Tuesday, December 23rd 2025

AMD Prepares EXPO v1.2 for Better Memory OC Profiles

AMD's Extended Profiles for Overclocking (EXPO) technology is receiving an update with version 1.2. According to the latest HWiNFO v8.35-5890 Beta, this tool has added support for AMD EXPO 1.2, even though AMD has not officially released this version yet. Currently, AMD employs EXPO 1.0 with its Ryzen processors to provide optimal overclocked memory profiles for each configuration. This approach enhances overall system performance and gives the Infinity Fabric, which interconnects the CCDs and IODs, perfect balance of latency and speed.

What will come with EXPO 1.2 remains a mystery. Recently, as part of the "Granite Ridge" Ryzen 9000 X3D series, AMD's upcoming Ryzen 7 9850X3D processor was seen running with 9,800 MT/s DDR5 memory, which is unusually high for its class in this late-cycle "Zen 5" SKU. AMD could bring some late-stage "Zen 5" memory profile optimizations that we haven't seen so far, just in time for the late cycle X3D SKUs.

Update 22:15 UTC: According to AMD insider and author of HYDRA, CTR, DRAM calculator for AMD Ryzen 1usmus on X, the EXPO 1.2 will finally include support for CUDIMMs. These are DDR5 modules with integrated clock driver circuits, which improve signal integrity at higher frequencies, allowing the DDR5 modules to reach frequencies beyond JEDEC-provided range. We still have no idea how AMD plans to implement this. The slide below is just for illustrative purposes and is AMD's earlier mention of EXPO. It does not reflect the latest 1.2 version.
Source: HWiNFO
Add your own comment

18 Comments on AMD Prepares EXPO v1.2 for Better Memory OC Profiles

#1
A Computer Guy
Hopefully it comes with some consideration that prevents your CPU from exploding.
Posted on Reply
#2
ymdhis
I'm hopeful that this is just another sign that Zen 6 will finally have a memory controller that won't suck.
Posted on Reply
#3
Mysteoa
A Computer GuyHopefully it comes with some consideration that prevents your CPU from exploding.
Wasn't this just some MB vendor "Default" settings problem.
Posted on Reply
#4
A Computer Guy
MysteoaWasn't this just some MB vendor "Default" settings problem.
If I remember correctly it was an initial max SOC voltage correction across all vendors after AM5 launched because it was exploding X3D CPU's. Wither it was miscommunication between AMD and vendors or AMD just flying too close to the sun with new tech, or maybe a bit of both, I'm not sure.
Posted on Reply
#5
Philaphlous
Considering my EXPO default VSOC voltage on my ASROCK B650i motherboard was 1.3V.... I'm guessing that's likely not the best long-term 24/7 option. 1.15VSOC entirely stable even with a FCLK overclock...
Posted on Reply
#6
freeagent
1.3 is fine.. if you need it for the speed you are trying to run.
Posted on Reply
#7
lepudruk
Today something weird happened with my rig: after updating bios to 4.03 my motherboard started setting ram speed to 4800 although it's 6000 by default (with EXPO profile selected). No matter what I chose the system kept starting with slower ram speed and timings. Then, I tried switching ram profile and selected XMP instead (6000@30-36-36-76 default settings for this ram) and.. it's working! Just as it did before. It's just weird cause both profiles (XMP and EXPO) have the very same settings/timings/voltage (1.35). I'm puzzled.. :confused:
Posted on Reply
#8
ir_cow
Most likely its going to be that AMD special interleaved Dual-Rank memory type (HB-DIMM) that was leaked a few months back.

AMD runs 4800 DR memory and pretend it's 9600 lol.
Posted on Reply
#9
phints
EXPO really solved the early horrible slow boot times AM5/DDR5 platform had of like 30-60 seconds. My 9800X3D / B850 / DDR5 6000 CL28 build almost a year old boots in 10 seconds. Great to see EXPO keep evolving.
Posted on Reply
#10
Alan Smithee
Looking forward to these "PUBLIC DOUCMENTS", jesus AMD proofread your slides
Posted on Reply
#11
evernessince
One can hope this includes more timings added to the profile.
Posted on Reply
#12
rv8000
evernessinceOne can hope this includes more timings added to the profile.
This is the most likely case imo, especially now that trfc2 and trfcsb actually function on the latest AGESA release.

Nothing mentioned about cu-dimm support, articles need to stop spreading nonsense about dimms running at 9800mhz/mts. It ain’t happening as much as I want it to.
Posted on Reply
#13
Tam 212
What are the endnotes? RPL seems like a reference to the earlier Zen 4 7000-series?


Wonder if there is anything of potential benefit for the folks who jumped on AM5 early in the platform's lifecycle...
Posted on Reply
#14
igormp
Tam 212What are the endnotes? RPL seems like a reference to the earlier Zen 4 7000-series?


Wonder if there is anything of potential benefit for the folks who jumped on AM5 early in the platform's lifecycle...
That image is just illustrative and was part of the AM5/7000 series launch slides, it's not really related to the whole EXPO 1.2 news.
Posted on Reply
#15
AleksandarK
News Editor
I have updated the article with mention of CUDIMM from 1usmus, and also noted that the slide is just there for illustrative purposes
Posted on Reply
#16
Unregistered
AMD is really pulling out all the stops with Zen 6 to counter Nova Lake.
Posted on Edit | Reply
#17
tommo1982
I tried EXPO at 3600MHz with R5 5600 and it increased temperatures by almost 10°C at idlle. Haven't tried it with R5 7500F yet.
Will CUDIMM offload some of the burden of high clock rates to the driver on RAM sticks?
ZEN5 is CPU's are already runniny hot because of that silly cooler compatibility. No need to add more.
Posted on Reply
#18
ir_cow
tommo1982Will CUDIMM offload some of the burden of high clock rates to the driver on RAM sticks?
Nope. All that is different is a clock redriver on the PCB. Frequency is still the same as UDIMM
Posted on Reply
Add your own comment
Nov 22nd, 2026 16:46 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts