Friday, January 16th 2026

ASUS Revises PCIe Q-Release Design Yet Again, Claims "Users Were Confused" By Buttonless Mechanism

When it first launched the Q-Release Slim PCIe mechanisms on its high-end gaming X870 Gaming motherboards, the new connector ended up causing scratches on the PCIe contacts of GPUs after repeated insertion and removal cycles. The connector was later quietly revised in March 2025 to remove the metal bracket that was blamed for the scratched contacts. Now, ASUS has once again revised the Q-Release Slim PCIe mechanism design for the latest Neo series motherboards, once again requiring a button to release PCIe cards from the motherboard.

In a video previewing the updated 2026 motherboard line-up, ASUS North America explains that the Q-Release mechanism was revised because "some users were confused" by the connector, which didn't require any intervention beyond pulling the GPU out of the slot to remove it, while others simply wanted a button to be present—likely those who had heard about the aforementioned scratched PCIe connectors and didn't want the added risk. The new motherboard PCIe retention mechanism will be present on all of the new NEO motherboards ASUS announced for 2026, which includes more affordable gaming motherboards, like the ASUS TUF Gaming B850-Pro WiFi7 Neo and the creator-focused ProArt B850-Creator WiFi Neo and goes all the way up to the premium ROG Crosshair X870E Glacial motherboard.
The full list of ASUS Neo motherboards with the revised Q-Release PCIE mechanism reads as follows:
  • ROG Crosshair X870E Glacial
  • ROG Crosshair X870E Dark Hero
  • ROG Strix X870E-E Gaming WiFi7 NEO
  • ROG Strix X870E-A Gaming WiFi7 NEO
  • TUF Gaming X870-Pro WiFi7 W NEO
  • ROG Strix B850-F Gaming WiFi7 NEO
  • ROG Strix B850-A Gaming WiFi7 NEO
  • TUF Gaming B850-PRO WiFi7 W NEO
  • ProArt B850-Creator WiFi NEO
Sources: ASUS North America, via UNIKO's Hardware on X
Add your own comment

14 Comments on ASUS Revises PCIe Q-Release Design Yet Again, Claims "Users Were Confused" By Buttonless Mechanism

#1
Solaris17
Super Dainty Moderator
I know it’s fun to hate on ASUS but I have met some really stupid people so I don’t doubt it.
Posted on Reply
#2
wNotyarD
Cpt.JankNow, ASUS has once again revised the Q-Release Slim PCIe mechanism design for the latest Neo series motherboards, once again requiring a button to release PCIe cards from the motherboard.
So it became just Q-Release again?
Posted on Reply
#3
Dragokar
Solaris17I know it’s fun to hate on ASUS but I have met some really stupid people so I don’t doubt it.
There was nothing to be confused about, they clearly screwed up one version of the mechanism and therefore revised it. Nothing bad about it, but big companies rarely don't admit such things.
Posted on Reply
#4
TheinsanegamerN
DragokarThere was nothing to be confused about, they clearly screwed up one version of the mechanism and therefore revised it. Nothing bad about it, but big companies rarely don't admit such things.
There was nothing wrong with the original mechanism, but there are a lot of illiterate people out there that cannot handle anything that deviates from the expected.
Posted on Reply
#5
Hecate91
Asus obviously screwed up since their own design was causing scratches, users shouldn't have to remove the GPU in a different way than a standard pci-e release latch, as I recall Asus blamed it on users before.

And if there was nothing wrong with their latch then Asus wouldn't bother spending money to revise it again.
Posted on Reply
#6
_roman_
That phrasing is offensive when a company blames the user "confused". implying the user has a mind illness. I do not want to buy anything from a company which does not respects its customers.

The repeatedly paying customer is always right and should be respected.

ASUS in short: Fire that guy in the video, better yesterday than tomorrow.



Always check, who said it, did he said it, etc.
Speaks too hastily. Uses bad audio equpiment, bad audio tools, etc. Does not respect the customers.

--

Never blame the design, never blame the lack of documentation, never blame the company. Always blame the customer.

I used for more than 2 years Asus prime x670-P motherboard. I saw the lack of firmware updates and bugs. I own a asus proart pa278QV monitor for 350€ which developed after 3 years a permanent green dot. I had asus android tablet. ASUS is lower quality brand for certain components. ASUS is not MSI or EIZO for certain products. asus motherboard, 5 or 6 weeks with public known picture uefi bug which made my encryption useless and no downloadble firmware for the motherboard. delayed updates, etc. MSI x670e gaming plus wifi clocks much better for cpu and dram with less euro to pay for the motherboard.
Posted on Reply
#7
zenlessyank
I despise the PCIe latch no matter the design. It is impossible to activate them with a giant 2 slot video card installed, Sure they pop in easy but when it is time to pull it out, good luck without using a butter knife or Popsicle stick.

Never met an ISA or AGP or PCI slot with one and never had any problems with those slots. IF you can't get your video card to stay put then use a desktop style case so the card isn't hanging sideways!

I remove those things usually. Asus & all manufacturers should do the same. The spec is stupid.
Posted on Reply
#8
Chaitanya
Shitsus taking cues from Apple and blaming the customer.
Posted on Reply
#9
Dragokar
TheinsanegamerNThere was nothing wrong with the original mechanism, but there are a lot of illiterate people out there that cannot handle anything that deviates from the expected.
Well that's how you see it, first iteration was crap imo and yes I remove a lot of cards and don't like them get scratched inside the PCIe slot.
Posted on Reply
#10
freeagent
I have the original, no problems, no scratches.

Just people on the internet that think they know how to use something when they really don't.

But man, is it ever fun to bash a brand. I have a few that I enjoy bashing :cool:
Posted on Reply
#11
ZeDestructor
zenlessyankI despise the PCIe latch no matter the design. It is impossible to activate them with a giant 2 slot video card installed, Sure they pop in easy but when it is time to pull it out, good luck without using a butter knife or Popsicle stick.

Never met an ISA or AGP or PCI slot with one and never had any problems with those slots. IF you can't get your video card to stay put then use a desktop style case so the card isn't hanging sideways!

I remove those things usually. Asus & all manufacturers should do the same. The spec is stupid.
Same. The only one I don't mind (ironically enough) is the one in my X670E-CREATOR from Asus, where I press a button that's near the memory slots to unlatch the card. Asus IMO should just bring back the button, but this time extend it to all PCIe ×16 physical slots rather than just the top one.
Posted on Reply
#12
Unregistered
zenlessyankSure they pop in easy but when it is time to pull it out, good luck without using a butter knife or Popsicle stick.
1000X this. When I switched to an AIO I was happier that I no longer had to put up with my NH-D15s blocking that stupid latch than I was with the improved cooling. At least on my current Gigabyte board there is a quick-release button to the far side near the RAM.
#13
Vayra86
TheinsanegamerNThere was nothing wrong with the original mechanism, but there are a lot of illiterate people out there that cannot handle anything that deviates from the expected.
There is nothing wrong with 12VHPWR, people have to just insert it right. Never mind the fact it was revised either and damage was caused in early use cases already, its probably your fault anyway.

Have a nice day and please enjoy your cup of nonsense.
freeagentI have the original, no problems, no scratches.

Just people on the internet that think they know how to use something when they really don't.

But man, is it ever fun to bash a brand. I have a few that I enjoy bashing :cool:
Well, you could also say that Asus fudged their reimagining of how a GPU should be seated badly and basically just created a bunch of E waste only to get forced to revised it, and still end up with a design that is poorly received.

They could have also not done a thing and nobody would have given a rats ass.

I'm not bashing here, I'm just amazed at the pointlessness of it all.
Solaris17I know it’s fun to hate on ASUS but I have met some really stupid people so I don’t doubt it.
Stupidity is no requirement. A healthy amount of alcohol, lack of sleep or regular spasms can do the trick too. Unironically most things are served best by not changing them, so people automate how they work and just don't do it any other way. I can do a lot of those things even when drunk, *hic* I'll even do them betterer!
Posted on Reply
#14
Space Lynx
Astronaut
I always read the manual of my expensive products (that includes motherboards), so yeah either way is fine with me.

I hope for Zen 7 CPU's new platform in a few years that motherboards change a lot. I am very interested in ASUS cableless power gpu designs and this q-release stuff, it will be nice. Also, maybe they can finally standardize those tiny PC case cables that have to attach to motherboards, it would be nice indeed. I hate those little things, plugging them in is a nightmare.
Posted on Reply
Add your own comment
Nov 22nd, 2026 16:11 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts