Friday, January 30th 2026

Streamer's MSI RTX 4090 Gaming Trio Takes a Smoke Break as 12vHPWR Nearly Claims Another Victim

Even though the 12vHPWR connector problem was ostensibly somewhat corrected by the introduction of the 12v-2x6 revision to the standard, meltdowns of both connectors have continued, with the latest documented case coming by way of an X post by streamer @jessickyeah. The GPU in question was an MSI NVIDIA GeForce RTX 4090 Gaming Trio, and in the video, you can see the top-most right wire in the GPU power cable smoking and bubbling. The meltdown happened mid-game, and the excess heat generated by the unbalanced load seems to begin affecting the connector on the GPU as well. The outcome of the event was never made public, but it's safe to assume the GPU would have eventually been taken out of commission if the PC had not been turned off.

Judging by previous posts on the streamer's account, the RTX 4090 seems to have been in use since at least March 2025, confirming once again that just because a card-cable combo have been working just fine for extended periods, that doesn't mean that a meltdown isn't possible. Currently, NVIDIA's recommendation to avoid potential issues is to avoid third-party extension cables and ensure that GPU power cables are properly seated. Some cable, GPU, and PSU brands have started addressing the issues with the connector by adding indicators to ensure proper cable insertion or by actively monitoring the cable itself for abnormal power balance.
Source: @jessickyeah on X
Add your own comment

42 Comments on Streamer's MSI RTX 4090 Gaming Trio Takes a Smoke Break as 12vHPWR Nearly Claims Another Victim

#1
phanbuey
Yep happend to me after nearly a year of use as well and has been fine now for 6 months since... Card survived as I smelled burning plastic and shut the rig off, but yikes. These connectors keep things exciting.

I literally hadn't touched it either - was working fine for a year then just one day decided to melt a cable.
Posted on Reply
#2
SemperPC09
Bum bum bum Another one bites the dust, and another one gone and another one gone. Hey! Your cables gonna burn too, another one bites the dust.

Ah that cable is slightly crispy, a new standard is needed.
Posted on Reply
#3
RejZoR
I think I'm just gonna stick with graphic cards that still runs old trusty 8pins until this new dumb connector design is killed off entirely and they create something reliable.
Posted on Reply
#5
Hecate91
I'll keep using reliable 8 pins until this standard gets a revision or something replaces it that is guaranteed to not burn or melt.
This standard at minimum needs load balancing by default with a better connector latch mechanism.
Posted on Reply
#7
sam_86314
Meanwhile, my BC250 can pull 220W from a single 8-pin PCIe continuously with no issues.

The PSU I use can do like 50A on the 12V rail, so it's not complaining, and since the PCIe connectors are usually daisy-chained, the wires can obviously handle more than 150W.

It's almost like, with this kind of current draw, you should use thicker wires and a connector with a wider safety margin...
Posted on Reply
#8
Outback Bronze
phanbueyYep happend to me after nearly a year of use as well and has been fine now for 6 months since... Card survived as I smelled burning plastic and shut the rig off, but yikes. These connectors keep things exciting.

I literally hadn't touched it either - was working fine for a year then just one day decided to melt a cable.
Shit... No good.

12VHPWR or 12V-2x6 connector?
Posted on Reply
#9
Guwapo77
Looks like some aftermarket cables...again. While we have seen some nice OEM wires bite the dust, it surely looks like the aftermarket ratio is seriously off.
Posted on Reply
#10
TheDeeGee
The Way It's Meant To Be BBQed! :roll:
Posted on Reply
#11
phanbuey
Outback BronzeShit... No good.

12VHPWR or 12V-2x6 connector?
the H+ 12VHPWR. The weird thing is it was fine for so long before it failed. you would think it would fail the first time it loaded because the connection was bad but nope. Just seemingly random.
Posted on Reply
#12
Prime2515102
phanbueythe H+ 12VHPWR. The weird thing is it was fine for so long before it failed. you would think it would fail the first time it loaded because the connection was bad but nope. Just seemingly random.
If only it would always fail before we needed it to...
Posted on Reply
#13
UKKN
Looks like burnt marshmallow lmfaoo
Posted on Reply
#14
LabRat 891
phanbueythe H+ 12VHPWR. The weird thing is it was fine for so long before it failed. you would think it would fail the first time it loaded because the connection was bad but nope. Just seemingly random.
I bet the conductors are vibrating with Transient Current loads.

Alternatively, "thermal cycling" can 'walk' metal and plastic out of seat, too.

I've personally seen 6+2s seemingly dislodge themselves with mains power failures, more-repeatably occurring when the GPU was under load.
Yes, I've seen it happen more than a few times and every time, a reseat of the GPU's power input resolved no POST. Only explanation I have, are magnetic forces dislodging/unseating the cable upon sudden and abrupt power loss.

