Friday, January 30th 2026

Streamer's MSI RTX 4090 Gaming Trio Takes a Smoke Break as 12vHPWR Nearly Claims Another Victim

Even though the 12vHPWR connector problem was ostensibly somewhat corrected by the introduction of the 12v-2x6 revision to the standard, meltdowns of both connectors have continued, with the latest documented case coming by way of an X post by streamer @jessickyeah. The GPU in question was an MSI NVIDIA GeForce RTX 4090 Gaming Trio, and in the video, you can see the top-most right wire in the GPU power cable smoking and bubbling. The meltdown happened mid-game, and the excess heat generated by the unbalanced load seems to begin affecting the connector on the GPU as well. The outcome of the event was never made public, but it's safe to assume the GPU would have eventually been taken out of commission if the PC had not been turned off.

Judging by previous posts on the streamer's account, the RTX 4090 seems to have been in use since at least March 2025, confirming once again that just because a card-cable combo have been working just fine for extended periods, that doesn't mean that a meltdown isn't possible. Currently, NVIDIA's recommendation to avoid potential issues is to avoid third-party extension cables and ensure that GPU power cables are properly seated. Some cable, GPU, and PSU brands have started addressing the issues with the connector by adding indicators to ensure proper cable insertion or by actively monitoring the cable itself for abnormal power balance.
Source: @jessickyeah on X
Add your own comment

42 Comments on Streamer's MSI RTX 4090 Gaming Trio Takes a Smoke Break as 12vHPWR Nearly Claims Another Victim

#26
Wirko
Hecate91This standard at minimum needs load balancing by default with a better connector latch mechanism.
Small resistors won't do much, and the resistance of wires has some balancing effect already. In my opinion, the best low-cost solution would be current monitoring on each pin*, then forcing the GPU clock down to one half if some threshold is exceeded on any pin for more than a few seconds, then system shutdown if that's not enough. Make that mandatory, not optional.

*Or each pair of pins for <300W cards.
Edit: *Or each pair of pins for < 300W cards.
Posted on Reply
#27
EsaT
LabRat 891I bet the conductors are vibrating with Transient Current loads.
I can only assume it's that kind of interaction what is regularly making wires of nearby 20 kV powerline shake/vibrate near couple poles.
In calm weather when observing sky with telescope I can often hear sound of that literally from half kilometer away.
Always wondered when something wears out/fails from that repetitive extra mechanical stress...
Darmok N JaladI wonder if it has to do with weather cycling. Right now it's far colder in my basement where my rig is versus spring/summer/fall. Perhaps enough idle cold temps followed by big ramps in heat caused enough of a physical change in the cable or connector to cause a micro-fault?
Thermal expansion cycling is definitely thing and not only for metals put also plastics...
Which actually have typically far higher thermal expansion than metals:
www.engineeringtoolbox.com/linear-expansion-coefficients-d_95.html
Because of that some of the plastic protective caps on telescopes are very hard to put back on in cold weather... They've simply shrunk so much more than telescope tube.
Guwapo77Looks like some aftermarket cables...again. While we have seen some nice OEM wires bite the dust, it surely looks like the aftermarket ratio is seriously off.
You got short memory or were born only yester-year?
Aftermarket cables and adapters have been there always.

During early era of 6 and 8 pin PCIe power connectors there were adapter cables literally from those shaky&loose looking contacts PATA drive Molexes!
Still people didn't need to be regularly worried because involved connecters were properly designed by engineers and had proper safety margins.
Posted on Reply
#28
Roph
I will not buy a GPU with this unsafe connector
Posted on Reply
#29
azrael
I've just realized why "fishtank" cases are so popular and sell so well...
Posted on Reply
#30
ixi
Event HorizonAt this rate we're going to start seeing cases with built-in IR cameras pointed at the GPU's power connector.
Naaa, naaaa. Cases with built in AI chip which can smell smoke and if there is smoke. Gonna sing through speakers: woop woop sound of fire, woop wopp sound of melting, woop woop sound of firefighters.
Posted on Reply
#31
phanbuey
Vayra86This is fine.meme

Keep spending money on this if you want more of it, I guess.

Believe it or not but we can indeed put a halt to this and enforce something better...


Summarized as cognitive dissonance.

All you need is one look at pcie and then 12vhpwr and you can draw a simple conclusion on the spot: 'hey, there is far less material for more current'.
We could if there was competition... But if you want to play at 4K 240Hz, you get the idiot cable and prayer.
Posted on Reply
#32
Shtb
It just does not works.

Posted on Reply
#33
MagnuTron
ixiNaaa, naaaa. Cases with built in AI chip which can smell smoke and if there is smoke. Gonna sing through speakers: woop woop sound of fire, woop wopp sound of melting, woop woop sound of firefighters.
.. A fire alarm?
Posted on Reply
#34
BorisDG
This is just like burning Ryzen CPUs. It's a bit of user error too aka how you will install your CPU/Cooler. Here is the cable...
Posted on Reply
#35
midnitet0ker
phanbueythe H+ 12VHPWR. The weird thing is it was fine for so long before it failed. you would think it would fail the first time it loaded because the connection was bad but nope. Just seemingly random.
I suspect that the heat from so much electrical current wears down the wire itself. Keep in mind that as things heat up, they expand and when they cool down, they contract. Over time, this can cause breakdowns in conductivity resulting in unbalanced loads and the next thing you know, you're seeing smoke come out of your rig.
Posted on Reply
#36
dont whant to set it"'
zenlessyankMy 3x8 connectors are giggling.
With a cool (mood-vibe" feel to the touch too.
Don't ask me how I know.
Posted on Reply
#37
Wirko
ixiNaaa, naaaa. Cases with built in AI chip which can smell smoke and if there is smoke. Gonna sing through speakers: woop woop sound of fire, woop wopp sound of melting, woop woop sound of firefighters.
The sound of firefighters, without real firefighters on the way, would give the PEBKAC a false sense of security.
Posted on Reply
#38
Vayra86
phanbueyWe could if there was competition... But if you want to play at 4K 240Hz, you get the idiot cable and prayer.
Want... yeah. Want is the core issue ;)
Posted on Reply
#39
CornyOC
I can tell from the pic that the cable wires were pulled sideways and bent within 35mm. These pins are only crimped into the connector and if the cable gets bent or pulled at an angle close to the connector the pins may get pulled out or turned away. This is the main contributor to these melting connector scenarios in my opinion. Keep the cable straight and unbent within 35mm. Either way, these cables should have better per wire pin design, and the connector should be molded around the pins.
Posted on Reply
#40
_roman_
that is not an argument: the bend topic is a bullshit bingo argument about a bad connector design.

my powercolor 7800xt hellhound has in fractal design meshify 2 case with enermax revolution d.f. 750w power supply unit similar bent cables. not the h12v whattever cable but still powerr cables to a graphic card.

most computer builds have similar paths for the cables. the cables are usually bend.
Posted on Reply
#41
Darmok N Jalad
If the cable is not meant to be bent or have undue strain, then having it exit these massive cards at 90 degrees puts them in direct conflict with the case’s sidewall. That’s why NVIDIA at least tried with the angled port, but it’s still not ideal since a bundle of wires that thick are going to pull at that connection thanks to gravity. This reminds me a lot of Ive’s dumb “impossibly thin” MacBook Pro designs. There wasn’t enough room for proper cooling and a decent keyboard, but gosh it looked cool.
Posted on Reply
#42
EarthDog
....looks at picture, sees 180° bend over 3" diameter, understands why this one happened. :slap:

Edit: "BS bingo argument" (que?) or not, it was bent in ways we're told not to. A lot of products come with specific ways to use it, be it for design (failures, lol) or otherwise... follow the instructions and chances are you dont burn.

Cart or the horse doesnt matter, its a shitshow. To minimize the minimal risk means not bending your cables lime that.
Posted on Reply
Add your own comment
Nov 17th, 2026 21:26 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts