Thursday, February 19th 2026
NVIDIA GeForce RTX 5090 Melts 12V-2×6 Connector Despite -100 W Power Limit
The melting and burning 12V-2×6 connectors on high-end NVIDIA—and some AMD—GPUs is well documented at this point, and although there is mounting evidence to support the fact that the new connector standard itself is partially to blame, there is still the idea that high power draw is to blame for these meltdowns. This is not necessarily the case, according to one user of the Mobile01 forum. According to the forum post about the incident, the top row of pins in a Gigabyte Aorus Master Ice RTX 5090's GPU power connector has melted down, despite the user having implemented a steep undervolt and power limit.
When installed, the user had limited GPU power to 500 W and dropped the voltage limit down to 0.9 v—that's a reduction of 100 W and 0.205 v compared to stock settings. It's worth noting that the GPU in question was connected to the PSU using a 16-pin adaptor, and the connector melted at the GPU side, not the PSU side, and the first indication of the meltdown was frequent crashing during gaming sessions. Both connector ends at the GPU side seem to be affected, but it's entirely possible that the GPU would have suffered even more damage had the power limit been higher. Currently, independent research seems to indicate that the 12V-2×6 cable itself seems to suffer from an unstable or inadequate connection, which increases the current and temperature across individual pins. Unofficial adaptors also seem to exaggerate these contact issues.
Source:
Mobile01 forum
When installed, the user had limited GPU power to 500 W and dropped the voltage limit down to 0.9 v—that's a reduction of 100 W and 0.205 v compared to stock settings. It's worth noting that the GPU in question was connected to the PSU using a 16-pin adaptor, and the connector melted at the GPU side, not the PSU side, and the first indication of the meltdown was frequent crashing during gaming sessions. Both connector ends at the GPU side seem to be affected, but it's entirely possible that the GPU would have suffered even more damage had the power limit been higher. Currently, independent research seems to indicate that the 12V-2×6 cable itself seems to suffer from an unstable or inadequate connection, which increases the current and temperature across individual pins. Unofficial adaptors also seem to exaggerate these contact issues.



133 Comments on NVIDIA GeForce RTX 5090 Melts 12V-2×6 Connector Despite -100 W Power Limit
It is junk design.
Worst case is the TV remote in the kitchen. At least once year I have to open it and remove the accumulated residue, most likely fat particles from the pcb so the rubber keypad shortens each button properly again.Sorry I did not catch that. Still when the cables are moved you also have wear and tear on it.
I see it from that point. As an example. When i put on a hardware market connector for the schuko connector for the 230V AC 50Hz outlet there is a cable fixtation mechansim on it so the cable does not move. Some electronics have similar ways to prevent cable movements. Sometimes a bit of injection molding plastic is there so the connector cable can not move.
I really wonder waht the terminology is. Maybe "cable clamp" or "strain releave'". The bing search also reminded me of many other use cases where the cable is held in place so it does not have any movements. when you are unsure, google the german terminology "zugentlastung für kabel".Yes it was blurry.
Shall I take notes on how often he stumble with his explanation, how often the conector was blurry, how often he did half sentences?
Yes i watched the badly made video with not a single focused image in 1080p.
question for you? Did he showed the connector even once properly? Or was it just a clickbait video which was badly made? Can the video creator speak freely?Because it is a clickbait video, he repeats himself and the connector is blurry.
Daniel Owen
@danielowentech
•
288k subscribers
•
1.5k videos
A "content creator" with 1500 videos should konw how to make a video. How to render it. How to use lights.
I'm sure I will find jay2cents quality when I would watch 3 random picked videos.
It seems that content creator also uses the tactics to use a face impression on the video preview to attract viewers. I forgot which tactics it is, but it works in the human brain when you are unaware of the effect.
Qucik scrolling back until "1 year ago" only shows graphic card contents and graphic card related content.
too many plug and unplug cycles, the same as also "jay2cents" made a video months ago.
I am well aware of some think such videos are like gold and think all the statements are valid. two or three split videos with "performance claims".
The worried look to the mafia game was not made identional, right? (one part screenshot is more than enough)
I have different standards when it is not a "content creator", aka professional youtube with hundreds of videos, who reports his own issue badly phrased and expressed on reddit.
1500 videos are more than enough to have learnt on how to do it. 1500 videos were enough time to read comments below and improve.
It seems i prefer the random reddit post with a few blurry pictures over such lengthy video with zero to none information.
He does something right when he gets nvidia hardware for free and his oldest video is only 5 years old according to youtube. good job on the free stuff and on the subscriber numbers
And why are you focusing on the video quality instead of what’s actually happening? Which is more important—yet another case of a melted connector or the video quality? Is this the first time you’ve seen a melted connector, and that’s why you want a very high-quality video so you can examine it in detail?
Yes, of course, this is a clickbait video, like millions of others on YouTube, all created for clicks. And yes, he’s just using the incident to get more clicks. And yes, the video isn’t professional and he probably shot it with his phone, simply because when things like this happen—people use whatever they have on hand, which is a pretty normal situation.
They present a valid and meritful example of the continuing problem with this unsafe power connector and you are taking pot-shots at him because you disagree with his conclusions? That is the lowest form of what-about-ism nonsense..
Do you mean that this/any video showing melting is fake and that there's no problem?