Thursday, February 19th 2026
NVIDIA GeForce RTX 5090 Melts 12V-2×6 Connector Despite -100 W Power Limit
The melting and burning 12V-2×6 connectors on high-end NVIDIA—and some AMD—GPUs is well documented at this point, and although there is mounting evidence to support the fact that the new connector standard itself is partially to blame, there is still the idea that high power draw is to blame for these meltdowns. This is not necessarily the case, according to one user of the Mobile01 forum. According to the forum post about the incident, the top row of pins in a Gigabyte Aorus Master Ice RTX 5090's GPU power connector has melted down, despite the user having implemented a steep undervolt and power limit.
When installed, the user had limited GPU power to 500 W and dropped the voltage limit down to 0.9 v—that's a reduction of 100 W and 0.205 v compared to stock settings. It's worth noting that the GPU in question was connected to the PSU using a 16-pin adaptor, and the connector melted at the GPU side, not the PSU side, and the first indication of the meltdown was frequent crashing during gaming sessions. Both connector ends at the GPU side seem to be affected, but it's entirely possible that the GPU would have suffered even more damage had the power limit been higher. Currently, independent research seems to indicate that the 12V-2×6 cable itself seems to suffer from an unstable or inadequate connection, which increases the current and temperature across individual pins. Unofficial adaptors also seem to exaggerate these contact issues.
Source:
Mobile01 forum
When installed, the user had limited GPU power to 500 W and dropped the voltage limit down to 0.9 v—that's a reduction of 100 W and 0.205 v compared to stock settings. It's worth noting that the GPU in question was connected to the PSU using a 16-pin adaptor, and the connector melted at the GPU side, not the PSU side, and the first indication of the meltdown was frequent crashing during gaming sessions. Both connector ends at the GPU side seem to be affected, but it's entirely possible that the GPU would have suffered even more damage had the power limit been higher. Currently, independent research seems to indicate that the 12V-2×6 cable itself seems to suffer from an unstable or inadequate connection, which increases the current and temperature across individual pins. Unofficial adaptors also seem to exaggerate these contact issues.



133 Comments on NVIDIA GeForce RTX 5090 Melts 12V-2×6 Connector Despite -100 W Power Limit
We get it.
100w reduction for the 5090 isn't enough, you need to cut at least 300w based on failures we've seen. Anything above 350w is where failure rate starts rapidly increasing (relatively speaking).
Doesn't smell right.
It's been discussed ad nauseam, most cases are on the power supply side or mechanical malfunctions. Since there are no safeties, power excursions go the only way they can: straight into the power socket. The connector can handle 600 W just fine. Under ideal conditions, of course. Which is what the PCI-SIG engineers missed here.
THIS CONNECTOR IS BAD! It's poorly designed, in many cases poorly built and is lacking in EVERY detail.
As these continuing examples mount, the public can begin to have an opportunity to take legal action for selling an unsafe product. It's going to happen if they don't replace this dumbass connector with one that is COMPETENTLY designed and built.And this is an example of why it's a problem.
This topic is just great for traffic in general, I can see why it keeps getting airtime, they'd be silly not to do it.
The connector itself is too flawed in several ways and is simply unsafe with very little power safety margin, vs. molex 8 pin.
It surely looks like the original cable.
This saga is getting old news fast. Can't we just go back to good old 6 and 8 pins. That worked great.
Why oh why did they replace what worked very well?