Wednesday, September 16th 2026

NVIDIA Reportedly Rejected RTX 5090 RMA Over Faded Serial Number

An RTX 5090 Founders Edition owner says NVIDIA turned down a warranty claim because the serial number on the card's metal bracket had faded past the point of being readable. According to a Reddit post on r/NVIDIA from user Willing-Avocado-4830, the card began throwing black screen crashes under heavy load, so the owner returned it to NVIDIA for an RMA. After roughly a month of waiting, NVIDIA reportedly rejected the claim with little explanation, and a follow-up email revealed the reason. The printed serial number was apparently too faded to confirm.

The owner claims to have never removed the bracket, and still has the original box and matching invoice. That raises an obvious question, since the same serial number is printed on the card's modular PCIe connector too, and can reportedly be pulled from Windows using NVIDIA's SMI tool, at least while the GPU still boots. NVIDIA rejecting an RMA simply due to a faded serial number is questionable, to say the least, especially with RTX 5090 stock already scarce and prices well above MSRP. Here's what the faded serial number looks like, according to another Redditor who shared this image.
Unfortunately, it looks like this isn't an isolated case. Other Reddit users have reported similar fading on RTX 5090 and RTX 5080 Founders Edition brackets, with a few facing the same pushback from NVIDIA. One user apparently got their claim approved after sending photos matching the card to its retail packaging, so NVIDIA's handling of this doesn't seem entirely consistent. Older Founders Edition cards reportedly used laser etching, while the RTX 50-series switched to ink printing, which may explain the fading. NVIDIA hasn't commented publicly on this incident.
Source: Reddit
Add your own comment

18 Comments on NVIDIA Reportedly Rejected RTX 5090 RMA Over Faded Serial Number

#1
oxrufiioxo
I wonder if Nvidia told them user error .... :laugh:
Posted on Reply
#3
PowerBuilder
I believe the RTX 5090 Founders Edition needs a cooler that takes up three slots, just like previous models. Since it doesn't use a blower fan to forcibly exhaust hot air, if a builder configures the case in a way that hinders airflow, heat buildup is highly likely to cause thermal throttling or even permanent damage to the GPU under peak loads. The case fans really need to ensure proper exhaust...
Posted on Reply
#4
Chaitanya
This tactic of rejecting RMA/Repair over faded serial numbers isnt particularly new or restricted to one manufacturer.
Posted on Reply
#5
JustBenching
ChaitanyaThis tactic of rejecting RMA/Repair over faded serial numbers isnt particularly new or restricted to one manufacturer.
It isn't, but the problem is the FE cards specifically have their serial number slowly fading away, which is odd. Rejecting a card for fading serial number is normal, but if the fading is due to the material being used from the manafacturer themselves, well, that's a different situation.
Posted on Reply
#6
Chane
They don't print/place the serial on the PCB? That's crazy.
Posted on Reply
#7
_roman_
LOL :) What should you else comment on that.

Low quality brand? Shitty manufacturing process?


In 2006 I would go to the measurement room in the company, and ask them to use the ogp, that is the brand, with different light sources on that metall part to make it readable. that is an optical measurement machine which has different light sources to make stuff readable

L O L ... nvidia does not even have an ogp to read that? I assume it is laser engraved text in a metall bracket

2nd. If there is an invoice wiht name, street etc, and personal id who makes an RMA, and the invoice shows nvidi shitti gpu shitti and i get a nvidia shiti gpu shitti with the rma, i would not deny a customer rma.

when you make stuff, you have database etc what was assembled. do not tell me there is only one section with the serial number.
if so I take next time a newer serial number metall bracket and put it on a out of warranty nvidi shitti gpu shitti and make a valid rma case for a defective nvidi shitti gpu.
DrUsmanSaleemafter sending photos matching the card to its retail packaging
of course, any amd graphic cards i bought in recent years had the serial number usualyl on the invoice and on the cartoon box.
Does every customer keep the original box? like i do? i doubt.
DrUsmanSaleemwhile the RTX 50-series switched to ink printing, which may explain the fading.
So I can use isopropanol, ethanol or something else to wipe the serial number and deny any RMA?
Posted on Reply
#8
lemonadesoda
"Fading" serial numbers is no reason to reject warranty within the warranty period. Deliberately scrubbed, or numbers different to the bios, is a reason. But that's not the case here. Shame on nVidia and their "warranty partners"
Posted on Reply
#10
Krit
zenlessyankDisappearing ink for the win!
The more you pay, the more you win it's a great lesson for the next purchase.
Posted on Reply
#11
Wirko
DrUsmanSaleemthe same serial number is printed on the card's modular PCIe connector too, and can reportedly be pulled from Windows using NVIDIA's SMI tool
If the customer tried to erase the SN on the bracket and somehow print a different one in its place, then send the card back for repair, the repair service absolutely would check whether all three (or more) SNs match.
Posted on Reply
#12
Athena
the card began throwing black screen crashes under heavy load
This makes me wonder if it's actually the card, or the PSU at fault here

As for the RMA rejection, if they got the box, and the receipt, and they match the card, then they shouldn't have rejected it, unless they suspect other kinds of damage to the card that was user error
Posted on Reply
#13
LittleBro
S/n is also located on packaging.
And as it turns out, you can get particular s/n using command line tool.
Posted on Reply
#14
A&P211
I can't see any number on there. I'm not defending Nvidia, but they did say the "truth" of being unreadable.
Posted on Reply
#15
Papusan
This just follow the stupid design decisions for the whole FE series graphics cards for this gen. And this shouldn't come as a huge surprise. It's what it is. "Printed with ink" onto the bracket rather than etched for better durability. GeForce RTX 4090 Founders Edition had its serial number laser-etched onto the metal bracket. That was too expensive to continue with. Yup, it's what it is. Nvidia at it's worst.
Posted on Reply
#16
Hecate91
A card black screen crashing under load could be the 12vhpwr connector has degraded on the card.
Printing the serial number on the card slot in ink is a dumb design decision, these FE cards should have laser engraving on the bracket and on the back of the card, at minimum there should be a serial number sticker not just ink. But i'm not surprised Nvidia denied an RMA though.

Edit- FE cards have a serial number sticker under the metal cover,it makes no sense why they'd deny an RMA.
www.techpowerup.com/review/nvidia-geforce-rtx-5090-founders-edition/5.html
Posted on Reply
#17
jmeistr
Poor little Nvidia can't afford to issue RMAs
Posted on Reply
#18
Shtb
He must buy another one.
Doesn't he know, that the more he buys, the more he saves?
/s

Posted on Reply
Add your own comment
Nov 18th, 2026 18:09 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts