Friday, January 30th 2026
Streamer's MSI RTX 4090 Gaming Trio Takes a Smoke Break as 12vHPWR Nearly Claims Another Victim
Even though the 12vHPWR connector problem was ostensibly somewhat corrected by the introduction of the 12v-2x6 revision to the standard, meltdowns of both connectors have continued, with the latest documented case coming by way of an X post by streamer @jessickyeah. The GPU in question was an MSI NVIDIA GeForce RTX 4090 Gaming Trio, and in the video, you can see the top-most right wire in the GPU power cable smoking and bubbling. The meltdown happened mid-game, and the excess heat generated by the unbalanced load seems to begin affecting the connector on the GPU as well. The outcome of the event was never made public, but it's safe to assume the GPU would have eventually been taken out of commission if the PC had not been turned off.
Judging by previous posts on the streamer's account, the RTX 4090 seems to have been in use since at least March 2025, confirming once again that just because a card-cable combo have been working just fine for extended periods, that doesn't mean that a meltdown isn't possible. Currently, NVIDIA's recommendation to avoid potential issues is to avoid third-party extension cables and ensure that GPU power cables are properly seated. Some cable, GPU, and PSU brands have started addressing the issues with the connector by adding indicators to ensure proper cable insertion or by actively monitoring the cable itself for abnormal power balance.
Source:
@jessickyeah on X
Judging by previous posts on the streamer's account, the RTX 4090 seems to have been in use since at least March 2025, confirming once again that just because a card-cable combo have been working just fine for extended periods, that doesn't mean that a meltdown isn't possible. Currently, NVIDIA's recommendation to avoid potential issues is to avoid third-party extension cables and ensure that GPU power cables are properly seated. Some cable, GPU, and PSU brands have started addressing the issues with the connector by adding indicators to ensure proper cable insertion or by actively monitoring the cable itself for abnormal power balance.


42 Comments on Streamer's MSI RTX 4090 Gaming Trio Takes a Smoke Break as 12vHPWR Nearly Claims Another Victim
I literally hadn't touched it either - was working fine for a year then just one day decided to melt a cable.
Ah that cable is slightly crispy, a new standard is needed.
This standard at minimum needs load balancing by default with a better connector latch mechanism.
The PSU I use can do like 50A on the 12V rail, so it's not complaining, and since the PCIe connectors are usually daisy-chained, the wires can obviously handle more than 150W.
It's almost like, with this kind of current draw, you should use thicker wires and a connector with a wider safety margin...
12VHPWR or 12V-2x6 connector?
Alternatively, "thermal cycling" can 'walk' metal and plastic out of seat, too.
I've personally seen 6+2s seemingly dislodge themselves with mains power failures, more-repeatably occurring when the GPU was under load.
Yes, I've seen it happen more than a few times and every time, a reseat of the GPU's power input resolved no POST. Only explanation I have, are magnetic forces dislodging/unseating the cable upon sudden and abrupt power loss.
Assuming I'm not totally off-my-rocker,
Coaxial or Twisted Pair (+V & GND) power conductors would likely mitigate the issues with the standard.
All in all, whenever I look at this cable and connector in my Thermaltake PSU box, it just feels wrong. Too thick of a cable bundle for such a small connector, IMO, especially if 600W are in play.
At first we thought that it looked cool, especially with all that rgb and stuff.
But now it's a necessity to keep an eye on the connector to keep the gpu from dying.
It feels like nowadays, aside from cleaning and re-pasting every couple of months, a new routine has been added to the list.
This connector is just a nightmare in general but I'm sure Nvidia is happy for the repeat customers.
Let me guess didn't read the article, but the poor sod didn't plug it in properly or used the wrong cable /s
Pretty sure 300 watts won't melt anything.
600-800watts, that's the low setting on an electric heater. That's the power requirement for a microwave. I'm just saying, your gpu can cook my burrito.
And why NVIDIA+ power supply's keeps making this garbage.
Look on car battery how thick wires has for high amperage. Current finds easiest way one wire.
I have no doubt that eventually my 4070 Ti will suffer as well, even though it may take 6 years.
Keep spending money on this if you want more of it, I guess.
Believe it or not but we can indeed put a halt to this and enforce something better...Summarized as cognitive dissonance.
All you need is one look at pcie and then 12vhpwr and you can draw a simple conclusion on the spot: 'hey, there is far less material for more current'.