Friday, May 1st 2026
Noctua Explains Why chromax.black Fan Releases Take So Long
Austrian fan maker Noctua has published a technical blog explaining why it sometimes takes a long time for the company to release the dark-edition chromax.black fans after the initial beige and brown design is out. The company compares the level of engineering required for a new color code to painting a Formula 1 car, rather than a simple color change like you would typically do with a wooden fence. Noctua is known for its scientific testing, rigorous performance evaluations, highly detailed lab experiments, and more, which make its fans worthwhile. This has created a massive fan base within the enthusiast community over the years, who now eagerly await each new product release. When it comes to manufacturing, the company applies that same rigor everywhere, and a simple color change is not taken lightly. For example, Noctua produces its fans using injection molding, where plastic is melted and forced into a steel mold. However, when a new pigment is used, the entire calculation can be disrupted.
Noctua designs its fans with high precision to maximize airflow performance. This means that blade impellers have a tip clearance before hitting the fan frame of only a few tenths of a millimeter, about 0.5 mm for 120 mm fans and about 0.7 mm for 140 mm fans. Introducing any third-party pigment into this process could disrupt the structure of this fan tip clearance and potentially interfere with Noctua's Sterrox liquid-crystal polymer (LCP) material used in its fans. Specifically, color pigments have particles that directly affect how the injection mold behaves, as they carry their own particle imperfections. This negatively impacts the hundreds of thousands of performance tests that Noctua conducts in the lab and significantly delays the chromax.black product launch.For example, Noctua is now preparing to launch the chromax.black version of its NF-A12x25 G2 fan about 10 months after the initial version. However, readers may recall that it took Noctua three years after the first-generation NF-A12x25 launch, as the company was dealing with the challenges of pandemic-induced material shortages and logistical nightmares. These days, the situation is much better, but the engineering challenges remain.
Source:
Noctua
Noctua designs its fans with high precision to maximize airflow performance. This means that blade impellers have a tip clearance before hitting the fan frame of only a few tenths of a millimeter, about 0.5 mm for 120 mm fans and about 0.7 mm for 140 mm fans. Introducing any third-party pigment into this process could disrupt the structure of this fan tip clearance and potentially interfere with Noctua's Sterrox liquid-crystal polymer (LCP) material used in its fans. Specifically, color pigments have particles that directly affect how the injection mold behaves, as they carry their own particle imperfections. This negatively impacts the hundreds of thousands of performance tests that Noctua conducts in the lab and significantly delays the chromax.black product launch.For example, Noctua is now preparing to launch the chromax.black version of its NF-A12x25 G2 fan about 10 months after the initial version. However, readers may recall that it took Noctua three years after the first-generation NF-A12x25 launch, as the company was dealing with the challenges of pandemic-induced material shortages and logistical nightmares. These days, the situation is much better, but the engineering challenges remain.



73 Comments on Noctua Explains Why chromax.black Fan Releases Take So Long
Only time I really owned something Noctua were Chromax Black 92mm fans that I fitted on my RTX 3080 using my custom design 3D printed retention frame. This did work really well and they were super quiet compared to crappy thin factory fans. At least something I guess :D
Now that's a way to justify 25 eur price tag for a damn 120mm fan.
I mean you can buy 5-pack of Arctic fans that support zero rpm mode for that price and they will do just fine (have had them for 8 years and none Arctic fan failed so far, though older models tended to do clicking sounds when rpms raised swiftly).
Vote with your wallet, I guess.
And anyway, switch from vomit brown is appreciated. This color was ruining all-white and all-black builds.
They'll get my money until the day I die or go broke, probably from buying so many fans.
They usually start spinning around 11%
the lack of german language customer support made me return the 90€ fans. i would not call notcua an austrian company, as an austrian resident with the provided invoice and statement on the noctuan homepage in year 2025.
this is the typical noctua marketing message. I pay close attention to these recently. noctua give such statements every few months as free marketing and than will not make any progress or provide any new products. the media of course loves such filler news pieces. you can be sure most likely we will see the same statement repeated after a few months with a similar product.
noctua has technical difficulties with batch(the term for colour) in injection molding. 1 vs 1 the same message that noctua is unable to speed up their technology.
a 0.7mm or 700um gap for a 140mm fan is quite large. i think this message is so far the 4th noctua we can not do different colour product which i remember in the past few months.
read...
As such changing color requires rigorous testing to ensure that every parameter of the fan (airflow, static pressure, noise, vibration etc.) is maintained even though the new color has slightly different chemical composition and thus mechanical properties.
Apparently it takes a long time for Noctua engineers to study and understand the mysterious nature of the illusive black colored plastic.
I think they’ve lost the plot recently.
My main issue with air coolers, no matter how good it is, it's INSTANTLY saturated. Like, the moment you put load on CPU it will max out the cooling capacity. Where AiO, with the thermal mass of a water, it usually takes several minutes to even get actually warm. Not to mention you can offset the massive radiator somewhere else in the case where air cooler will always be this massive hunk of fins in the middle of the case.
And the "muh failure points" isn't about the fact that AIOs don't last long.
When a liquid cooler fails, best case it becomes paper weight until replaced (or fitted replacement parts and reassembled) and you got nothing on the system until then (well, unless you have a spare cooler, like the cpu box cooler). Worst case, it violently leaks and kills the entire system.
But when an air cooler fails, it's only the fan that stops, you might even not notice because the heatsink still acts as a passive block. and fixing it requires putting in a spare fan, maybe one of your case fans, for a total of 5-10 minutes of downtime and a reboot; you won't even lose much performance unless your replacement fan is significantly poorer. But even then, you have minimal downtime and near zero potential for hardware damage.
When you buy a Noctua cooler, you best bet that it'll be used for decades to come. That's a guarantee that simply doesn't exist for liquid coolers and never will.
As for of over-saturating, You buy the cooler that fits the CPU. There are a few CPU's that will saturate a CPU no matter what, like the 13900k & 14900k, but pretty much all modern CPU's, including the 9950X can be adequately cooled by large air coolers, and the 7800X3D & 9800X3D are easily cooled by air coolers.
So I personally don't understand AIO's. They only have 3 advantages: Aesthetics, if you have a CPU that cannot be cooled by water, and the minor advantage of being direct exaust mounting(which, in a good case, doesn't matter).
Sorry, can't help but think of this.