Tuesday, June 2nd 2026

Noctua Shows Off NT-CP1 Carbon Nanotube Thermal Pad Developed by Carbice, Prototype SFF AM5 Cooler

Noctua in its 2026 Computex booth showed off the NT-CP1, a carbon nanotube-based thermal pad invented and manufactured by Carbice, which the latter sells as the Carbice IP90 Nanopad. These thermal pads provide a superior alternative to thermal pastes, and offer practically infinite service life. Carbice and Noctua have formed a strategic partnership to bring vertically-aligned carbon nanotube thermal pads to the DIY PC market. Unlike traditional thermal pastes that degrade, Carbice pads improve over time, ensuring long-term, maintenance-free cooling. Noctua will exclusively distribute these pads, starting with an AMD Ryzen version in September 2026. Noctua also extensively tested the the IP90 on its cooling solutions, and posted its own performance figures.

The company also showed off its prototype small form-factor top-flow CPU cooler for AMD Socket AM5. A variation on the NH-L12 series, the cooler is 70 mm in height, including its fan. It has a tailored layout for most Mini-ITX Socket AM5 motherboards, and uses six 6 mm-thick copper heat pipes to dissipate heat through a dense aluminium fin-stack. The cooler includes an NF-A12x25 G2 120 mm. It offers 35 mm of RAM height clearance for a wide range of memory modules. Noctua is planning to launch this cooler around this time next year.
Add your own comment

13 Comments on Noctua Shows Off NT-CP1 Carbon Nanotube Thermal Pad Developed by Carbice, Prototype SFF AM5 Cooler

#1
081x
Cool thermal pad tech, I would be curious to see what it's like to remove it from the IHS, I hope it doesn't have problems with sticking if it conforms perfectly.
Posted on Reply
#2
RH92
They show NT-CP1 freshly applied performing much worse than NT-H1 ( which itself is far from being the best performing paste ) and requiring about 3500 thermal cycles to equal NT-H1. Notice that they don't specify the usage time a thermal cycle is supposed to represents. Noctua themselves claim that NT-H1 has exceptional longevity and they recommend 5yrs of usage time.

So it would take NT-CP1 several years of usage to even start making sense ? Pure waste of money unless of course for some reason you can't re paste your PC every 5yrs or something , which is comical since even if you don't want to deal with that you will have to deal with dust accumulation if you don't take care of it for such long period ....
Posted on Reply
#3
Mrgravia
70mm is an interesting target, but an iffy one considering most would go for 67mm or 77 mm depending on the case.

I suppose you could fan swap it for 60mm, but that's an added expense.
Posted on Reply
#4
RH92
081xCool thermal pad tech, I would be curious to see what it's like to remove it from the IHS, I hope it doesn't have problems with sticking if it conforms perfectly.
Not sure 6.5 deg C higher temp compared to an average paste qualifies as ''Cool'' :roll:
Posted on Reply
#5
081x
RH92Not sure 6.5 deg C higher temp compared to an average paste qualifies as ''Cool'' :roll:
I'll certainly take long run performance on account of being lazy about changing my thermal paste. Seems like pretty fascinating tech to me and not having crusty dry bits in my machine seems like a win.
Posted on Reply
#6
RH92
081xI'll certainly take long run performance on account of being lazy about changing my thermal paste. Seems like pretty fascinating tech to me and not having crusty dry bits in my machine seems like a win.
I mean there is lazy and LAZY , so depends how you define it. Regardless of paste longevity you will have at some point to deal with dust accumulation so might aswell apply fresh paste and enjoy much better cooling / acoustic perf compared to what the carbon pads offer, probably for much cheaper too .
Posted on Reply
#7
Jtuck9
081xI'll certainly take long run performance on account of being lazy about changing my thermal paste. Seems like pretty fascinating tech to me and not having crusty dry bits in my machine seems like a win.
There's a reason they include AM5 paste guards. Perhaps this thermal pad will end up suffering the same twisted fate (literally) as mine, and I with a form of Nano-Asbestosis.
Posted on Reply
#8
081x
RH92I mean there is lazy and LAZY , so depends how you define it. Regardless of paste longevity you will have at some point to deal with dust accumulation so might aswell apply fresh paste and enjoy much better cooling than what the carbon pads offer .
I reckon I just have no problem with being patient in that case. One less thing to worry about when doing system maintenance.
Posted on Reply
#9
ymdhis
Low profile coolers has been an area where Noctua had very weak products, so this is welcome. It looks like it will have 6 heatpipes, so I suspect its main competitor will be the Thermalright AXP120, expect that one is 67mm with a 15mm fan, this is 70mm with a 25mm fan, so it should perform better out of the box and if that extra 3mm is too much you can put a 15mm fan on it.

I just hope they price it well because right now you can get the AXP120 for $33, plus another $35 for an A12x25 G2 fan upgrade. So this cooler needs to be less than $70 to be worth it. The current NH-L12, which is much worse (15mm fan UNDER the heatsink), is $75...
Posted on Reply
#10
Philaphlous
I'd love to give this a try on my direct die 9700x!
Posted on Reply
#11
TristanX76
After real benchmarks will tell whether it is worth it or not. Knowing Noctua these days, very likely it will be criminally overpriced.
Posted on Reply
#12
Intelko
This asbestos-like with airborne nanotube particles thermal pad is very fancy and everything (I guess you don't need to worry about the lung cancer, because it's already included in the pad itself), but the question remains the same:
How much is its thermal conductivity?
Does this pad beat at least the ordinary PTM7xxx?

P.S:
At least this asbestos-like material based on airborne volatile carbon nanotubes doesn’t seem to suffer from performance degradation over time.
RH92Not sure 6.5 deg C higher temp compared to an average paste qualifies as ''Cool'' :roll:
I would really like to compare Carbice asbestos like pad with PCMA2305+
Posted on Reply
#13
kikimaru024
ymdhisLow profile coolers has been an area where Noctua had very weak products, so this is welcome. It looks like it will have 6 heatpipes, so I suspect its main competitor will be the Thermalright AXP120, expect that one is 67mm with a 15mm fan, this is 70mm with a 25mm fan, so it should perform better out of the box and if that extra 3mm is too much you can put a 15mm fan on it.

I just hope they price it well because right now you can get the AXP120 for $33, plus another $35 for an A12x25 G2 fan upgrade. So this cooler needs to be less than $70 to be worth it. The current NH-L12, which is much worse (15mm fan UNDER the heatsink), is $75...
According to ComputerBase, Noctua is targeting performance to be the same as NH-L12Sx77
Posted on Reply
Add your own comment
Nov 16th, 2026 03:28 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts