News Posts matching #RTX 50-series

Return to Keyword Browsing

Newegg's RTX 5090 Restock Starts at $6,599, More Than Triple the MSRP

Newegg has restocked some GeForce RTX 5090 variants, but the cheapest RTX 5090 sold directly by Newegg at the time of writing is the GIGABYTE AORUS RTX 5090 Xtreme Waterforce at $6,599.99, about 3.3 times NVIDIA's $1,999 MSRP. The restock includes a handful of ASUS, GIGABYTE, and MSI models as first-party listings that ship from Newegg itself rather than from marketplace sellers. The AORUS Master ICE goes for $6,759.99, while MSI's Gaming Trio OC, Ventus 3X OC, and Suprim Liquid SOC all sit at $6,999.99. An ASUS ROG Astral RTX 5090 OC was reportedly listed for $6,249.99 as well, but it has already sold out. The current ROG Astral RTX 5090 OC listing is at $9,490 instead.

As ridiculous as those prices are, they're actually lower than what the card was going for a few weeks ago. TechSpot's October survey put the cheapest in-stock RTX 5090 in the US at $9,400 at that time, and most models sat comfortably above $11,000. Supply has been tight since early October, when leakers claimed NVIDIA had stopped allocating GB202 silicon to the RTX 5090 in favor of RTX PRO workstation cards, and Micro Center also dropped the card from its catalog shortly after. NVIDIA denied the card was discontinued but admitted supply is constrained. However, an unnamed board partner later said it can't currently order GB202 and GDDR7 as a set, or place backorders like before.

DLSS 5 on Radeon Gets Faster With AMDLSS5 2.0, Up to 64% Performance Uplift

AMDLSS5, a free mod that runs NVIDIA's DLSS 5 Neural Rendering on AMD's Radeon RX 9070 and RX 9070 XT, has reached version 2.0 with an engine its developer, Wehaveall, built for the project. Earlier builds were based on Daniel Blanco's DLSS-NR-on-AMD, the tool that first got DLSS 5 working on Radeon cards back in September, but version 2.0 no longer needs files from any other mod. In a 60-second Resident Evil Requiem run at 4K with FSR on an RX 9070 XT, the new build averaged 101.2 FPS with 78.5 FPS 1% lows, up from 91.3 and 66.0 FPS on version 1.6.1. That is roughly 11% and 19% better, respectively.

The headline 64% figure comes from a comparison with unnamed "other mods," which managed 61.6 FPS in the same scene. These are the developer's own numbers from one game on one GPU, and there's no mod-off baseline showing what Neural Rendering costs. Game support now includes PRAGMATA, Nioh 3 and GTA 5 Enhanced, the latter only in offline Story Mode with BattlEye disabled. RX 9060 series cards should work but are untested, while RX 7000 support is an alpha that hasn't been tried on real hardware yet.

NVIDIA GeForce 621.14 WHQL Game Ready Drivers Released

NVIDIA today released the latest version of GeForce Game Ready drivers. Version 621.14 WHQL comes with optimization for "World of Warcraft: Forever," and the new Slaughter Mode of "DOOM: The Dark Ages Revelations." The drivers also introduce support for DLSS 5 with 3D-guided Neural Rendering for "Hogwarts Legacy" and "War Thunder" on GeForce RTX 50-series GPUs. Among the gaming bugs fixed with this release are incorrect visual colors displayed in "Call of Duty: Modern Warfare 4." Among the general bugs fixed are an issue seen where video playback freezes or turns black on some GeForce RTX 50-series GPUs or RTX Spark processors after updating to driver version 621.01. Grab the driver from the link below.

DOWNLOAD: NVIDIA GeForce 621.14 WHQL

GPU Prices Up Again in October, RTX 5090 Now Sells for 262% Over MSRP Worldwide

In a big surprise to no one, graphics card prices went up again in October. TechSpot's latest survey across 10 countries shows GPU prices rising 11% month over month, following a 15% jump in August and 7% in September, or roughly 35% over three months. On average, cards now sell for 44% above MSRP, climbing to 58% in the US and Canada. Keep in mind these numbers track the lowest in-stock price in each region, so most models cost even more. Moreover, there is another GeForce RTX 50-series price hike on the horizon, so these numbers will rise again pretty soon.

The GeForce RTX 5090 is in a league of its own. It got 32% pricier in a month, and its normalized global price of $7,240 sits a staggering 262% above its $1,999 MSRP, almost double the 136% figure from early September. In the US, the cheapest in-stock model now costs $9,400, or 370% over MSRP, and most models now sit above $11,000 comfortably. The RTX 5080 is following a similar path, up 22% in a month to $2,200 in the US, while Newegg had none of its own in stock when the data was collected. TechSpot argues the GDDR7 memory crisis can't explain a jump that big, and some retail sources apparently told them wholesale RTX 5080 costs have gone up recently too.

GPU Makers Focus on RTX 3060/3050 as RTX 50 Series Inventory Dries Up

GPU makers across Asia, particularly in China, are reportedly redirecting their sellers to older graphics cards as an alternative due to the low supply of NVIDIA's latest GeForce RTX 50-series "Blackwell" graphics cards. They are focusing on the recently resurrected GeForce RTX 3060 and RTX 3050, which are entry-level graphics cards from two generations ago, reminiscent of the "Ampere" generation. A ChannelGate report notes that some add-in card partners are already running out of GeForce RTX 50-series inventory due to cryptocurrency mining and e-commerce promotions in China, which are significantly draining the supply of these GPUs across retailers.

In June, NVIDIA reintroduced its GeForce RTX 3060 12 GB edition. This SKU features 3,584 CUDA cores and 12 GB of GDDR6 memory. For this, NVIDIA has once again used Samsung's 8 nm DUV node, as it did in the past. The entire NVIDIA "Ampere" architecture lineup was produced on the 8 nm DUV node. Reportedly, retailers are forcing sales of RTX 3060 and RTX 3050, in addition to some AMD Radeon SKUs, to offload demand for GeForce RTX 50-series designs. Below image is EVGA's older GeForce RTX 3060, not in production anymore.

New DLSS 5 Mod Borrows a VR Trick for Better Ultrawide Performance

A new DLSS 5 mod borrows a trick from VR headsets to make Neural Rendering less punishing on ultrawide monitors. FoveatedDLSS5, a ReShade add-on built by maximedgoulet, keeps neural rendering at full resolution in the middle of the screen and steps it down toward the edges, where peripheral vision picks up less detail. In a Reddit post, the modder says The Witcher 3 went from 49 FPS to about 80 FPS on an RTX 4090 at 7680x2160 with 2x multipass, a gain of over 60%.

With default settings on a 7680x2160 panel, Neural Rendering ends up processing about 71% of the original pixels. Smaller screens gain less, however. At 4K, the defaults leave 93% of the pixels, and at 3440x1440 the mod turns itself off, so 16:9 and 21:9 users should shrink the center zone. It's also a pre-release tested in one game, and it only works when neural rendering runs after upscaling, which rules out pairing it with the Neural Upstream trick. Videocardz points out a similar project, CheekyFoveatedDLSS, that has been out since early September and adds eye-tracked foveation for VR headsets.

NVIDIA's Faster DLSS 5 Model Gets Extracted From NBA 2K27, Modders Report Up to 90% Gains

NVIDIA shipped its faster DLSS 5 Neural Rendering model with NBA 2K27 on October 16, and it didn't take modders long to pull it out and test it elsewhere. Renan Maniero on X extracted the new 310.9.16.0 build of the DLL. That lets people inject it into games that don't officially support DLSS 5 through tools like RenoDX and OptiScaler. The new DLL also keeps the older model around as Preset A, with the new one sitting under Preset B, so comparing the two is as simple as switching presets. Gaming Optimized on X did exactly that, and found the new model running up to 90% faster than the old one in The Witcher 3. The channel points out that the gain varies from game to game, so 90% looks like the best case rather than the norm.

That roughly aligns with NVIDIA's own claims. The company says the October update shrinks the model by 24% to roughly 118 million parameters, cuts VRAM use at 4K by 20%, and runs the neural rendering workload up to 2x faster than the September version. NVIDIA also quoted up to 40% higher frame rates in NBA 2K27 specifically. Officially, DLSS 5 is still limited to RTX 50-series GPUs and GeForce NOW. NVIDIA plans to bring it to the RTX 40-series, though there's no date yet, and there's no word on RTX 30 or RTX 20 support. Modders, apparently, aren't waiting, since the OptiScaler README notes a modified runtime that gets it running on RTX 20-series cards as well.

NVIDIA RTX 5060 Ti 16 GB Price Hikes Put Entry-Level GPU Above $1,200 in Japan

On two separate occasions, in August and again in September, it was predicted that entry-level GPUs would see significant price increases in the second half of 2026, and it seems as though that prediction has come true, as showed in a recent Reddit post sharing updated retailer listing prices for NVIDIA GeForce RTX 50-series GPUs from Japan—one of the countries where PC hardware prices are often felt sooner than in international markets. According to the price list, the cheapest available RTX 5060 Ti 8 GB was ¥118,800 (~$750 converted), while RTX 5060 Ti 16 GB prices start at ¥139,800 (~$882 converted).

Meanwhile, the RTX 5070 12 GB starts at ¥145,800 (~$920 converted), 5070 Ti prices start at ¥230,800 (~$1,456 converted), and the RTX 5080 16 GB has climbed to a starting price of ¥295,801 (~$1,867 converted). Compared to MSRP, these new prices represent an increase of around 59% for the RTX 5060 Ti 8 GB, 66-144% for the 5060 Ti 16 GB, 32-82% for the 5070, and as much as 94% for the RTX 5080.

Modder Solders Dual 8-Pin Board to RTX 5090's 16-Pin Header, Wires Stay Below 40°C

Melting 16-pin connectors keep making headlines, and some RTX 5090 owners have started taking the protection of their expensive cards into their own hands. Reddit user DallasGrave has modified an MSI GeForce RTX 5090 with two extra 8-pin PCIe power inputs that work alongside the card's original 16-pin connector. According to their post on r/pcmasterrace, a small pickup PCB is soldered to the contacts of the 16-pin header, and that board feeds a second PCB carrying the two 8-pin sockets. The card then runs on three cables in total. DallasGrave says each conductor now carries roughly 3 A, and that the wires never crossed 40°C during a 48-hour run at 550 W, even at the joint. More test data is apparently on the way, so for now these are the modder's own numbers.

The 12V-2x6 revision was supposed to fix the melting power connector issues. In early 2025, NVIDIA said the 16-pin melting issues were over, pointing to the updated connector on the RTX 50-series. However, the first melted RTX 5090 Founders Edition was reported shortly after, in that case with a third-party cable. Since then, several RTX 5090 power connectors have reportedly melted, including one with an undervolt and a -100 W power limit. Moreover, last month Hardware Unboxed watched its RTX 5090 power cable reach 175°C with a single wire pulling around 22 A.

Kingpin Teases Upcoming ASUS Extreme OC Collaboration

After EVGA's abrupt exit from the GPU space, high-profile Vince Lucido, aka Kingpin, seemingly took a hiatus from the PC overclocking scene, aside from briefly working with PNY on a planned RTX 50-series launch before scrapping the project. Now, as per a recent video update on his YouTube channel, Lucido has found another hardware partner for his signature overclocking GPUs in ASUS.

In the update, Lucido confirms that he has "some really sick hardware from ASUS and Corsair to start with," and that he has had "numerous talks" with high-level management at ASUS, which are what ultimately persuaded him to get back into the overclocking industry. He has promised that whatever he has planned for PC overclocking will appear on the Overclock Kingpin YouTube channel, which has no published videos at the time of writing.

Micron's 2 GB GDDR7 Memory Chips Reportedly Reach End of Life

Micron has reportedly discontinued its 2 GB GDDR7 memory chips, the same modules used on several GeForce RTX 50 series cards. Spotted by UNIKO's Hardware, Micron's 28 Gbps D8FHL chip (MT68A512M32DF-28:A) is now listed as end of life on the company's own website. Every 2 GB GDDR7 chip in Micron's catalog, both the 28 Gbps and 32 Gbps variants, now carries the same EOL status, leaving 3 GB modules as the only option going forward.

Micron only started supplying GDDR7 to NVIDIA in a meaningful way earlier this year, and its chips were never the primary source for RTX 50 cards. Samsung and SK Hynix still cover the bulk of the supply, so this shouldn't cause an immediate shortage. Still, losing even a partial supplier during an already tight memory market isn't reassuring, and it says something about where these companies would rather put their manufacturing capacity these days.

CyberPowerPC Launches RTX Founders Edition Pre-Built PCs Starting at $1,549

NVIDIA's Founders Edition graphics cards are generally restricted to its own retail channels, but it seems as though CyberPowerPC has a limited run of RTX 50-series GPUs available in its pre-built gaming PCs for a GeForce Week event, which is slated to run until September 27. The CyberPowerPCs are currently available at Walmart with an NVIDIA GeForce RTX 5070 Founders Edition, RTX 5080 Founders Edition, or RTX 5090 Founders Edition, with CPU configs including both AMD and Intel variants.

There are two versions of the RTX 5070-powered gaming PCs at Walmart. Both feature 32 GB of DDR5-6000 RAM, 1 TB of PCIe 4.0 SSD storage, 360 mm closed-loop liquid coolers, and the aforementioned NVIDIA RTX 5070 Founders Edition GPUs inside a CyberPowerPC MA-01 case. The only difference between them is that the $1,599 variant comes with an AMD Ryzen 7 7800X3D, while the version featuring an Intel Core i7-14700KF comes in at $1,549.

Mod Pushes NVIDIA RTX 5090 Laptop GPU to 225 W

Gaming laptop GPUs are generally power limited, which often results in significant performance losses compared to their desktop contemporaries, especially for higher-powered GPUs. However, a new mod called NvpwrControl aims to increase performance of NVIDIA's latest RTX 50-series gaming laptops by increasing their power targets using baked-in power policies not available to consumers.

The developer, who found the workaround by reverse-engineering NVIDIA's power management path, says that the mod supports the RTX 5070 Ti, 5080, and 5090 GPUs, with 140 W TGP 5070 Ti GPUs getting power targets all the way to 180 W. The 5070 Ti is the GPU with the most robust support so far, with the developer explicitly stating that RTX 5080 and 5090 support is experimental. Purportedly, the RTX 5080 and 5090 should be able to reach as high as 225 W with NvpwrControl, although that doesn't come without risks and caveats.

NVIDIA Reportedly Rejected RTX 5090 RMA Over Faded Serial Number

An RTX 5090 Founders Edition owner says NVIDIA turned down a warranty claim because the serial number on the card's metal bracket had faded past the point of being readable. According to a Reddit post on r/NVIDIA from user Willing-Avocado-4830, the card began throwing black screen crashes under heavy load, so the owner returned it to NVIDIA for an RMA. After roughly a month of waiting, NVIDIA reportedly rejected the claim with little explanation, and a follow-up email revealed the reason. The printed serial number was apparently too faded to confirm.

The owner claims to have never removed the bracket, and still has the original box and matching invoice. That raises an obvious question, since the same serial number is printed on the card's modular PCIe connector too, and can reportedly be pulled from Windows using NVIDIA's SMI tool, at least while the GPU still boots. NVIDIA rejecting an RMA simply due to a faded serial number is questionable, to say the least, especially with RTX 5090 stock already scarce and prices well above MSRP. Here's what the faded serial number looks like, according to another Redditor who shared this image.

NVIDIA is Giving Away RTX 5090s Through an NBA 2K27 Screenshot Contest

NVIDIA has launched the NBA 2K27 DLSS 5 Poster Challenge, giving away four custom RTX 5090 graphics cards as prizes. Given what the card actually costs to buy right now, the timing is a little funny. To enter, players capture an in-game NBA 2K27 screenshot or clip with DLSS 5 enabled on an RTX 50-series GPU, or through GeForce NOW Ultimate streaming from RTX 5080 servers, then post it tagging @NVIDIAGeForce with the hashtag RTXPoster. Easier entry paths exist too, like voting on other posters or replying to prompts on GeForce's social channels. The contest runs through December 31, with winners announced by the end of January 2027.

NVIDIA values each card at $2,599, including the custom NBA 2K27 wrap. That number looks almost quaint next to what the RTX 5090 actually sells for. Multiple retail trackers put US street prices well past $5,000 this month, more than double the card's $1,999 launch price, largely thanks to the GDDR7 memory crunch that has been squeezing the entire GPU lineup. Prices have kept climbing for months now, with no sign of letting up. So, oddly enough, winning a poster contest might be one of the more realistic ways to grab an RTX 5090 without draining your bank account. It's a fun bit of marketing for a card that's become something of a punchline for how far GPU pricing has drifted, though I doubt NVIDIA meant it that way.

Modders Unlock DLSS Multi Frame Generation For RTX 30-Series "Ampere" GPUs

After porting DLSS 5 to every recent NVIDIA generation, the modding community now seems to be turning its focus to Frame Generation. A new mod called DLSSG SM86 lets GeForce RTX 30-series owners run DLSS Multi Frame Generation in 2X and 4X modes, a feature NVIDIA officially reserves for RTX 50-series "Blackwell" GPUs. Unlike earlier workarounds that swap in AMD's FSR Frame Generation, this project keeps NVIDIA's own DLSS models intact. It works by creating a proxy backend for the RTX 30-series' SM86 architecture that runs alongside the game and redirects frame generation calls to a bundled DLSSG 310.1 runtime, without touching the game's own files.

The developer's documentation lists the RTX 3080 Ti as the tested card, running driver 591.86 under Windows with D3D12. Reported gains include Black Myth: Wukong climbing from 50 FPS to 150 FPS at 4X Frame Gen, and Cyberpunk 2077 with path tracing going from 35 FPS to 100 FPS. That said, the developer is upfront that formal frametime, latency, and long-duration stability testing hasn't been done yet, so real-world smoothness don't fully match those raw numbers. A YouTube video by fogoticus also shows the feature being tested on an RTX 3080, with Cyberpunk 2077 jumping from around 42 FPS to 74 FPS in 2X mode, then to 120 FPS in 4X mode.

Modders Rework DLSS 5's Rendering Pipeline For a Big Performance Boost

Modders have found a way to cut the huge performance cost of NVIDIA's DLSS 5 Neural Rendering. The fix involves reworking the DLSS 5 rendering order so that neural rendering runs before upscaling. The mod, called Neural Upstream and built by matiasLombo, now works through DLSS5-Autopilot, a community tool similar to DLSS 5 Swapper, that runs Neural Rendering in games NVIDIA never officially supported. A Redditor tested this fix on an RTX 4080 in Assassin's Creed Shadows at 4K with DLSS Performance. Switching from NVIDIA's standard pipeline to Neural Upstream reportedly pushed frame rates from 31 FPS up to around 50 FPS, compared to 63 FPS with the effect off entirely.

The trick comes down to where NVIDIA placed Neural Rendering in the pipeline. It normally runs last, on the fully upscaled 4K frame, which is why the cost balloons at higher resolutions. This is an issue the modders already ran into when they first got Neural Rendering working on RTX 40-series cards. Neural Upstream instead applies it to the lower-resolution frame before DLSS Super Resolution scales it up, similar to how Performance and Quality presets already work for regular upscaling. It looks like NVIDIA leaned toward image fidelity in the standard application, so the trade-off is a further hit to visual quality on top of DLSS 5's existing "uncanny valley" issues.

Japanese Retailer Predicts Further GPU Price Hikes

We recently reported that NVIDIA's RTX 50-series GPU prices rose by a median 41% between August and July 2026, putting the RTX 5090 at a whopping $4,700+. However, it seems as though the DRAM and GPU crisis is not quite done emptying the pockets of gamers just yet. According to one Japanese retailer, Applied Group (アプライド), GPU prices are slated to rise in the coming months or weeks yet again.
Applied Group on X (machine translated)There's talk about graphics card price hikes, but some graphics cards are slated for even further price increases. For those considering an upgrade, I recommend doing so sooner rather than later.

New DLSS 5 Swapper Tool Brings Neural Rendering to Games NVIDIA Never Supported

A new tool called DLSS 5 Swapper, published on GitHub by developer rakanki911, automates installing DLSS 5's Neural Rendering into games, including ones that never officially got support for it. Users can drag and drop a game into the app, or let it scan the drive for installed titles on its own. For games that already ship with DLSS, the swap is simple. For everything else, the tool relies on DLSS5-Feeder, a community mod that emulates the DLSS calls required to trigger Neural Rendering, paired with ReShade for the depth buffer and motion data that DLSS needs to work. That combination reportedly runs across titles from DirectX 9 through DirectX 12, and even on a handful of emulators like PCSX2, Dolphin, and Xenia.

Perhaps even more interestingly, the app also extends DLSS 5 support to RTX 20-series and RTX 30-series graphics cards, sidestepping NVIDIA's RTX 50-series requirement. This tool builds on the same leaked DLSS 5 files that surfaced in NBA 2K27's pre-launch build, files modders have spent weeks getting to run on older GPUs and non-DLSS games. DLSS 5 Swapper mostly bundles that scattered work into a single app; however, since it's unofficial and has no ties to NVIDIA, it's important to verify the download source before installing anything. Given how far these mods have already spread, this tool is likely to become the most popular way for people to try Neural Rendering, at least until NVIDIA offers something similar itself.
Return to Keyword Browsing
Nov 18th, 2026 18:20 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts