Monday, August 10th 2026

Noctua Reveals Inaccuracies in PC Case Cooler Height Specifications

Noctua produces a range of cooling solutions, from low-profile air coolers and massive dual-tower air coolers to AIO liquid coolers. When fitting a large tower air cooler inside a case, PC case manufacturers list the maximum cooler height their chassis can accommodate. Recent testing by Noctua has revealed that more than half of the tested cases deviate from their original specifications. The room for error varies from being 3.5 mm less than the specified CPU cooler height to providing up to an extra 10 mm of cooler height. After testing over 100 cases, Noctua found that around 56 cases deviate from the manufacturer-provided specifications, mostly offering more space than advertised.

This is good news for case buyers, as there can be up to 10 mm more room for a CPU cooler. However, some cases are advertised with more space than they actually provide. For example, the ASUS Prime AP201 case claims to have 170 mm of CPU cooler headroom, but real-world measurements show it to be 168.3 mm. This means that when using the Noctua NH-D15 G2 dual-tower cooler, there's no way to increase RAM clearance by moving the front fan, necessitating the use of RAM kits that are only 32 mm tall. Anything taller will interfere with the CPU cooler. Another example is the Lian Li B4-mATX, which measured at 164.5 mm instead of the advertised 168 mm, making the NH-D15 G2 incompatible with this case.
On Noctua's website, the case compatibility database includes a small field indicating which cases have been tested by Noctua. As the company expands its testing, we can expect to see more entries in the database. As long as cases continue to offer more CPU cooler headroom, such as Corsair's 5000D, 4000D, and Frame 4000D with up to 10 mm more space, or the Thermaltake TR100 with an additional 2.7 mm, any extra space is a positive development.
Source: Noctua
Add your own comment

13 Comments on Noctua Reveals Inaccuracies in PC Case Cooler Height Specifications

#1
Chaitanya
NZXT and Lian-Li not shocking but Corsair also fudging specs is quite surprising.
Posted on Reply
#2
Nostras
I was actually eyeing the B4 with an assassin 4S so I got a bit concerned. Now apparently I have 0.5mm of clearance...?
Oh Lian Li...
Posted on Reply
#3
rv8000
ChaitanyaNZXT and Lian-Li not shocking but Corsair also fudging specs is quite surprising.
I don’t find that surprising on Corsair’s part tbh, 90% of what they make should be direct to landfill or recycling. In the process of buying every small peripheral company under the sun, they've grown too big and quality of anything has nosedived with astounding speed.
Posted on Reply
#4
KrazyT
We know now why Noctua's products are expensive !
They're testing case :)
(but at least, it's useful !)
Posted on Reply
#5
aktpu
TheDeeGeeMy Lian-Li O11D Evo XL has more space than stated on Lian-Li's website.

It states there is 167mm of space and the D15S would be 165mm with the covers installed, but i can fit my pinky in between the cover and glass, which means i have more than 3mm of space.

It would also mean the D15 which is advertised as 168mm wil fit just fine.
How many football fields is your pinky?
Posted on Reply
#6
TheDeeGee
The allowed cooler height for my Lian-Li O11 Dynamic Evo XL is also quite a bit more than the 167mm stated on Lian-Li's website.

I have the NH-D15S installed with heatsink covers, which makes the cooler 164mm, and i have 8mm of space left in between the glass and the cover.

This would mean 172mm of space, which also means the NH-D15 G2 (168mm) would fit just fine since there will be 4mm of the clearance between the heatpipes and glass.
Posted on Reply
#7
Josh-corsair
ChaitanyaNZXT and Lian-Li not shocking but Corsair also fudging specs is quite surprising.
Hi there - Corsair generally is pretty conservative when it comes to certain specifications for clearance since we'd rather error on the side of caution. For example, some big air coolers may not include the height required for the fan mount clips or other items, so we might communicate a 170mm spec to ensure clearance even though there's more like 180mm of clearance as Noctua noted in its writeup.
Posted on Reply
#8
_roman_
Corsair did not impress me wiht the lack of Firmware updates for the corsair mp 600 pro, windows only tool. The recent addition of corsair 4000d ARGB Case did show several flaws. Corsair seems to have Razer quality, medium to low.

having some extra tolerances is something positive
Noctua found that around 56 cases deviate from the manufacturer-provided specifications, mostly offering more space than advertised.
DRAM and a cpu tower cooler are a very old topic.
Posted on Reply
#9
Ihnako
That’s very kind of Noctua, but it’s a bit of a bit of a waste, as there are already various websites where you can find information and, above all, see what it’s actually like in real life and ask questions.
Posted on Reply
#10
_roman_
The point is, Kolink Nocuta, not noctua!!, offers a webpage where you can search for compatibility what i remember from the past. Arctic does something similar. Arctic sells you an aftermarket m2 cooler when something does not fit. amazon.de nocuta shop states it is kolink noctua on the invoice, and not noctua. (just for information, part is austria, part is kolink from taiwan)

-- Today my opinion has changed, the extra space which corsair does not state on the homepage is DIY friendly for those people who are new to the scene or lack building experience.
Arctic AIO, CPU Tower Cooler are kinda difficult to figure out if they fit. Teh case manufacturer do a lazy shit job. The radiator dimensions are not standardised.

I looked several times if i could fit 420 aio in my case. Fractal Design fails on that, as stating 360 one will fit, is not always a fact when others managed to fit in a 420 in the fractal design meshify 2. But you need to move stuff inside around.

It is the case manufacturer job to state the dimensions properly. Corsair 4000D for example is a total fail, as tehy expect you to use a webbrowser for that. Be quient and jonsbo is not better in that regard. Fractal design has a nice paper manual but some aio dimensions are missing.

I do not want to know, whataboutism, how many people are returing 360 and 420mm AIO Coolers because they do not fit the case or the motherboard or the build configuration. Graphic cards are also sometimes quite long which limit your space in the case. HDDs, Power supply units, etc.
Posted on Reply
#11
KLMR
Imagine an european company fact checking chinese manufacturers, what a surprise...
Posted on Reply
#12
dyonoctis
_roman_The point is, Kolink Nocuta, not noctua!!, offers a webpage where you can search for compatibility what i remember from the past. Arctic does something similar. Arctic sells you an aftermarket m2 cooler when something does not fit. amazon.de nocuta shop states it is kolink noctua on the invoice, and not noctua. (just for information, part is austria, part is kolink from taiwan)
You can still just call them Noctua. A lot of businesses that are owned by a mother company will show a different name on the invoice because of how the accounting is structured; the last time that I ordered a Noctua product, it showed Rascom on the invoice. So if we followed your reasoning, we should call them Rascom Kolink Noctua. :D

But Noctua is the brand that consumers are buying and the brand that's being marketed. Noctua is the child of the collaboration between Rascom and Kolink. There's no Noctua without them. That is really all that matters. Yes, there have been cases where brands decided to merge their names (Sony-Ericsson, Fujitsu Siemens), but no rules say that you have to do it. And those brands only did it because their names already carry strong meaning for the general public, so creating a new brand would have been a disadvantage.

Which isn't the case for the very consumer-obscure Rascm and Kolink. Both of those companies are OEMs that provide R&D services in cooling for other businesses. And Noctua is their joint B2C effort.
en.flaxcom.com.tw/list/cate-334055.htm
www.rascom.at/en
Posted on Reply
#13
Tomorrow
ChaitanyaNZXT and Lian-Li not shocking but Corsair also fudging specs is quite surprising.
rv8000I don’t find that surprising on Corsair’s part tbh, 90% of what they make should be direct to landfill or recycling. In the process of buying every small peripheral company under the sun, they've grown too big and quality of anything has nosedived with astounding speed.
Did you even read the article?

Corsair and NZXT both had spare. It was ASUS (surprise surprise) and Lian Li who came up short of their own specs.
IhnakoThat’s very kind of Noctua, but it’s a bit of a bit of a waste, as there are already various websites where you can find information and, above all, see what it’s actually like in real life and ask questions.
We already have these - they're called manufactured provided specs - and they're incorrect half the time.
You think these "various websites" do any kind of by-hand measuring to arrive at their numbers like Noctua?
I doubt it.
Posted on Reply
Add your own comment
Nov 18th, 2026 15:47 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts