 285.38 mod working fine on my Q6600/X38 win7 64bit 2xgtx460's.

You are solid gold.

antandshell · Sep 26, 2011

You are the man!!!! I want to be like you when i grow up!

anatolymik said:
HyperSLI coming soon... Short info:

For complete working of HypreSLI you must have Virtualization Technology enabled in BIOS.
First release would have only Intel processors supported for now. AMD will be supported when i get AMD platform and write for it.
There will be software approach, which would not require Virtualization Technology. After first release i'll take care about software approach.

DeahSeed · Sep 26, 2011

Thats kind of a bummer intel first will you still be working on modded drivers for the people with AMD?

federicoz45 · Sep 27, 2011

I confirm too 285.38 works fine on my crosshair IV formula/ win7 64 /2 x gtx570. Thanks as always.

anatolymik · Sep 27, 2011

DeahSeed said:
Thats kind of a bummer intel first will you still be working on modded drivers for the people with AMD?

Of course. While no supporting of AMD i'll be modding drivers for these people...

DeahSeed · Sep 27, 2011

Cool thanks

johnspack · Sep 27, 2011

We are on final stages of testing. HyperSli is almost ready. Just sit back and enjoy the ride!

juanchacin · Sep 27, 2011

johnspack said:
HyperSli is almost ready. Just sit back and enjoy the ride!

Waiting for testing.
BTW. anatolymik are you planning to open a new tread for HyperSLI?
It would be a good idea!

johnspack · Sep 27, 2011

Testing should be completed shortly. Final HyperSli will be announced here. Patience! As for a new thread, that's up to anatolymik. His priority right now is just getting it out the door, and working perfect.

Processor	AMD x4 965 BE
Motherboard	ASUS Crosshair IV Formula
Cooling	Water cooled
Memory	8 Gigs corsair xms 3
Video Card(s)	2 gtx 470's
Storage	2 TB
Display(s)	Acer 21.5 inch LED
Case	Cooler Master HAF 912 full tower
Audio Device(s)	onboard
Power Supply	950 Watt

System Name	Nexus PC
Processor	Intel Xeon E3-1231 v3, 3600 MHz
Motherboard	Gigabyte GA-H97-HD3
Cooling	Thermalright Macho V2
Memory	24GB DDR3, 1400MHZ CL8
Video Card(s)	Sapphire Radeon R9 290
Storage	Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s)	1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case	Sunflower Tower
Audio Device(s)	C-Media CMI8738/C3DX
Power Supply	Corsair TX850
Mouse	Cyborg R.A.T. 7
Software	Win7 64Bit Ultimate

System Name	System2 Blacknet , System1 Blacknet2
Processor	System2 Threadripper 1920x, System1 2699 v3
Motherboard	System2 Asrock Fatality x399 Professional Gaming, System1 Asus X99-A
Cooling	System2 Noctua NH-U14 TR4-SP3 Dual 140mm fans, System1 AIO
Memory	System2 64GBS DDR4 3000, System1 32gbs DDR4 2400
Video Card(s)	System2 GTX 980Ti System1 GTX 970
Storage	System2 4x SSDs + NVme= 2.250TB 2xStorage Drives=8TB System1 3x SSDs=2TB
Display(s)	2x 24" 1080 displays
Case	System2 Some Nzxt case with soundproofing...
Audio Device(s)	Asus Xonar U7 MKII
Power Supply	System2 EVGA 750 Watt, System1 XFX XTR 750 Watt
Mouse	Logitech G900 Chaos Spectrum
Keyboard	Ducky
Software	Manjaro, Windows 10, Kubuntu 23.10
Benchmark Scores	It's linux baby!

System Name	Black-Raptor
Processor	Intel i7 2600K @4.5Ghz
Motherboard	Gigabyte GA-Z68X UD4 B3
Cooling	CM Hyper 212 plus
Memory	Corsair XMS3 8Gb
Video Card(s)	SLI GTX 660Ti
Storage	500Gb Samsung, 80Gb Maxtor
Case	Tt V3 Black Edition
Audio Device(s)	Sound Blaster Recon3D
Power Supply	Tt Toughpower XT 750w

Processor	Qx9650
Motherboard	Ga-EP45-UD3P
Cooling	Corsair H80
Memory	Corsair Dominator
Video Card(s)	GTX 560TI x2
Storage	Raptors
Power Supply	Antec 750 Gamer Edition

System Name	Water Damage Inc.
Processor	AMD Phenom X6 1090T
Motherboard	Asus Crosshair IV Formula
Cooling	Full watercooled EK W.B. - Aquacomputer Gmbh. CPU-MB-VGA
Memory	Corsair XMS3 DDR 3 8gb 1600 Mhz
Video Card(s)	P.O.V. GTX 570 U.C. - EVGA GTX 570 S.C.
Storage	SSD vertex 2 64 Gb - SSD Agility 4 128 Gb
Display(s)	ASUS VE278Q
Case	CoolerMaster CM690 Nvidia edition
Audio Device(s)	Built in MB
Power Supply	Thermaltake Toughpower 1350W
Software	Windows 7 x64 ultimate

How To: Enable SLI on pre-i7/i5 hardware

New Member

New Member

New Member

Here For Good!

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

Here For Good!

Here For Good!