-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
How To: Enable SLI on pre-i7/i5 hardware
- Thread starter bluevelvetjacket
- Start date
- Joined
- Jun 16, 2009
- Messages
- 5,123 (0.88/day)
- Location
- North of Germany
| System Name | Nexus PC |
|---|---|
| Processor | Intel Xeon E3-1231 v3, 3600 MHz |
| Motherboard | Gigabyte GA-H97-HD3 |
| Cooling | Thermalright Macho V2 |
| Memory | 24GB DDR3, 1400MHZ CL8 |
| Video Card(s) | Sapphire Radeon R9 290 |
| Storage | Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational. |
| Display(s) | 1xAsus MX299, 2x Asus MX239, Oculus Rift CV1 |
| Case | Sunflower Tower |
| Audio Device(s) | C-Media CMI8738/C3DX |
| Power Supply | Corsair TX850 |
| Mouse | Cyborg R.A.T. 7 |
| Software | Win7 64Bit Ultimate |
right. i hear the upgrade bells ring.... they say "quadcore, dingeling,quadcore"
- Joined
- Jun 16, 2009
- Messages
- 5,123 (0.88/day)
- Location
- North of Germany
| System Name | Nexus PC |
|---|---|
| Processor | Intel Xeon E3-1231 v3, 3600 MHz |
| Motherboard | Gigabyte GA-H97-HD3 |
| Cooling | Thermalright Macho V2 |
| Memory | 24GB DDR3, 1400MHZ CL8 |
| Video Card(s) | Sapphire Radeon R9 290 |
| Storage | Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational. |
| Display(s) | 1xAsus MX299, 2x Asus MX239, Oculus Rift CV1 |
| Case | Sunflower Tower |
| Audio Device(s) | C-Media CMI8738/C3DX |
| Power Supply | Corsair TX850 |
| Mouse | Cyborg R.A.T. 7 |
| Software | Win7 64Bit Ultimate |
i believe CPU´s are the only part that cant be brought back to life (i never saw a defect proc,only heard of 3-4, besides the usual "crushed die" victims)
Hello, first off all i have a P5Q-E not very different from yours.
To install, disable UAC, an to lauch installer right click on installSLI.cmd en choose "run as administrator". Reboot and at the new start it say sli enabled, go on nvidia control panel and you can choose sli.
If you donc run as admin ou not disable UAC it dont work.
- Joined
- Jun 21, 2009
- Messages
- 1,433 (0.25/day)
Hello anatolymik!
I am running Q9550, Asus P5Q Deluxe, Windows 7 32bit, EVGA GTX 216 + BFG GTX260 216.
Forceware dirvers 196.21 and 196.34, UAC disabled.
I disabled the UAC, reboot, installed the drivers, reboot, installed SLI Patch, reboot...
I installed the patch without any problems, it did create a separate profile Windows 32bit SLI enabled. I click on it, it almost loads and then Windows repair tool comes up and it says "NTOSKRNL.EXE is missing or corrupt."
I do no think there is the problem with your patch, it seems Nvidia added new crap that is why your patch does not work with with the latest drivers. I m going to try the install tonight or tomorrow with Forcewware 195. I also talked to on of the users at overclock.net and he said this
"i tried the 196.21 drivers and it botched my non sli system same error so i had to reinstall os and after all prob peeps with 196.21 drivers i have not tried 196.34"
THANK YOU FOR YOUR AWESOME WORK!
- Joined
- Jun 16, 2009
- Messages
- 5,123 (0.88/day)
- Location
- North of Germany
| System Name | Nexus PC |
|---|---|
| Processor | Intel Xeon E3-1231 v3, 3600 MHz |
| Motherboard | Gigabyte GA-H97-HD3 |
| Cooling | Thermalright Macho V2 |
| Memory | 24GB DDR3, 1400MHZ CL8 |
| Video Card(s) | Sapphire Radeon R9 290 |
| Storage | Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational. |
| Display(s) | 1xAsus MX299, 2x Asus MX239, Oculus Rift CV1 |
| Case | Sunflower Tower |
| Audio Device(s) | C-Media CMI8738/C3DX |
| Power Supply | Corsair TX850 |
| Mouse | Cyborg R.A.T. 7 |
| Software | Win7 64Bit Ultimate |
Hello anatolymik!
I am running Q9550, Asus P5Q Deluxe, Windows 7 32bit, EVGA GTX 216 + BFG GTX260 216.
Forceware dirvers 196.21 and 196.34, UAC disabled.
I disabled the UAC, reboot, installed the drivers, reboot, installed SLI Patch, reboot...
I installed the patch without any problems, it did create a separate profile Windows 32bit SLI enabled. I click on it, it almost loads and then Windows repair tool comes up and it says "NTOSKRNL.EXE is missing or corrupt."
I do no think there is the problem with your patch, it seems Nvidia added new crap that is why your patch does not work with with the latest drivers. I m going to try the install tonight or tomorrow with Forcewware 195. I also talked to on of the users at overclock.net and he said this
"i tried the 196.21 drivers and it botched my non sli system same error so i had to reinstall os and after all prob peeps with 196.21 drivers i have not tried 196.34"
THANK YOU FOR YOUR AWESOME WORK!
you really know, you got the right version of the patch?
that sounds like you installed the patch for another OS.
superkaras
New Member
- Joined
- Feb 18, 2010
- Messages
- 2 (0.00/day)
Ok, I found out why my SLI wasn't working. First, I installed only 1 bridge XD. I fix'd that problem in a jiffy.
My second problem comes when I shutdown and boot up my computer. The SLI in Nvidia CP does not show up any more. So what I did was remove both SLI bridge, boot up Windows. Doing that, my SLI reappeared again, so I shut down and attached the Bridge. SLI is available again. However, if I turn off my computer for a very long time, apparently the SLI options disappear in the CP. Thus, I have to start the steps all over again.
I still in the SLIEnabled Windows boot, though. Has anyone else have this problem?
My second problem comes when I shutdown and boot up my computer. The SLI in Nvidia CP does not show up any more. So what I did was remove both SLI bridge, boot up Windows. Doing that, my SLI reappeared again, so I shut down and attached the Bridge. SLI is available again. However, if I turn off my computer for a very long time, apparently the SLI options disappear in the CP. Thus, I have to start the steps all over again.
I still in the SLIEnabled Windows boot, though. Has anyone else have this problem?
you really know, you got the right version of the patch?
that sounds like you installed the patch for another OS.
Yes. The patch does not work with the latest version of Forceware drivers that is 196.
- Joined
- Jun 16, 2009
- Messages
- 5,123 (0.88/day)
- Location
- North of Germany
| System Name | Nexus PC |
|---|---|
| Processor | Intel Xeon E3-1231 v3, 3600 MHz |
| Motherboard | Gigabyte GA-H97-HD3 |
| Cooling | Thermalright Macho V2 |
| Memory | 24GB DDR3, 1400MHZ CL8 |
| Video Card(s) | Sapphire Radeon R9 290 |
| Storage | Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational. |
| Display(s) | 1xAsus MX299, 2x Asus MX239, Oculus Rift CV1 |
| Case | Sunflower Tower |
| Audio Device(s) | C-Media CMI8738/C3DX |
| Power Supply | Corsair TX850 |
| Mouse | Cyborg R.A.T. 7 |
| Software | Win7 64Bit Ultimate |
Yes. The patch does not work with the latest version of Forceware drivers that is 196.
on win7 x64, par excellence!
had no problems regarding that
on win7 x64, par excellence!
had no problems regarding that
You lucky bastard!
I am going to install Windows7 x64 and see what happens.
- Joined
- Jun 16, 2009
- Messages
- 5,123 (0.88/day)
- Location
- North of Germany
| System Name | Nexus PC |
|---|---|
| Processor | Intel Xeon E3-1231 v3, 3600 MHz |
| Motherboard | Gigabyte GA-H97-HD3 |
| Cooling | Thermalright Macho V2 |
| Memory | 24GB DDR3, 1400MHZ CL8 |
| Video Card(s) | Sapphire Radeon R9 290 |
| Storage | Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational. |
| Display(s) | 1xAsus MX299, 2x Asus MX239, Oculus Rift CV1 |
| Case | Sunflower Tower |
| Audio Device(s) | C-Media CMI8738/C3DX |
| Power Supply | Corsair TX850 |
| Mouse | Cyborg R.A.T. 7 |
| Software | Win7 64Bit Ultimate |
You lucky bastard!
its an upgrade, even if it wont work
Last edited:
- Joined
- Jun 21, 2009
- Messages
- 1,433 (0.25/day)
I will wait for for anatolymik....
it must work
YOU are the SHIT!!!!!!!!!!!!!
Installed without a a single problem on Win7 x64 Pro. This time I installed the patch via CMD and executed the file (InstallSLI) from within.... I guess it was the problem last time. I am about to install GRID and I need to get a bridge from ebay.For the time being, thank you very much anatolymik!
p.s. we need more people like you to "hack" everything!
.
Hey guys i tried to do this patch with mir asus crosshair III !
my nvidia driver is 196.21 and my os is win7 64bit.
so i downloaded sli patch 0.7 Win7 x64 alpha
then i startet installSLI.cmd .
at reebot there was the message sli enable ...
when i was then in my nvidia systemconfiguration there was no sli function .
what did i false ?
please help me thanks .
Hey guys i tried to do this patch with mir asus crosshair III !
my nvidia driver is 196.21 and my os is win7 64bit.
so i downloaded sli patch 0.7 Win7 x64 alpha
then i startet installSLI.cmd .
at reebot there was the message sli enable ...
when i was then in my nvidia systemconfiguration there was no sli function .
what did i false ?
please help me thanks .
Windows > Start > CMD > navigate to the the right folder and then start installSLI.cmd. from within CMD. Otherwise it will not work.
- Joined
- Dec 15, 2009
- Messages
- 234 (0.04/day)
- Location
- Austria
mcflops:
i got the same prob i reinstalled my os but still got the same prob and i don't have a 2nd graphic card. Back then the Hal hack worked for me only with one gpu, so i expected that the new method would work to.
In that way i could confirm that the patch work and i could bay an 2nd gpu.
(sry im a bit drunk xD)
i got the same prob i reinstalled my os but still got the same prob and i don't have a 2nd graphic card. Back then the Hal hack worked for me only with one gpu, so i expected that the new method would work to.
In that way i could confirm that the patch work and i could bay an 2nd gpu.
(sry im a bit drunk xD)
The SLI hack will not work with one video card, period. :shadedshu You have to have two video cards installed prior to software installation.
Sailindawg
New Member
- Joined
- Sep 22, 2009
- Messages
- 31 (0.01/day)
| Processor | Q6600 |
|---|---|
| Motherboard | Black Ops |
| Cooling | D-Tek Fuzion v2, MCW30 + Swiftech MCR Drive 360 |
| Memory | 8 G Mushkin D9GTR/S |
| Video Card(s) | 5870 |
| Storage | Intel X-25 + Raptors |
| Display(s) | HP LP2475 |
| Case | CM Stacker TC101 |
| Audio Device(s) | X-Fi Xtreme Music |
| Power Supply | PCP&C 910 Silencer |
| Software | Win 7 64 bit Pro |
You need 2 of the same model cards. If you use 2 different model cards, one for PhysX and one for graphics, you will not see the SLI check boxes.