Assuming I'm not totally off-my-rocker,
Coaxial or Twisted Pair (+V & GND) power conductors would likely mitigate the issues with the standard.
Posted on Reply
#15
Darmok N Jalad
phanbueythe H+ 12VHPWR. The weird thing is it was fine for so long before it failed. you would think it would fail the first time it loaded because the connection was bad but nope. Just seemingly random.
I wonder if it has to do with weather cycling. Right now it's far colder in my basement where my rig is versus spring/summer/fall. Perhaps enough idle cold temps followed by big ramps in heat caused enough of a physical change in the cable or connector to cause a micro-fault? What do the temps get to on these 600W cables?

All in all, whenever I look at this cable and connector in my Thermaltake PSU box, it just feels wrong. Too thick of a cable bundle for such a small connector, IMO, especially if 600W are in play.
Posted on Reply
#16
Event Horizon
At this rate we're going to start seeing cases with built-in IR cameras pointed at the GPU's power connector.
Posted on Reply
#17
R1nge
It all was planned from the beginning with the adoption of the glass side panel.
At first we thought that it looked cool, especially with all that rgb and stuff.
But now it's a necessity to keep an eye on the connector to keep the gpu from dying.

It feels like nowadays, aside from cleaning and re-pasting every couple of months, a new routine has been added to the list.
Posted on Reply
#18
evernessince
phanbueyYep happend to me after nearly a year of use as well and has been fine now for 6 months since... Card survived as I smelled burning plastic and shut the rig off, but yikes. These connectors keep things exciting.

I literally hadn't touched it either - was working fine for a year then just one day decided to melt a cable.
With the pin spread issue these connectors had from the start, more issues were always likely to happen over time due to aging and wear. Plus more users are finding that the pins also have a tendency to back out (much like molex connectors used to).

This connector is just a nightmare in general but I'm sure Nvidia is happy for the repeat customers.
Posted on Reply
#19
zenlessyank
We used to have to screw in VGA and PS2 connectors. This looks like a good place for that. Now go fix your previously unbroken standard.
Posted on Reply
#20
Quicks
People will keep defending Nvidia and this poor connector.

Let me guess didn't read the article, but the poor sod didn't plug it in properly or used the wrong cable /s
Posted on Reply
#21
oobymach
One of the main reasons I went with the 4070ti at the time, only used 2x 8pin to that little 12pin connector nonsense.

Pretty sure 300 watts won't melt anything.

600-800watts, that's the low setting on an electric heater. That's the power requirement for a microwave. I'm just saying, your gpu can cook my burrito.
Posted on Reply
#22
_roman_
well bullshit bingo
  • my card is fine
  • overclockers used ~2000 watt on rtx 5xxx and it is fine
  • no issue only 30 cards affected in europe according to aib ? for rtx 4000 or newer
  • low fail rate
  • user error
  • amd does not have that issue
  • pcie power connector is fne
  • psu fault
  • gpu schematic fault
  • psu schematic fault
  • cheap cable
  • cheap amazon cable
  • jay2cent said
  • other streamer xy said
  • bullzoid said
  • ...
Posted on Reply
#23
Readlight
How power supply and video cards get true all the EU safety regulations?
And why NVIDIA+ power supply's keeps making this garbage.
Look on car battery how thick wires has for high amperage. Current finds easiest way one wire.
Posted on Reply
#24
TheDeeGee
oobymachOne of the main reasons I went with the 4070ti at the time, only used 2x 8pin to that little 12pin connector nonsense.

Pretty sure 300 watts won't melt anything.

600-800watts, that's the low setting on an electric heater. That's the power requirement for a microwave. I'm just saying, your gpu can cook my burrito.
A couple of Sapphire 9070XT Nitro cards had melted connectors, and those are in the 300W range.

I have no doubt that eventually my 4070 Ti will suffer as well, even though it may take 6 years.
Posted on Reply
#25
Vayra86
phanbueyYep happend to me after nearly a year of use as well and has been fine now for 6 months since... Card survived as I smelled burning plastic and shut the rig off, but yikes. These connectors keep things exciting.

I literally hadn't touched it either - was working fine for a year then just one day decided to melt a cable.
This is fine.meme

Keep spending money on this if you want more of it, I guess.

Believe it or not but we can indeed put a halt to this and enforce something better...
_roman_well bullshit bingo
  • my card is fine
  • overclockers used ~2000 watt on rtx 5xxx and it is fine
  • no issue only 30 cards affected in europe according to aib ? for rtx 4000 or newer
  • low fail rate
  • user error
  • amd does not have that issue
  • pcie power connector is fne
  • psu fault
  • gpu schematic fault
  • psu schematic fault
  • cheap cable
  • cheap amazon cable
  • jay2cent said
  • other streamer xy said
  • bullzoid said
  • ...
Summarized as cognitive dissonance.

All you need is one look at pcie and then 12vhpwr and you can draw a simple conclusion on the spot: 'hey, there is far less material for more current'.
Posted on Reply
Add your own comment
Nov 17th, 2026 21:18 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts