cdawall
where the hell are my stars
- Joined
- Jul 23, 2006
- Messages
- 27,680 (4.27/day)
- Location
- Houston
System Name | All the cores |
---|---|
Processor | 2990WX |
Motherboard | Asrock X399M |
Cooling | CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL |
Memory | 4x16GB G.Skill 3600 |
Video Card(s) | (2) EVGA SC BLACK 1080Ti's |
Storage | 2x Samsung SM951 512GB, Samsung PM961 512GB |
Display(s) | Dell UP2414Q 3840X2160@60hz |
Case | Caselabs Mercury S5+pedestal |
Audio Device(s) | Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood |
Power Supply | Seasonic Prime 1200w |
Mouse | Thermaltake Theron, Steam controller |
Keyboard | Keychron K8 |
Software | W10P |
so i noticed on the thread it says for 754 socket mobo the ht should never go above 800 now i have one comp on an dfi lanparty ut 250 gb with a 3200+@2.7ghz ram at 400 and ht at 975 with no volt bumb and ive been runin that computer 24/7 for about 3 years and i have never experienced any problems am i just lucky or with the right 754 mobo is the higher ht speeds ok
not a big deal check my sig mine runs over 1000mhz it is just often a stability issue if it gets pushed to much