Friday, December 26th 2025

Sapphire Intros NITRO+ Phantom Link Radeon RX 9070 XT and X870E Socket AM5 Motherboard

Sapphire launched its flagship graphics card and motherboard featuring PhantomLink discreet power delivery technology. The tech sees an ASUS BTF-like GC-HPWR power-delivery slot located along the plane of the main PCI-Express 5.0 x16 slot, which delivers power to the graphics card without you having to wrestle with a delicate 12V-2x6 cable on top of the card. But then there's a catch. The motherboard isn't designed on the philosophy of backside connectivity like ASUS BTF or MSI Project Zero or GIGABYTE Stealth, the connects are all still located along the obverse side of the PCB. There is a 600 W-capable 12V-2x6 input located next to the 24-pin ATX, which simply routes power to the GC-HPWR slot.

Launching today, are the Sapphire NITRO+ Radeon RX 9070 XT PhantomLink PE graphics card, and the NITRO+ X870EA PhantomLink Socket AM5 motherboard. Both products have an identical silver-white color scheme and NITRO+ design theme that pair well visually. The graphics card features an overclocked RX 9070 XT with similar specs to the regular NITRO+ RX 9070 XT from Sapphire. The motherboard comes in two color trims, white+silver and black+silver. It offers a premium CPU VRM solution, a heavy M.2 PCIe Gen 5 heatsink, reinforced PCI-Express 5.0 x16 slot, premium Wi-Fi 7 and onboard audio solutions, and USB4. Sapphire is expected to showcase this along with example builds at CES next week.
Source: VideoCardz
Add your own comment

27 Comments on Sapphire Intros NITRO+ Phantom Link Radeon RX 9070 XT and X870E Socket AM5 Motherboard

#1
Hereticbar
Here are some better quality and higher resolution pictures of the Sapphire Nitro+ X870E motherboard, the pictures are taken from PConline's review. They took a very detailed look at both the motherboard and the matching Nitro+ RX 9070 XT Phantomlink graphics card. You can check out the article from the link below.

Source: Link







Posted on Reply
#2
Wolfbyte
Beautiful, but I'm owner of Pulse, not Nitro. Also. ALC897 only?
Posted on Reply
#3
Chaitanya
Instead of that fire hazard would have prefered to have 8 pin pcie connectors.
Posted on Reply
#4
Chrispy_
HereticbarHere are some better quality and higher resolution pictures of the Sapphire Nitro+ X870E motherboard, the pictures are taken from PConline's review.
A backplate on a motherboard has to be one of the most irritating and wasteful uses of budget. All it does is drive up the cost of the product and trap VRM heat.

I was hoping Sapphire was going to be the clean, sensible OEM that didn't fall for all the dumb gimmicks and flagship-chasing halo nonsense but it appears those whales are extremely profitable easy targets that Sapphire want a slice of too. The entire idea of X870E is stupid. All of those extra PCIe lanes, USB ports, networking, M.2 slots? EVERY SINGLE ONE OF THEM is fighting for four puny lanes between the chipset and the CPU. The more ports, slots, and features a manufacturer adds to their high-end boards, the more ridiculous it becomes given the same 4-lane bottleneck between the CPU and the vast mountain of connectivity hanging off those two chipsets....
Posted on Reply
#5
jesdals
Im glad to see these products from Saoohire because they used to make sweet motherboards - buts something is off with haveing the Phantom Link on a board where all the other connectors are on the fron e.g. the 24pin motherboard etc.. That just make no sense?
Posted on Reply
#6
Philaphlous
Chrispy_A backplate on a motherboard has to be one of the most irritating and wasteful uses of budget. All it does is drive up the cost of the product and trap VRM heat.

I was hoping Sapphire was going to be the clean, sensible OEM that didn't fall for all the dumb gimmicks and flagship-chasing halo nonsense but it appears those whales are extremely profitable easy targets that Sapphire want a slice of too. The entire idea of X870E is stupid. All of those extra PCIe lanes, USB ports, networking, M.2 slots? EVERY SINGLE ONE OF THEM is fighting for four puny lanes between the chipset and the CPU. The more ports, slots, and features a manufacturer adds to their high-end boards, the more ridiculous it becomes given the same 4-lane bottleneck between the CPU and the vast mountain of connectivity hanging off those two chipsets....
I was literally just going to say this...I think all these covers look "nice" but in reality do not provide any benefit to airflow and in-fact trap stagnant air...
Posted on Reply
#7
_roman_
Why am I more intrested in where to buy to get that monkey figure at the boring aio and boring motherboard? I wondered who that figurine was.

Someone please translate this please:
There is a 600 W-capable 12V-2x6 input located next to the 24-pin ATX, which simply routes power to the GC-HPWR slot.
So the benefit is to use a shorter cable from moterhboard to the graphic card 12V something fail connector? Or does it something else?

Those covers prevent usage of NVME which come with dedicated passive or active coolers.
Posted on Reply
#8
Unregistered
I feel that 12V-2x6 connector only makes sense if they were to have a back-connect "Project Zero" motherboard design, disappointing that they didn't angle the connector though same with the 24pin.
Posted on Edit | Reply
#9
Darmok N Jalad
I like the concept, but I don’t know if having the GPU connector at a 90 degree angle changes a whole lot. Seems like having the connector parallel to the motherboard would cut down on the cable and connector strain.

I know it’s been beaten to death, but my latest PSU came with a 12v-2x6 cable, so it’s the first time I’ve seen it first hand. I must say, the connector feels too small for such a large bundle of cables. I can see why people would have issues getting a good connection without needing to bend the cable to get the case’s side panel installed. Just seems like a bad design for the application.
Posted on Reply
#10
crashbug916
These look great! But they should have made these back connect instead! Hope that's in the future, otherwise no real benefit if the connector is still plugging in the front side anyway.
Posted on Reply
#11
TheinsanegamerN
ChaitanyaInstead of that fire hazard would have prefered to have 8 pin pcie connectors.
Still waiting on proof that the 12v2 connector burns up at a higher rate then 8 pins did.
Posted on Reply
#12
RejZoR
WolfbyteBeautiful, but I'm owner of Pulse, not Nitro. Also. ALC897 only?
It's so wild how EVERYONE is cheapening on audio on all the boards these days. Literally the ONLY one who wasn't cheapening out on them was AsRock which most, including me avoided for AMD because of issues with burned out CPUs that only they had issues with. And worst is that many budget boards several years ago had ALC4000 series codecs from Realtek which is pretty high end for onboard. And now everyone stuffs shitty ALC897 on their boards, even those for 250€ and more. Like, sure, it will output audio, but the way we've been regressing with audio through the years is just wild. From Windows killing of actually hardware accelerated audio to onboard codecs just getting worse and worse. It's just so weird.
Posted on Reply
#13
freeagent
TheinsanegamerNStill waiting on proof that the 12v2 connector burns up at a higher rate then 8 pins did.
I'm still waiting for mine to go up.
Posted on Reply
#14
Hecate91
Nice looking board, but I'm also disappointed to see companies cheaping out on the audio, it can't cost that much more to use ALC1220.

The Phantomlink connector sounds nice, but all it does is move the failure prone 12v2x6 to the motherboard, where Sapphire should've used molex 8 pin instead. Defend the connector all you want however it burns more than 8 pins did. And now with this trend you'd be out of a whole PC instead of just the GPU connector melting.
Posted on Reply
#15
Unregistered
No idea why they chose to use the ancient ALC897
RejZoRmany budget boards several years ago had ALC4000 series codecs from Realtek which is pretty high end for onboard.
The ALC40XX is a flat out downgrade to the ALC1220 though because it uses a USB interface and has many firmware problems that the later does not have and was one of the main reasons I went with my Aorus board.
Posted on Edit | Reply
#16
Hereticbar
_roman_So the benefit is to use a shorter cable from moterhboard to the graphic card 12V something fail connector? Or does it something else?

Those covers prevent usage of NVME which come with dedicated passive or active coolers.
No, as mentioned in the article the connector is there for you to plug in the 12V-2x6 cable from the power supply to provide power to the graphics card through the PhantomLink connector.
Hecate91Nice looking board, but I'm also disappointed to see companies cheaping out on the audio, it can't cost that much more to use ALC1220.

The Phantomlink connector sounds nice, but all it does is move the failure prone 12v2x6 to the motherboard, where Sapphire should've used molex 8 pin instead. Defend the connector all you want however it burns more than 8 pins did. And now with this trend you'd be out of a whole PC instead of just the GPU connector melting.
Sure is disappointing. Currently the motherboard is listed at around $350 on JD.com, it could certainly do with a better audio codec.

And given how all the graphics cards that has the GC-HPWR (PhantomLink) connector are either from Nvidia or one of the rare AMD graphics card with a 12V-2x6 connector, it makes makes perfect sense. I think space constraint could also be another reason why. Taking a look at the motherboard, I am not sure if there is even enough room on the motherboard to fit 3-4 PCIe power connectors which will be needed to provide up to 600w of power to the graphics card.
Posted on Reply
#17
Auxityne
ShadowizedNo idea why they chose to use the ancient ALC897

The ALC40XX is a flat out downgrade to the ALC1220 though because it uses a USB interface and has many firmware problems that the later does not have and was one of the main reasons I went with my Aorus board.
MSI does this too, plopping the ALC897 on their low-end X870E boards. I know most people don't care about audio, and those who do either have an internal sound card or, more likely, a USB DAC like I finally got, but is the ALC1220 that much more expensive? Each time I see the 897, I have to ask what else the company cheaped out on.
Posted on Reply
#18
_roman_
Sound belong to USB. So many usb headsets have anyway the audio in the usb plug because it has to be that way. I have an usb audio interface with nice dials. Asus has nice external usb audio and usb hub device on very expensive motherboards. motherboard audio has to go, sata has to go, motherboard price can be cheaper. 0.02€ SMD Button for CMOS reset have to be on any motherboard.
Most monitors have a 3.5mm Klinke Headphone and Microphone connector. The signal comes from HDMI or DP. There is no real need for a sound card anymore. When you want optical or quality get a proper plug in sound card. Using the monitor audio connectors imply the cables are much shorter and the cables are near the user anyway as most screens are near the end user. The end of the computer case is not always near the user.

A sound bar for Television can be used as a sound device wiht windows 10 and hdmi and a nvidia 16xx desktop card.
Posted on Reply
#19
Unregistered
AuxityneMSI does this too, plopping the ALC897 on their low-end X870E boards. I know most people don't care about audio, and those who do either have an internal sound card or, more likely, a USB DAC like I finally got, but is the ALC1220 that much more expensive? Each time I see the 897, I have to ask what else the company cheaped out on.
yeah, when I was looking to buy an X870E board I was very close to considering MSI until I noticed that not a single one had an ALC1220 I instantly stopped considering them. It's so strange it goes from the old ALC897 to the garbage ALC4080. I think it's only Gigabyte and some of the Asus boards that offer the ALC1220.
Posted on Edit | Reply
#20
Gucky
Haha with how tight they bent the 12VHPWR, they seem to be against the recommendation of PSU manufactorers...
Posted on Reply
#21
RejZoR
ShadowizedNo idea why they chose to use the ancient ALC897

The ALC40XX is a flat out downgrade to the ALC1220 though because it uses a USB interface and has many firmware problems that the later does not have and was one of the main reasons I went with my Aorus board.
I never understood the USB interface for internal onboard audio. Must be cheaper and easier to integrate with other bus interconnects on board than using dedicated audio bus or something.
Posted on Reply
#22
Aleksandar_038
It is cheaper to out bunch of plastic shrouds, or metal shrouds and RGB than proper audio codec.

So today even 300 $ boards have ALC897, and couple of years ago, it was reserved for low ens boards only...

State of PC market is very, very sad...
Posted on Reply
#23
Hecate91
I assume a decent audio codec requires extra PCB traces and layers for audio isolation, so we either get the old ALC897, or ALC4080 over USB.
Or maybe someone has a whole warehouse full of ALC897 chips.
It's sad as we used to have midrange motherboards with the ALC1220 codec, replaceable op-amps, some even had a headphone amp.
Posted on Reply
#24
CosmicWanderer
Very happy with Sapphire going down this route.

Hopefully they keep at it when I'm ready to upgrade to Zen 7 and R/UDNA 5.
Posted on Reply
#25
Chrispy_
GuckyHaha with how tight they bent the 12VHPWR, they seem to be against the recommendation of PSU manufactorers...
LOL, I missed that.


I ignore these boards that add GPU power via a slot, they're cosmetic nonsense that just add cost and an additional two sets of contacts in this case. It doesn't solve the 12V6X2 issues at all, you still have to use that stupid connector - now it's just on the board, and in an even dumber place WRT bend radius!

ASUS' design with a BTF motherboard doesn't help either, it forces a tight radius in more cases because of the clearance to the side panel. At least when it's on the front of the board as pictured here you can choose to have a big ugly loop of cable to reduce the tightness of the bend. At that point, though, it completely defeats the purpose of this cosmetic-only nonsense anyway. A self-defeating solution to a problem that shouldn't even exist in the first place is hardly worth my consideration, outside of the fun I have mocking it for how stupid it is.
Posted on Reply
Add your own comment
Nov 19th, 2026 16:36 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts