Friday, February 6th 2026

AMD Ryzen Threadripper Pro 9995WX OC Draws 1,300 W Under Direct-Die Watercooling

AMD Ryzen Threadripper Pro 9995WX HEDT processor with 96 cores and 192 threads comes with a default TDP of 350 W. However, heavy overclocking can bring the CPU to 1,300 W and requires a custom integrated heat spreader (IHS) that serves as a direct-die waterblock. In the latest endeavor by Geekerwan, the enthusiast created a custom fin structure inside the Ryzen Threadripper Pro 9995WX IHS that serves as a direct-die waterblock to achieve an impressive overclock of 5.325 GHz, drawing an astonishing 1,340 W during load, with the entire system drawing around 1,700 W. According to Geekerwan, he contacted ASUS China regional manager Tony Yu to experiment with different IHS designs before "ruining" the IHS of a $12,000 HEDT CPU. He then proceeded with trying a straight fin structure common in commercial waterblocks, but also conducted computer simulations that showed a curved, wavy S-shaped fin structure is the most efficient in capturing heat, as the coolant flows over a longer distance with minimal obstruction, resulting in 20% better cooling than the straight fin structure.

The IHS of the AMD Ryzen Threadripper Pro 9995WX processor is 4.1 mm thick, which left Geekerwan with about 2.0 mm of fin depth and about 2.1 mm for the structural integrity of the IHS, which is subject to a lot of water pressure. After a heavy 19-hour session of CNC milling, the result is a CPU that ran between 30-50°C, which is an amazing temperature under Cinebench 2026 load. The system also placed 7th in Cinebench R23, just behind an LN2-cooled AMD Ryzen Threadripper Pro 7995WX running at 6.2 GHz. Impressive heat dissipation and the massive 5.325 GHz clock on a 96-core system are also made possible with an industrial chiller, two Bosch water pumps from cars, and a 37-gallon water tank. You can check out the entire process below.
Source: via Tom's Hardware
Add your own comment

16 Comments on AMD Ryzen Threadripper Pro 9995WX OC Draws 1,300 W Under Direct-Die Watercooling

#1
zenlessyank
Going to need another 200 amp service setup at your house so you can work from home on your workstation!

Then you will have to sell your house to fill your workstation with RAM.
Posted on Reply
#2
theglaze
Impressive IHS! Crazy small CNC execution, I can see why it took 19 hours ahha
Posted on Reply
#4
jesdals
There is the explanation of Der8auer video about rising Cobber prizes...
Posted on Reply
#5
kondamin
zenlessyankGoing to need another 200 amp service setup at your house so you can work from home on your workstation!

Then you will have to sell your house to fill your workstation with RAM.
I think it would run just fine on stock settings not getting anywhere near 1300w
Posted on Reply
#6
ymdhis
Okay, but does it have RGB lights?
Posted on Reply
#7
freeagent
Impressive. Good job AMD.

It’s cold today, cmon global warming..
Posted on Reply
#8
Steevo
ymdhisOkay, but does it have RGB lights?
Asking the important questions.

Many times we all set back in our chair and think "holy shit". This is one of those times.

Now do Ln2 and see how far it goes, or Liqid Helium.....
Posted on Reply
#10
FreedomEclipse
~Technological Technocrat~
Interesting IHS/block design. I would have assumed it would need more fins for better heat dissipation.

Unless the liquid being used in the loop is different from what is being used and available on the consumer market??
Posted on Reply
#11
Blue4130
FreedomEclipseInteresting IHS/block design. I would have assumed it would need more fins for better heat dissipation.

Unless the liquid being used in the loop is different from what is being used and available on the consumer market??
More thinner fins would be better, but that isn't something that can be done via CNC. You are limited how small you can make them based on mill bit size. Traditioanlly fins are skived.
Posted on Reply
#12
FreedomEclipse
~Technological Technocrat~
Blue4130More thinner fins would be better, but that isn't something that can be done via CNC. You are limited how small you can make them based on mill bit size. Traditioanlly fins are skived.
To reiterate. I thought it would have looked like this:



But encased in a waterblock. More surface area to dissipate the heat.
Posted on Reply
#13
Oberon
FreedomEclipseTo reiterate. I thought it would have looked like this:



But encased in a waterblock. More surface area to dissipate the heat.
The volumetric flow rate of the coolant would be about the same, and that's what is important. Water cooling is a balancing act between making your channels as small as possible to promote turbulence (and therefore transfer of heat into the coolant) and not murdering your flow rate. Too big a channel and you end up with a lot of water that doesn't absorb any heat, too small a channel and you don't push a large enough volume of water to take the heat away efficiently.
Posted on Reply
#14
bonehead123
Blue4130More thinner fins would be better, but that isn't something that can be done via CNC. You are limited how small you can make them based on mill bit size. Traditioanlly fins are skived.
Well.......... you could always get an AI bot to make it whatever size you want, hahahaha :D /s

This is just sarcasm, as I would rather have my guts yanked out by a zombie than have any AI do anything for me !
Posted on Reply
#15
b1k3rdude
When electricity prices are going up around the world, this like the 5090 is pointless. The niche segment of people that can afford this nonsense is growing smaller and the price increasing as a result.\

hard yawn, this is about as uninteresting a topic and the ML/LLM noise...
Posted on Reply
#16
TechLurker
I find this interesting more due to the fact that AMD and others were already experimenting with a possible integrated liquid-cooled IHS or even direct die cooling via microtubes within the substrate that helped bring heat away from the layers of the chiplets faster. I recall a few articles on it being posted here a few months back.
Posted on Reply
Add your own comment
Nov 20th, 2026 15:25 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts