Sunday, August 30th 2026
NVIDIA Shuts Down RTX 5000 Power Limit Control OC in Latest Driver Update
We recently reported on the open-source overclocking tool, mVolt+, unlocking power limit control on NVIDIA GeForce RTX 5000-series GPUs, allowing certain GPUs, like the RTX 5090, to draw up to 125 W of additional power and enabling significantly higher core clock speeds as a result. With the latest driver update 616.56, however, it seems as though NVIDIA has blocked the core power control functionality.
Based on reports from the Overclock.net forums, via Uniko's Hardware on X, any attempt to input any extra current results in a black screen, reminiscent of a driver crash. Reportedly, a beta build of Hydra 2.3 is still able to access its core power overrides on NVIDIA GPUs, even after the driver update. It's unclear if NVIDIA has intentionally blocked mVolt+ or if it's simply an untested combination of mVolt+ and the new NVIDIA driver causing an incompatibility.
Sources:
Overclock.net, via Uniko's Hardware
Based on reports from the Overclock.net forums, via Uniko's Hardware on X, any attempt to input any extra current results in a black screen, reminiscent of a driver crash. Reportedly, a beta build of Hydra 2.3 is still able to access its core power overrides on NVIDIA GPUs, even after the driver update. It's unclear if NVIDIA has intentionally blocked mVolt+ or if it's simply an untested combination of mVolt+ and the new NVIDIA driver causing an incompatibility.


53 Comments on NVIDIA Shuts Down RTX 5000 Power Limit Control OC in Latest Driver Update
With the melting connector, 125 W + is just an increased risk for faster melting, I guess they know that.
They designed/approved of that underperforming connector even on 500 Watt draw.
But seriously i cannot blame them really.
I thought they wanted their cards back. :laugh:
www.tomshardware.com/pc-components/gpus/modders-solder-power-cables-directly-to-rtx-5090-pcb-to-eliminate-notorious-melting-16-pin-connector-bare-board-galax-hof-card-pulls-600w-under-chiller-cooling
Why didn’t ENvidia just go with triple or quad 8 pins like a sane company? Also, wouldn’t overclocking it and a melting pin not be covered by RMA as you are running it outside of spec?
Edit: 2 news posts fixed
I can kind of understand if they wanted to stop the need for 2 or 3 cables for a gpu, but I cannot understand how a company that designs such advanced silicon and software, can be so incompetent with something as simple as power delivery when it comes to the replacement.... Something that was already well established and reliable before, like you say.
Instead its the PSU companies and the board partners that are trying to find ways to fix the problem. All so nvidia can what? Save face?
Also to have greater thermal density and smaller contacts with less conductivity, it fails sooner, therefore one way or another the user is forced to upgrade sooner -> more profit.A single beefy connector and subsequent cable (say 14AWG wires) would be more difficult to bend and to route.They are but that was never the intent.
Because zero effort was required.
The 8 pin EPS was already invented. Two of those (using 16AWG wires just like the current PCIe and 12V-2x6 cables) can safely supply 600 W.That was some clever manipulation, a trojan horse. They had all the pushers and influencers implant this into the mind of the populace and many fell for it, then they started parroting it to others.
It was so the perception regarding the connector was positive.
When in fact it was never about "solving the cable mess" because the official nVidia and its AIBs recommendation is to use the octopus adapter which keeps the same cable mess, the only difference is the mess doesn't start right at the edge of a GPU with a longer PCB, instead some cm further from the edge of a GPU with a shorter PCB.On the contrary only some very competent but nefarious individuals can come up with such a perfect time bomb connector.
But we already arrived to the point where we need 12VHPWR connectors for the high end cards.
EDIT: PCB space is a good point, but yeah, the current solution is just unacceptable if you ask me.