Tuesday, June 9th 2026
DeepCool Launches Updated PC Case Fans for Quiet and Tidy Builds at Computex 2026
DeepCool showed off a number of slick new CPU coolers at Computex 2026, which we already covered previously, but some of the company's new fans might be even more interesting to PC builders—especially those looking for silent and clutter-free PC builds. The update to DeepCool's fan line-up sees the brand update its daisy-chain FL12 fans with the INF versions, which now feature ARGB-illuminated infinity mirrors on the edges of the fans that would normally be visible in a daisy-chain setup. The FL12 INF will, like the other fans in the FL12 series, be available in black or white and with both regular and reverse fan blade orientations.
DeepCool has also announced a revised version of the FD12 and FD12 ARGB fans, called the FD12 ARGB V2 and FD12 V2. With the update, DeepCool has redesigned the FD12 fan blades with an integral design that it calls a "closed fan wheel design," which is essentially just a ring that connects the exteriors of all the fan blades. DeepCool says this allows the FD12 V2s to deliver higher airflow, more static pressure, and lower noise, with claims of a 7% increased effective cooling area. The new FD12 ARGB V2 fans feature the same second-generation eight-pin daisy-chain connection, and they have nine ARGB LEDs for color-matching purposes, while the non-RGB FD12 V2s forego both RGB and daisy-chaining in favor of a regular four-pin PWM connector. Like the new FL-series fans, the FD12 V2 fans will be available in both black and white and in forward and reverse configurations.DeepCool is also launching the new FD36 ARGB fan frame, which is three 120 mm fans packed into one frame, with the same nine-ARGB lighting scheme and overall design as the FD12 ARGB V2. The FD36 fans are all PWM controlled, but DeepCool has deliberately designed the fans to run at different speeds to avoid harmonics and vibrations.
Source:
DeepCool
DeepCool has also announced a revised version of the FD12 and FD12 ARGB fans, called the FD12 ARGB V2 and FD12 V2. With the update, DeepCool has redesigned the FD12 fan blades with an integral design that it calls a "closed fan wheel design," which is essentially just a ring that connects the exteriors of all the fan blades. DeepCool says this allows the FD12 V2s to deliver higher airflow, more static pressure, and lower noise, with claims of a 7% increased effective cooling area. The new FD12 ARGB V2 fans feature the same second-generation eight-pin daisy-chain connection, and they have nine ARGB LEDs for color-matching purposes, while the non-RGB FD12 V2s forego both RGB and daisy-chaining in favor of a regular four-pin PWM connector. Like the new FL-series fans, the FD12 V2 fans will be available in both black and white and in forward and reverse configurations.DeepCool is also launching the new FD36 ARGB fan frame, which is three 120 mm fans packed into one frame, with the same nine-ARGB lighting scheme and overall design as the FD12 ARGB V2. The FD36 fans are all PWM controlled, but DeepCool has deliberately designed the fans to run at different speeds to avoid harmonics and vibrations.








6 Comments on DeepCool Launches Updated PC Case Fans for Quiet and Tidy Builds at Computex 2026
For a start, I've never bought one of their case fans - but all of the recent coolers I've bought from them (AK500, AK620, LS720S) have suffered from poor fan balance, distracting enough that I've actually replaced many of the fans with cheap $5 Arctic P12s from multipacks.
So it's good to see them focusing on harmonics and vibrations but it seems to be a problem that they suffer from more than other brands IME.
www.hwcooling.net/en/deepcool-fd12-v2-maximum-airflow-minimal-price-review/
^Seems like it did well in the tests, the ones disappointed by other DeepCool fans might want to check out the review and perhaps give this model a shot.There are other models with this outer ring.
MSI CycloBlade 9:
tpucdn.com/review/msi-mpg-coreliquid-p13-360-aio-cpu-liquid-cooler/images/close7.jpg
Montech HP-H141600-BF older version that was used on the Air 903 cases:
tpucdn.com/review/montech-air-903-max/images/casefront2.jpg
T-Force CF1225H12S has the impeller looking extremely similar to the Montech above:
tpucdn.com/review/team-group-siren-duo360-aio-liquid-cpu-ssd-cooler/images/close9.jpg
And after a bit of trawling through the cooler reviews:
This ASRock trifan:
www.techpowerup.com/review/asrock-phantom-gaming-360-lcd-aio-liquid-cpu-cooler/images/close7.jpg
Sapphire:
www.techpowerup.com/review/sapphire-nitro-s240-a-aio-liquid-cpu-cooler/images/close7.jpg
Cooler Master:
tpucdn.com/review/cooler-master-masterliquid-pl240-flux-aio-liquid-cpu-cooler/images/close7.jpg
The ID-Cooling AT-120-K (hwcooling review) is actually similar to the Montech Metal Pro 12 Silent because both have the ring ahead of the blade tips.
www.techpowerup.com/review/montech-hyperflow-silent-360-aio-liquid-cpu-cooler/images/close7.jpg
I've bought several Deepcool fans, QC has been all over the place, at least 15+ of those fans were so bad I had to replace them.
Other people mention the vibration problem enough to show up all over the web in search results.
@maxfly has mentioned it in this thread.
It's good they're working on the harmonics and vibrations, but they still have plenty of work to do!
To be fair that was at higher rpm.
The last page says this:Yes there is room for further improvement but steps in the right direction have been made.