Thursday, May 21st 2026

Fraunhofer IPMS Develops High-Density Chiplet Systems at the Wafer Level

Breakthrough in chip manufacturing: As part of the European APECS pilot line, researchers at Fraunhofer Institute for Photonic Microsystems IPMS have developed a method that allows different chip components to be fused almost seamlessly into a single unit. By precisely embedding small chiplets into specially structured silicon pockets, Fraunhofer IPMS succeeded in combining the advantages of a compact single chip with the flexibility of modular systems for the first time. This achievement demonstrates the feasibility of quasi-monolithic integration (QMI) and bridges the gap between traditional chip packaging and cutting-edge semiconductor manufacturing.

Growing demands for greater complexity, computing power and system compactness are calling for a radical rethink of semiconductor manufacturing. The vision for future-proof microelectronics is to create systems that are as powerful as a single chip yet offer the flexibility of modular building blocks. Within the APECS pilot line, which focuses on "Advanced Packaging and Heterogeneous Integration for Electronic Components and Systems", Fraunhofer IPMS is pursuing the quasi-monolithic integration (QMI) approach. The aim is to integrate various chip components, such as control electronics, sensors and microelectromechanical systems (MEMS), at the wafer level, while retaining the benefits of a compact single chip.
From Theory to Reality: Pockets, Placement and Embedding
Researchers at Fraunhofer IPMS have successfully achieved the first critical milestone of the QMI roadmap. "The basis of QMI is silicon wafers with structured recesses, or pockets. For the first time, dummy chiplets have been inserted into these pocket wafers and the surface has been levelled with a passivation layer in preparation for subsequent back-end-of-line wiring," explains Dr. Lukas Lorenz, group leader at Fraunhofer IPMS. "This creates a nearly monolithic system architecture that combines the highest integration density with modular scalability." This success paves the way for the industrial maturity of the entire process chain for future applications.

Technological advantages: Higher system performance with maximum compactness
QMI technology offers significant advantages over conventional packaging processes. This is due to the way chiplets are arranged on an active or passive wafer substrate with a shared interconnect stack. Since the interconnects are formed in the front-end-of-line process, much higher connection densities can be achieved than with traditional methods. The following benefits result:
  • Higher performance: Shorter signal paths reduce losses and latency, thereby increasing processing speed at the system level.
  • Reliability: Reducing mechanical interfaces increases the robustness and operational lifetime of the systems.
  • Compactness: QMI saves a significant amount of space because the elements are integrated in a nearly monolithic fashion.
  • Cost-efficiency: Combining modular chiplet approaches enables highly cost-effective integration, short innovation cycles, and high scalability.
These advantages make quasi-monolithic integration ideal for innovations such as highly integrated system-on-chip (SoC) solutions for artificial intelligence (AI) applications and high-bandwidth smart transceivers.

Next Steps Toward Industrial Deployment
Dr. Lukas Lorenz emphasizes: "Although the current demonstrator is based on dummy structures, the process chain can be transferred to real-world customer applications. This enables a scalable integration architecture for future heterogeneous system solutions." Fraunhofer IPMS is targeting industrial partners whose products could benefit from the integration of different high-density technologies. The approaches developed within the APECS framework form the basis for quickly transferring QMI to production-oriented manufacturing environments.
Source: Fraunhofer IPMS
Add your own comment

3 Comments on Fraunhofer IPMS Develops High-Density Chiplet Systems at the Wafer Level

#1
Chomiq
Oh, it's the guys from MP3 codec.
Posted on Reply
#2
FreedomEclipse
~Technological Technocrat~
ChomiqOh, it's the guys from MP3 codec.
I was thinking the exact same thing 🤣




The good old days of AudioGrabber.
Posted on Reply
#3
FrozenPie1
ChomiqOh, it's the guys from MP3 codec.
Not quite. The MP3 Codec was from the "Fraunhofer IIS" (Fraunhofer Institute for Integrated Circuits) while this currently is from the "Fraunhofer IPMS" (Fraunhofer Institute for Photonic Microsystems). Both belong to the non-profit "Fraunhofer Society for the Promotion of Applied Research" but are largely independent institutions. They have many more subsidiaries (75 and growing) which do quite a lot of advanced research, especially in the area of energy systems and the like.
Funnily enough: AFAIK the (much higher than expected) license revenue generated from the MP3 codec made the Fraunhofer as big as they are today with all their subsidiaries. Without it, it is unlikely that they would have succeded at that time or at least would only be a fraction of their current size.
Posted on Reply
Nov 17th, 2026 13:14 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts