Sunday, April 2nd 2023
AMD's A620 Chipset More Capable Than Early Motherboards Suggest
For whatever reason, all of the AMD A620 chipset based motherboards that were announced on Friday, are not showing off the capabilities of the chipset and are in fact making it look worse than it is. AMD has no doubt limited the A620 platform, with some limitations that seem arbitrary, but the motherboards makers clearly haven't helped, as they've made the platform look very unattractive, when in fact it could be entirely acceptable, for a budget build. As you can see from AMD's feature matrix below, the company has removed a fair share of features compared to the B650 chipset, but for example, two 10 Gbps USB 3.2 Gen 2 ports can be implemented. Despite this, only Biostar and Gigabyte have implemented one such port each, with ASUS, ASRock and MSI implementing zero.
Yes, the platform is limited to 65 W CPUs—assuming you want your CPUs boost behaviour to work as intended—which is likely to cause some issues, as it might not be clear to potential buyers that are looking for a cheap motherboard for their system and it's something AMD and its board partners need to communicate a lot better. However, the A620 platform has enough PCIe lanes for two M.2 drives and enough left for all the peripheral connectivity and some PCIe slots, yet most of the boards appear to shun a second M.2 slot for no apparent reason beyond the cost of the physical interface. It looks as if AMD's board partners have decided to try and cut back as much as they can in terms of features that we've ended up with boards that no sensible person should be buying, as the boards are barely fit for purpose. Time will tell if we'll see some better boards down the road, but it would appear that AMD's board partner would rather sell its potential customers a more expensive B650 board, based on the weak line-up of boards that launched on Friday.
Yes, the platform is limited to 65 W CPUs—assuming you want your CPUs boost behaviour to work as intended—which is likely to cause some issues, as it might not be clear to potential buyers that are looking for a cheap motherboard for their system and it's something AMD and its board partners need to communicate a lot better. However, the A620 platform has enough PCIe lanes for two M.2 drives and enough left for all the peripheral connectivity and some PCIe slots, yet most of the boards appear to shun a second M.2 slot for no apparent reason beyond the cost of the physical interface. It looks as if AMD's board partners have decided to try and cut back as much as they can in terms of features that we've ended up with boards that no sensible person should be buying, as the boards are barely fit for purpose. Time will tell if we'll see some better boards down the road, but it would appear that AMD's board partner would rather sell its potential customers a more expensive B650 board, based on the weak line-up of boards that launched on Friday.



51 Comments on AMD's A620 Chipset More Capable Than Early Motherboards Suggest
Seems many of them will only fit 2 ram slots, that is good in my opinion as it usually is easier to OC\tune ram on 2dimm boards than 4dimm. Also brings down cost and makes it possible to make boards slimmer for small case builds.
7800X3D + 2dimm board + 2x16 Hynix ram clocked to 6400-6600 and tuned + curve optimizer = my goto for a very good budget setup!
Board partners gimping VRM-sections might lay waste to your value proposal.
You can find threads here on TPU about both 5800X3Ds and AM5 3DVcache not-APUs having power issues related to lightened-duty VRMs on motherboards.
I bet we will see "better" boards with Promontory 22 and this ist just a stop-gap solution. I dont need much more for many client-pcs as a620 can offer, just good build and designed boards.
PCIe 5.0 is not needed here at all. No one will miss it. B650 does not have it either.
Asrock used all 24 PCIe 4.0 lanes for GPU and two M.2 slots, so this is fine.
Chipset needs to be PCIe 3.0 and a few lanes and ports less, otherwise there is no difference with B650.
The only thing missing on Asrock's board is USB 10 Gbps. I hope other vendors provide up to two of those.
A620 has more lanes than B550 overall - four additional Gen4 lanes and two Gen3 lanes less. It's fine for ~$100
The AsRock A620 boards are selling for $85 on Newegg US right now. Regardless of how basic you think they are, those are affordable prices.True. It's not limited to 65W, the wattage support is mentioned in the product name (on Newegg at least).
I'm just expecting those boards to be around $150, based on as you can see above, their entry level models being $86 and $100, which makes the higher-end models meh.
At least ASRock didn't skimp on the VRM on its higher-end boards, but the entry level model is 4+1+1 design which just shouldn't be fitted on a motherboard in 2023.
Note that the PCIe 3.0 and SATA ports are shared, so that's something that limits any board that uses SATA, unless you add a third party chipset, which adds cost.That's the only boards that have been listed for sale in the US so far and AMD even went out with that $86 price as their headline from pricing, which is for a board that I would recommend everyone and their dog to steer clear of.
Find the US pricing for the Asus boards and we can start talking about what is what, as they'll be $150+.
Compare the A620 and the Intel H610, which is the cheapest chipset that supports Intel 13th gen. From AsRock:
AsRock H610M
AsRock A620M
They both sell for almost the same price ($80 Intel vs $86 AMD). For $6 more, the AMD board gets you faster DDR5, 2 NVMe slots vs 0 on the Intel, more fast IO ports, an M.2 Wi-Fi slot, slightly better VRM, and future upgradability because we all know Intel 14th gen won't be supported on H610.
Look, I know this is an editorial, but it doesn't make any sense to me.
It's like complaining that a baseline Toyota Corolla doesn't have all the options that a Toyota Corolla can be spec'ed with. And that it's sold more expensive in Singapore vs the USA.
I do get things are more expensive and probably complexity increased too, but come on it's unaceptable to me a 100% price increases in such a small time period. Motherboards and GPU's are on a special class of inflation, it's more like Venezuela style of inflation.
The point was that you should have VERY low expectations for these bottom tier products, and that even at the lowest tier, you're still getting a better product year-over-year for roughly the same price as before (in the US) - trade price hikes in certain countries are not the board makers fault - blame the governments and their ridiculous import trade policies. :laugh:
Like I said, if A620 prices are doubling in a specific country compared to other countries then that's a different story.
Perhaps its intentional sabotage of A620 by board vendors because they don't want to undermine their strong B550 sales.
AM4 is currently serving the budget builds; There are many decent sub-$100 B550 boards that will support a (stock) 5950X without any problems. Sure, a PBO limit of just 150W on a bargain-basement board like the GA-B550-DS3H isn't exactly an overclocker's dream, but it'll support the processor just fine with no other compromises and has all of the expected features, given the chipset and amount of physical space on tap.
I hate to say it, because it's TWO generations old at this point, but Rocket Lake is still good. It's cheaper than an A620 and honestly the price/performance of 11th-Gen i5 is still great. Depending on what performance tier you're after it can be better than AM4. Intel's mid-range Raptor Lake i5s are almost good enough to overlook the more expensive LGA 1700 platform, provided you're running W11 - 16 threads for $225, and 6P cores with high clocks and AM5-rivalling IPC? It's enough to make B620 look bad even before you factor in the phoned-in board designs.
Not sure how the future looks, but 12VO and PCIE5 will force some change. Both in real estate and layers of the boards.
As is, the A620 boards are just fine. Apart from the lack of m.2 for WLAN on some, they got what people need, and then some. Like SATA ports or expansion slots.
Most likely just an oversight from AMD's side.
I'm actually hoping for a full revamp of PC power delivery one day. One connector from the PSU to the motherboard and that's it. Everything else is fully powered via the motherboard: CPU via the socket and GPU via PCIe slot. SATA is dead.
Motherboards will probably have to triple in price to accommodate all the extra current and necessary shielding, but hey, easier cable management. :laugh: